The reason of nonlinear error caused by output voltage in common electric bridge as the sensor is analyzed.
分析了一般电桥电路作为传感器其输出电压产生非线性误差的原因。
Commonly used has the galvanometer, the amperemeter, a volt idea, the electric bridge, the potential difference counts and so on.
常用的有电流表，电流表，电压的概念，电桥，电位差计数等。
This paper introduces a number of methods of outer orray in parameter design, illustrated by an example of Whiston Electric Bridge.
本篇通过惠斯登电桥这个案例介绍了参数设计中外表设计的各种方法，并对各种方法进行了比较。
Three methods on measuring high resistance improved electric bridge method, voltage method, and comparative method are introduced in the article.
分析了三种测量高值电阻的方法：改进电桥法、电压法、比较法，并用这三种方法对同一高值电阻进行了测量。
This paper described a principle of determining internal resistance of the battery by imbalance electric bridge, and presented its experiment design.
阐述了不平衡电桥法测量电池内阻的原理，给出实验设计，测量结果与电位差计法相比可提高测量精度。
The controller of aiming control platform (ACP) is composed with AT98C2051, Voltage comparing circuit, electric bridge and digital potentiometer X9241.
瞄控台自动控制器由at98c 2051、电桥和电压比较电路及数控电位器x 9241组成。
Ordinary non-balance electric bridge sensitivity characteristics research abstract: sensitivity is the important performance. Balance bridge The single …
非平衡电桥灵敏度特性研究摘要：灵敏度是非平衡电桥的…
Using the characteristic of integrated operational amplifier, an electric bridge circuit sensor without nonlinear error in its output voltage is designed.
利用集成运算放大器的特点，设计了输出电压无非线性误差的电桥电路传感器。
This text analyses several kinds of wiring principles in the low resistance measure by double arms Electric bridge. Point out the necessity of correct wiring.
本文对双臂电桥测量低电阻中的几种接线原理进行分析，指出正确接线的必要性。
A number of methods of electric bridge to measure resistance are introduced. The scope of the application and the means of improving every method are analysed.
本文对测量电阻的多种电桥法进行了介绍，并分析了各种方法的使用范围及改进方法。
Analyzes the method of auto balance, parameter calculation, hardware circuit and software flow chart of electric bridge of NDP in the non -destructive testing of EED.
分析了NDP在电火工品无损检测中电桥自动调平衡的方法、参数计算及硬件电路和软件流程图。
In the monomer weighing aspect, this paper using the function chain neural network method to model building and study , Compensation electric bridge misalignment error.
在单体称量方面，本论文运用函数链神经网络方法建模学习以补偿桥路的非线性误差；
The plug-ins, in turn, are a bridge towards all-electric vehicles.
该插件是过度到全电能汽车的桥梁。
The teaching of basic theory in Electric specialty is a bridge, which has linked the ordinary education with professional education in undergraduate course of Electric specialty.
电气专业基础课是电气专业本科教育中基础课程与专业课程间的桥梁和纽带。
We briefly explain the origin of electric drift of the bridge offset and use these results to eliminate the temperature drift for the bridge offset output at zero pressure.
并结合实验结果对模拟结果进行分析，并简要地论述了电桥零点输出电漂移的起因以及如何利用这些结果来消除热零点漂移。
Before now the research on seismic safety of nuclear power station focused into principal structures and was behind in electric cables bridge frames.
以往有关核电站抗震安全性的研究主要集中在主体结构上，对于电缆桥架方面的研究比较薄弱。
The electric power customer service center links up the electric power supply enterprises and electric power users effectively. It becomes the bridge and tie to link both up.
电力客户服务中心将供电企业与电力用户有效的联系起来，成为沟通二者的桥梁和纽带。
Moonlight draped the now distant hump-backed bridge like shimmering gossamer , and the electric lights at the bridge's either end could be seen only dimly.
圆拱桥已经留在后面了。 它沐着月光像是披了一条纱，有点模糊，桥畔的几盏电灯在朦胧中发亮。
The two-arm bridge measuring low resistance circuit of MCU control, multivibrator measuring electric capacity, auxiliary leveling bridge circuit, output display circuit are designed.
设计了单片机控制双臂电桥测量低电阻电路、多谐振荡测量电容电路、辅助调平电桥电路、输出显示等电路。
The test shown that the electric igniting parameters and igniting time of this kind of fuse head with a wrapper on its bridge wire are both better than that of common bridge wire fuse head.
试验证明，这种涂覆式桥丝电点火头的电发火参数和发火时间的精度均有所提高。
In our opinion, hybrid technology will bridge a gap and then electric drive will become more important.
在我们看来，混合动力技术将会作为一个重要过渡，而之后电力驱动将变得更加重要。
The overhead bridge in electric railway is an important factor for the contact system to operate in a safely and reliably.
电气化铁道跨线桥是影响接触网安全可靠运行的一个重要因素。
The experimental result showed that the electric capacity of tea measured with a numerical LRC bridge can be used to evaluate the tea quality, the rate of correct examination is above 94 %.
试验结果表明，采用LRC数字电桥，对以电容为主要依据的多项电特性参数值的测定，能检测茶叶的综合品质，正确判别率达94%以上。
This paper analyses and researches full-digital control system of container loading bridge, based on the electric-control system technology transform item of container loading bridge for a harbor.
本文是在为某港的集装箱装卸桥的电控系统进行技术改造的工程项目的基础上，对集装箱装卸桥的全数字控制系统进行了比较全面的分析和研究。
Because it has a high working temperature, the high temperature strain gauge is necessary in composing the strain measurement electric-bridge.
由于工作温度较高，所以需采用高温应变片来组成应变测量电桥。
The program PSPICE is used for simulating the bridge circuit of pressure sensor with the nonlinear resistor model to show properties of electric drift as well as thermal drift.
利用PSPICE程序结合非线性电阻模型来模拟压力传感器的电桥电路，可显示零点电漂移和热漂移特性。
At present, the cable pulley is widely used in all kinds of general bridge (the door) mobile power supply cranes, electric hoist car, warehouse, shipyard, dock hoisting equipment.
目前，电缆滑车广泛应用于各种通用桥(门)式起重机、电动葫芦自行小车、仓库、船厂、码头等起重设备的移动供电。
The full temperature automatic compensation circuit of bridge type is designed, which can improve the temperature stability, the major performance norm of the miniature specific electric machine.
设计了全温度自动补偿电路，提高微特电机主要性能指标的温度稳定性。
The test shown that the electric igniting parameters and igniting time of this kind of fuse head with a wrapper on its bridge wire...
试验证明，这种涂覆式桥丝电点火头的电发火参数和发火时间的精度均有所提高。
The electric timing system of the main lifting structure on bridge crane is researched in this paper for providing a reference to the improvement of the electric controlling system.
主要研究桥式起重机主起升机构调速系统，为工厂桥式起重机电控系统改造提供一种参考。
应用推荐