IMPORTANT: Removal and replacement of the heating element involves the disconnection of water piping connections and electrical connections.
重要：加热元件的拆卸和更换涉及到水管的拆卸和电路连接的断开。
Simulating the deformation of the steel plate by induction heating in Finite Element Method(FEM), including temperature analysis, stress analysis and deformation analysis.
对钢板感应加热成型进行有限元分析，包括钢板截面的温度分析，应力分析，变形分析等。
The purpose of the electric heating element in the choke is to assure slower choke opening.
在阻风门内的电热元件的效用是保证阻风门缓慢开启。
The micro gas pressure sensor designed in this thesis can be fabricated using an IC compatible process, and it is composed of a heating resistor, a sensitive element and a testing resistor.
本文设计的微气压传感器的制作工艺与集成电路工艺兼容，结构上主要包括加热电阻、敏感元件和测试电阻等三部分。
It is expected that the program could be used as a software in the design of heating element placement to improve the properties of the furnace.
使用该算法，合理布置加热元件，可使圆柱管式炉的等温性能获得较大改善。
The technology accomplishes this by providing for the fitment of a cartridge heating element near the mold's lower edge.
技术完成这项由提供装修的墨盒加热元件附近的具较低的优势。
The sensor (10) also includes a cavity formed under the diaphragm layer (16) and is configured to provide thermal isolation of the heating element.
传感器（10）还包括形成于隔膜层（16）下面的空腔，并配置成提供加热元件的隔热。
A new type of passive solar heating element, fluid convective thermic diode with partition, is developed.
对一种新型的太阳能采暖部件——隔板式液体对流二极管进行了实验研究。
Contains a heating element of 2 kW, circulator, safety temperature limiter, and constant temperature control.
包含2千瓦加热元件，循环器，安全温度限制器以及恒温控制。
PEP - II gear pump and specification of pump matching element, which can ensure the user's choice, fast heating and heat control.
PEP-II齿轮泵带有与泵的规格相匹配的加热元件，可供用户选配，这可保证快速加温和热量控制。
Made out of stretch neoprene with a build-in heating element, stretches to fit most baby feed bottles.
潜水材料制成，内置远红外碳纤维加热片。良好的伸展性可满足大多数奶瓶的需要。
The probe is used as both heating element and temperature measuring element. The principle of measurement system is negative feedback.
探头在测量时既作加热元件，又作感温元件，测量系统采用负反馈原理。
A compact, reliable source of steam for space and process heating, these immersion element boilers are virtually 100% energy efficient.
该产品提供紧密、可靠的蒸汽空间和工艺加热，这种侵入式的锅炉能源利用率可达到100%。
The effect of the third phase on the heat resisting and strength of molybdenum disilicide heating element was discussed.
重点讨论了第三相对二硅化钼发热元件的耐热性能和机械强度的影响。
The heating module includes a PTC type heating element in conduction with a base plate and a number of heat exchanger fins.
加热模块包括与基板和多个热交换器散热片进行传导的PT C类型加热元件。
The system enters the standby mode when the handle come back to the holder. It can save the energy and extend the life of heating element.
自动休眠，热风焊台手柄放置焊台架上，机器将自动进入休眠状态，节省能源，延长发热体的使用寿命。
The experiment of time sequence observation of laser orientation angel for transmitting laser beam through an optical element under heating of powerful laser has been carried out.
对在强激光作用下的光学元件的透射激光方向角进行了时序观测。
A heating element is designed using resistance heating silk and printed board, and an instrument of temperature measurement and control is designed using transistor as the temperature sensor.
介绍利用电阻加热丝、印制基板材料设计制做的加热元件和用晶体管作温度传感器设计制做温度测量控制器的电路工作原理及其在物理实验中的应用。
Low power rate on the surface of heating tube. Medium does not scale, congeal, sinter or carbonize on the surface, and so is ideal heating element for viscous, and heat sensitive liquid medium.
加热器管表面功率负荷低，介质不会在表面结垢、粘结、烧焦、碳化等，是粘性、热敏性液体介质加热的理想元件。
The heating element is screwed up by high resistance alloy wires and installed on the hearth's two sides, the rear wall of the furnace bottom and the furnace door.
加热元件的由高电阻合金丝绕制成螺旋状，安置在炉膛二侧，炉底后墙及炉门上。
This paper studies the thermal lensing effect of optical element under laser heating at non-thermal equilibrium state.
研究了强激光作用下非热平衡状态光学元件的热透镜效应。
Temperature is sensed by a heating element of the hair straightening plate and temperature is regulated by an option switch.
本发明的温度控制器设于手柄内，通过直发板的电热元件来感觉温度，通过选择开关调节温度。
The temperature field of a large forged back-up roll during differential heating and cooling was simulated with a computer based finite element method.
利用热处理温度场的计算机模拟软件计算出大型锻钢支承辊锻件差温加热及冷却时的温度场。
Based on these equations, continuous induction heat treatment of the thick wall tube, including heating, quenching and tempering, is simulated by finite element method on ANSYS software.
基于这些方程在ANSYS软件上实现了对厚壁筒形工件连续感应热处理的计算机模拟计算。
The system has the cold wind function, it can protect the heat gun and extend the life of heating element.
系统设有自动冷风功能，可延长发热体寿命及保护热风枪。
The thermal medium print starting position is located under a heating element of the thermal printhead.
热敏介质的印刷起始位置位于感热式印刷头的加热元件下面。
The heat dissipating device for the expansion card can further dissipate heat of the heating element of the expansion card to improve the heat dissipating efficiency of the whole system.
所述扩展卡散热装置可进一步给所述扩展卡上的发热元件进行散热，以提高系统整体的散热效率。
In this paper the 3 dimensional finite element analysis for transverse flux induction heating (TFIH) of continuously moving thin steel strip for galvanizing line are presented.
对镀锌生产线上连续运动的薄钢板的横向磁通感应加热过程应用了三维有限元分析。
In this paper the 3 dimensional finite element analysis for transverse flux induction heating (TFIH) of continuously moving thin steel strip for galvanizing line are presented.
对镀锌生产线上连续运动的薄钢板的横向磁通感应加热过程应用了三维有限元分析。
应用推荐