Although most Linux systems run on PC platforms, Linux can also be a reliable workhorse for embedded systems.
虽然大多数Linux系统运行在PC平台上，但Linux也可以作为嵌入式系统的可靠主力。
Inexpensive video game peripherals with embedded accelerometers and PC devices ranging in size from laptops to hand-held phones are enabling new methods for application control.
使用廉价的电子游戏外围设备、嵌入式加速计和从笔记本电脑到手持电话等各种PC设备，可以实现控制应用程序的新方式。
This competitive dynamic simply doesn’t exist in PCs, which is actually a fascinating side-story to why Intel and Microsoft have traditionally failed in most embedded (non-PC) markets.
而个人电脑市场并不存在这种竞争的动力，这就是为什么英特尔和微软在多数的嵌入式（非个人电脑）市场会失败的原因。
A Device Manager can take many forms, ranging from something as powerful as a PC or laptop to a mobile phone or embedded-edge computer.
设备管理器的形式非常多，可以是PC或笔记本电脑，也可以是移动电话。
The typical shrink-wrapped Linux system has been packaged to run on a PC, with a hard disk and tons of memory, much of which is not needed on an embedded system.
典型的压缩包装Linux系统经过打包，在拥有硬盘和大容量内存的pc机上运行，嵌入式系统可不要这么高的配置。
Then, the software design of the embedded motion controller which based on the PC/104 bus is analyzed.
再次，论文分析了基于PC/104的嵌入式运动控制系统的软件设计。
Eurotech: Eurotech provides embedded PC SBC and sponsors ET-Linux, a complete Linux system designed to run on small industrial computers and based on glibc 2.1.2.
Eurotech： Eurotech提供了嵌入式PCSBC并资助了ET - Linux，一个为在小型工业计算机上运行而专门设计的基于glibc 2.1.2的完全的Linux系统。
It is different from PC system while it is based on special application. According to this, the hardware and software of embedded system must be specially designed.
嵌入式系统与通用PC不同，它是面向于特定应用的，为此，它无论在硬件方面还是软件方面都要满足一定实际环境的要求。
The executable PC program finally built is just the model of the target embedded software and its hardware platform.
最终生成的PC上的可执行程序就是目标嵌入式软件及其硬件平台的模型。
The hardware is constructed with embedded PC, communication card and field bus data acquisition module.
系统硬件采用了嵌入式PC、通讯接口卡和现场总线数据采集模块。
To meet the requirements of vehicle data acquisition on road test, on board data acquisition system based on embedded PC is developed.
为满足汽车研发过程中道路试验数据采集的要求，开发了基于嵌入式PC的车载数据采集系统。
Based on the research of embedded assembly program flow chart automatic building, the breakpoint setting and checking mechanism, virtual instrumentation mechanism based on the PC values are proposed.
该文在汇编嵌入式软件程序流程图自动生成的研究基础上，提出了以PC值为基准条件的断点设置、测机制以及虚拟插桩机制。
Using embedded developing technology, a new kind of bitmap browse module is designed to meet the requirement in the application field of Pocket PC.
针对掌上电脑应用领域的实际需求，采用嵌入式编程技术设计了一种图片浏览模块。
With the coming of late PC era, the rising digital network is invariably closely bound up with embedded system.
随着后PC时代的来临，新兴的数字网络无不与嵌入式系统息息相关。
This paper introduces the structure and their application development features of PC/104 embedded industry controlling computer.
介绍了嵌入式工控机PC/104的结构特点及其应用开发特点；
At present, Auto PC has become one of the most active research fields in Embedded System.
目前，车载电脑技术已成为嵌入式系统研究中一个非常活跃的领域。
With the increasing performance of PC and the sharp decreasing of its price, embedded PC is penetrating through every field of Post-PC-Era.
随着性能地不断提高和价格的大幅度下降，嵌入式PC正以锐不可挡之势迅速渗透到后PC时代的各个应用领域。
Traditional management system of USB Host on PC are introduced in embedded instruments or devices, which makes convenience of data transport of these devices and instruments.
这将传统的个人计算机上的USB总线管理体系微型化，使用到嵌入式设备内部，使得嵌入式设备的数据传输更为简洁。
The main works include:(1) Selection of embedded PC, GPRS, GPS modules and other peripheral equipments.
所作的工作主要包括：（1）嵌入式计算机模块的选型，GPRS、GPS接收模块的选型、其他外设的选型。
In an digital imaging embedded DSP system design, it is necessary to realize the communication between embedded DSP system and PC for its cross-development system and its debug.
在数字成像嵌入式DSP系统开发中，为搭建交叉开发平台，便于系统调试，常常需要实现嵌入式DSP系统与计算机之间的通信功能。
In a digital imaging embedded DSP system design, it is necessary to realize the communication between embedded DSP system and PC for its cross-development system and its debug.
在数字成像嵌入式DSP系统开发中，为搭建交叉开发平台，便于系统调试，常常需要实现嵌入式DSP系统与计算机之间的通信功能。
This paper presents CH375 bus interface chips, the USB communication between PC and embedded medical equipment, and the relative procedure code.
介绍了USB总线接口芯片CH375，并在此基础上实现了PC与嵌入式医疗设备的USB通讯，给出了相关的程序代码。
The interface can be used in embedded system which need fast switch between USB host mode and slave mode. And it can be communicated with U disk in host mode and PC in slave mode.
最终实现了嵌入式系统USB主从模式的快速切换以及在主机模式下与U盘、从机模式下与PC机的通信。
PC - 104 bus is the standard for embedded computer. Embedded computer is especially fit for control at industry field.
104总线是嵌入式PC机的总线标准，嵌入式PC机特别适用于工业现场控制。
In order to link embedded computer to CAN bus, an adapter card with CAN bus interface and PC - 104 bus interface has been designed.
为了将嵌入式PC机联人CAN网络，设计了一种既具有CAN总线接口又具有PC - 104总线接口的适配卡。
Research on the question of the use of the top - bottom machine structure in the radiofrequency ablation treatment for the design, the top is PC and the bottom is MCU embedded systems.
本课题研究使用上下位机结构的射频消融治疗仪的设计，上位机为PC机，下位机为单片机嵌入式系统。
The paper introduces both principle and hardware structure of portable X ray fluorescence analyzer based on PC/104 embedded computer.
本文介绍了一种基于嵌入式微机的X荧光仪工作原理与硬件结构。
The paper introduces concept, content and architecture of open network CNC, analyze Real-time of CNC and establish a platform of open network CNC of NC-embedded PC structure.
论文详细阐述了开放式网络化数控系统的概念、内容及其体系结构，并对数控系统的实时性进行了分析，建立了一种NC嵌入PC型数控系统的软硬件结构。
If current trends in electronics are any indication, then growth will occur in the embedded but not the PC space.
如果目前电子产品的趋势是任意的，那么经济增长将发生在嵌入式而不是电脑的空间。
In this paper, a high performance digital servo-system based on an embedded PC is studied.
本文研究了一种以嵌入式PC作为控制计算机的高性能位置伺服系统。
应用推荐