Check engine bearings and rotating parts if there is significant driving noise.
如有明显行驶噪音，检查发动机轴承和旋转部件。
In addition, the engine bearings give more power, stiffness and reliability in the high-performance kart.
此外，发动机轴承给予更多的权力，刚度高性能卡丁车和可靠性。
This reduces the inertia load on the engine bearings and, in addition, makes for a more responsive engine.
这就减少了发动机轴承上的惯性负荷，使发动机反应更加灵敏。
If oil pressure was low and pump is within specifications, inspect for worn engine bearings or other reasons for oil pressure loss.
如果油压低并且泵在规格表内，则针对油压低的问题检查磨损的引擎轴或其它原因。
SKF Racing Unit has provided the team with bespoke technical kart solutions, designed for kart wheel applications, and engine bearings.
SKF进口轴承赛车组提供了卡丁车轮应用而设计的定制卡丁车技术解决方案，以及发动机轴承的团队。
To extract early fatigue feature of engine bearings, the paper presents an average spectrum method with double-wavelet and the diagnosis examples are used to show the validity of the method.
为了提取机车滚动轴承早期损伤类故障特征，本文提出了一种双重小波平均谱方法，并通过诊断实例验证了方法的有效性。
The crankshaft revolves in bearings located in the engine crankcase, but the number of bearings used usually depends on the number of cylinders in the engine, and the design of the engine.
曲轴在发动机曲轴箱带动轴承旋转，但是轴承的数量通常由发动机内气缸的数量和发动机的设计来决定。
Allows faster pumping of oil to the bearings and camshaft for greater protection when starting your engine.
当您启动发动机的时候，可以更快地把机油泵送到轴承和凸轮轴上，从而能够更迅速地保护发动机。
The foundations of shaft bearings of the main engine and aux engines shall be sufficient strength in consider easy for draining, cleaning and maintenance.
主辅机的轴承底座应该具有足够的强度，同时需考虑便于排水、清扫及维护。
This section describes the servicing of crankshafts, main bearings, and engine Blocks and cylinders.
本节介绍曲轴、主轴承、发动机机体和气缸的维修。
The main shaft bearings of aircraft engine are key parts of plane, its reliability and life affect directly on the reliability and life of engine and even whole plane.
航空发动机主轴轴承是飞机关键部件的关键零件，其可靠性和寿命直接关系着发动机乃至飞机的可靠性和寿命。
While the actual stiffness of engine stator is used for modeling, the stiffness of bearings is linearized by iteration to avoid the non linearization of the whole engine.
确定计算模型时，发动机定子按实际刚度；为了避开整机非线性问题，轴承刚度采用迭代算法进行线性化。
An engine accident by slipping of shrink fit crankshaft which caused severe damage of two main bearings is analyzed.
对主机曲轴红套滑移，并使二道主轴承严重损坏的机损事故进行了分析。
All over the world, INA develops and produces rolling bearings, plain bearings and linear guides for machine building and engine components for the automotive industry.
INA在全世界范围开发并生产滚动轴承、滑动轴承、直线运动产品和汽车发动机部件。
To simulate combined testing for all of the important bearings on aviation engine main shaft, a shafting bearing tester is designed.
为模拟航空发动机主轴轴系所有重要轴承联合试验，研制了航空发动机轴系轴承试验机。
In the engine, oil is supplied to crankshaft and camshaft journals rotating in their supporting bearings.
在发动机里，机油被供应到旋转在其支承轴内的曲轴和凸轮轴轴颈上。
Rolling Element Bearings - Aircraft Engine, Engine Gearbox, and Accessory Applications - Eddy Current Inspection.
滚动轴承。飞行器发动机，发动机齿轮箱及辅助设施。涡流检验。
Elastomeric Bearings, Engine Mounts, Avionics Mounts, Tuned Vibration Absorbers, Tension-Torsion Straps, Dampers.
弹性体轴承，发动机支架，电子设备支架，调谐吸震。
This paper analyses the reasons causing galvanic corrosion on main shaft journal and main bearings of main diesel engine, and the protection measures are also introduced.
主要分析并介绍了船用主柴油机轴系产生电化腐蚀的原因和防范措施。
Features: Using the world famous HONDA gasoline engine-HONDA, Japan's NHK bearings, machine adopts advanced technology in Japan, stepless variable speed, superior performance.
产品特点：选用世界名牌本田汽油发动机-HONDA，日本NHK轴承，整机采用日本先进技术，无极变速，性能优越。
The operation conditions and wear of crankshaft bearings in internal combustion engine are discussed in this paper. A model and method for calculating the crankshaft journal wear are given.
本文讨论了内燃机曲轴轴承副的工作状况和磨损，给出曲轴轴颈磨损的计算模型和计算方法。
The operation conditions and wear of crankshaft bearings in internal combustion engine are discussed in this paper. A model and method for calculating the crankshaft journal wear are given.
本文讨论了内燃机曲轴轴承副的工作状况和磨损，给出曲轴轴颈磨损的计算模型和计算方法。
应用推荐