The conclusion shows that the nonlinear factor of electromagnetic material results in the density of stimulated current to be related to the position of the remote field.
结果表明：铁磁材料的非线性因素导致激励电流密度与二次穿透区的位置直接相关联。
And adopting the optimization design, high conductivity, the electromagnetic material production equipment in no-load loss low power output, more powerful, and stability, long service life.
并采用优化设计、高导电磁材料制作，致使设备在空载时损耗低、功率输出更强劲、稳定、寿命更长。
But when supermassive black holes at the center of a galaxy feed, the material falling into them heats up, giving off a bright glow across the electromagnetic spectrum.
然而，当星系中心质量超级大的黑洞“吞食”时，落入其中的物质便会升温，发出一道明亮的光，通过电磁波频谱可以显示出来。
The computation methods of electromagnetism parameters, electromagnetic wave frequency and medium slice thickness in microwave measuring for composite material were analyzed.
分析了复合材料微波检测中电磁参量、电磁波频率和介质薄片厚度的计算方法。
The basic absorption mechanism of the microwave - absorbing material was studied, and its interaction on the electromagnetic wave was also studied.
就吸波材料与电磁波的相互作用及其损耗机理进行了阐述。
Electromagnetic casting (EMC) is an original material processing technology and a comprehensive subject based on magneto-hydrodynamics (MHD) and combined with metallurgical engineering.
电磁铸造技术是建立在电磁流体力学基础上，并与冶金工程相结合的先进材料加工方法。
As the key facility of electromagnetic stirring welding technique, the welding electromagnetic stirring device has direct effect on mechanics study and quality control in material processing.
焊接磁搅拌装置作为电磁作用焊接技术研究中的关键设备，对于材料加工过程的机理研究和质量控制有着直接关系。
Conductive gasket material is one of the most widely used shielding materials at present, and plays an important role on the suppression of electromagnetic slot -leakage in electronic equipment.
导电衬垫材料在抑制电子设备缝隙电磁泄漏中发挥了重要作用，是目前电子设备中应用最为广泛的一类屏蔽材料。
The main use of plastic material itself insulation, small density, no electromagnetic interference, corrosion resistance, waterproof performance, so as to realize its protective effects on screw.
主要利用塑料材料本身的绝缘、密度小、无电磁干扰、耐腐蚀、防水等性能，从而实现其对螺丝的保护作用。
The formulae of reflecting coefficient are derived from the theory of electromagnetic field for arbitrary incident electromagnetic wave to radar absorbing material.
从电磁场理论出发，推导出了电磁波以任意角入射时雷达吸波材料的反射系数公式。
Radar absorbing material could realize the stealth of aircraft through transforming the electromagnetic wave into other state of energy in order to reduce the radar cross section of aircraft.
吸波材料通过把电磁波转化为其它形式的能量来降低目标的雷达散射截面，从而实现目标隐身的目的。
Not only the frequency response of electromagnetic parameters of absorbing material must be known in some cases, but also its temperature response.
在某些用途上，不仅需知道吸波材料电磁参数的频率响应，还需了解吸波材料电磁参数的温度响应。
Both electromagnetic wave absorber material and electromagnetic wave absorber are two different concepts.
该文指出电磁波吸材料和电磁波吸收体是二种不同的概念。
Results showed that the conductive performance of glass fiber with copper plating increased greatly so that the material could use as electromagnetic shield.
研究表明，玻璃纤维化学镀铜后，可提高导电性能，并用作制备电磁屏蔽材料。
The absorbing property of radar absorbing material is usually expressed by the power reflection coefficient of the absorbing material toward the electromagnetic wave.
雷达吸波材料的吸波性能通常以吸波材料对电磁波的功率反射系数来表示。
The latest progress on applications of PANI composites in the fields of sensor, electromagnetic shielding, metal anti-corrosion, antistatic material, and so on is reviewed.
综述PANI复合材料在传感器、电磁屏蔽、金属防腐和抗静电材料等领域应用研究的最新进展，并指出了影响PANI复合材料性能的因素。
It is believed that the slurry making method using electromagnetic stirring which is contactless stir ring will be suitable for high melting point iron and steel material.
笔者认为电磁搅拌制备浆料方法中的搅拌是无接触搅拌，更适用于高熔点钢铁材料。
The source, damage, evaluation and protection about electromagnetic radiation are introduced. Research status about protection material for electromagnetic radiation in home is proposed.
介绍了电磁辐射的常见辐射源及其危害、评价、防护方法，阐述了国内电磁辐射防护材料的最新研究动态。
Wood material is treated with electroless plating, and the preparation of wood electromagnetic shielding material is regarded as a new type material for eliminating electromagnetic pollution.
本研究采用化学镀的方式对木材进行处理，制备出的木质电磁屏蔽材料是一种新型消除电磁污染的材料。
Whether thermal field of hydro-generator is rational or not affects its security directly, however the thermal field lies on the distributions of cooling material and electromagnetic losses.
水轮发电机的温度场分布是否合理直接关系到电机的安全运行，而温度场的分布又取决于冷却介质和电磁损耗的分布。
The gauge may include an electromagnetic sensor operable to measure a response of construction material to an electromagnetic field.
材料性质测量计包括可用于测量建筑材料对电磁场的响应的电磁传感器。
Electromagnetic forming was applied to the powder material compaction, and PZT powder was compacted with low-voltage electromagnetic compaction.
将电磁成形技术用于粉末材料致密度研究中，以PZT粉末为研究对象，对其进行低电压电磁压制成形。
Further, the electromagnetic sensor may be operable to produce a signal representing the measured response by the construction material to the electromagnetic field.
此外，电磁传感器可用于产生表示测得的建筑材料对电磁场的响应的信号。
In order to deeply study the electromagnetic field, first we must measure the magnetization characteristic of magnetic material with high accuracy.
为了能够更加深入的对电磁场进行研究，首先必须能够精确的测量出磁性材料的磁化特性。
Most of electromagnetic wave are reflected by the surface of the metal bulk material, and the transmission can be neglected.
对于金属块体材料，电磁波的大部分能量在金属的几何表面被反射回去，其透射忽略不计。
The giant magnetostrictive transducer, using a giant magnetostrictive material as a main element, can transform electromagnetic energy into mechanical energy.
超磁致伸缩换能器是利用超磁致伸缩材料将电磁能转化为机械振动的一种机械装置。
The melt of aluminum alloy in the electromagnetic field was stired by different stirring power and the microstructure of the material that was got from different stirring technology was observed.
采用不同的搅拌功率对铝合金熔体进行电磁搅拌，观察与分析几种搅拌工艺下得到的材料显微组织。
The melt of aluminum alloy in the electromagnetic field was stired by different stirring power and the microstructure of the material that was got from different stirring technology was observed.
采用不同的搅拌功率对铝合金熔体进行电磁搅拌，观察与分析几种搅拌工艺下得到的材料显微组织。
应用推荐