In this research work, the thermal elastic-plastic method is used to analyze the dynamic thermal stress in the stress-frame specimen during its solidification and cooling process.
本研究用热弹塑性方法分析铸造应力框自凝固到冷却过程动态热应力。
The method was not only suitable for ideal elastic plastic materials, but suitable for the normal materials with hardness trend.
该方法不仅适用于理想弹塑性材料，而且适用于常规的具有硬化趋势的材料。
With the dynamic explicit elastic plastic finite element method, the unsteady deformation of the bite stage in slab rolling was simulated.
采用显式动力学弹塑性有限元方法，对平板轧制过程中咬入阶段的非稳定变形进行了数值模拟。
According to the basic design theory, the bridge design method can be divided into: the elastic design method and the plastic method.
钢桥的设计方法按其设计理论大体可分为弹性设计方法和塑性设计方法。
This paper presents the elastic plastic analysis results of mono strand anchor head by the finite element method.
本文采用有限元方法给出了单孔锚具的弹塑性分析结果，分析了摩擦系数对锚具性能的影响。
The effect of elastic modulus of adhesive on the str ess distribution in aluminium alloy single lap joint was investigated using elastic-plastic finite element method(FEM).
运用弹塑性有限元法，研究了胶粘剂弹性模量对含间隙的铝合金单搭接接头上应力分布的影响。
The structural analytical method of elastic-plastic earthquake responses can be separated into macroscopic method and microscopic method.
对于钢筋混凝土结构的弹塑性地震反应分析方法可以分为微观方法和宏观方法。
The thermal stress in magnetron sputtered al coating on uranium substrate was studied by thermal elastic plastic finite element method (FEM).
对铀表面磁控溅射沉积铝镀层的热应力进行了热弹塑性有限元分析。
Furthermore, the failure assessment curve method is a feasible method for notch elastic-plastic fracture assessment.
进一步说明失效评定图方法也是缺口弹塑性断裂评定的极好方法。
The resilient deformation in roof hood stampings of automotive cabs has been calculated by means of engineering elastic and plastic mechanics method.
采用了工程弹塑性力学的方法对汽车驾驶室顶盖的回弹进行了计算。
The target displacement of a structure can be predicted by capacity spectrum method, where the demand curves are often constructed by elastic-plastic response spectra.
能力谱法可以用来估计结构的目标位移，在该方法中弹塑性反应谱常用于需求曲线的建立。
The J integral values in the vicinity of the crack tip in welded joints were numerically analyzed by using the plane stress elastic-plastic finite element method.
采用平面应力弹塑性有限元法研究了含有多部损伤的焊接接头裂纹尖端J积分的变化规律。
In this paper, a relative criterion method is presented for analysing the elastic plastic stable crack propagation under biaxial loading conditions.
本文提出了一个用相对准则分析双向载荷下弹塑性裂纹稳定扩展的方法。
In this paper, facing the convergent problem of plastic forming using large incremental step, we deduced the iterative formula used in analysis of elastic-plastic plate forming finite element method.
此文针对塑性成形有限元分析大增量加载的收敛性困难，推导了用于板料成形弹塑性有限元分析的牛顿一致迭代公式。
The finite strip method in structural analysis has been extended, and elastic-plastic large deformation spline finite strip method based on the Updated-Lagrange method (U.
拓展了结构分析有限条法，基于固体力学有限形变理论的更新拉格朗日法（U 。
The energy principle is an important approach for solving the problems of elastic-plastic mechanics as well as the basis of finite element method.
能量原理是解决弹塑性力学问题的一个重要途径，它是有限元法的基础。
On the base of tests, two kinds of measuring methods adopting different standard distance of the elastic modulus of plastic concrete have been analyzed and a more reasonable method has been found.
在试验的基础上分析了塑性混凝土弹性模量采用不同标距的两种测试方法，得出了测试塑性混凝土弹性模量较为理想的方法。
In this paper, an edge-cutting AIA method is presented based on elastic-plastic large deformation finite element simulation theory.
针对板材三维冲压成形的切边回弹问题，提出了基于大变形弹塑性有限元数值模拟理论的切边处理AIA方法。
Besides that, on the basis of studying the elastic and plastic finite element method and mechanics knowledge, the paper analyze a steel continuous beam by the large analysis software ANSYS.
另外在研究弹塑性有限元法和力学知识基础上，利用大型有限元分析软件ANSYS对连续钢梁进行弹塑性分析，使塑性设计法的理论依据得以验证，并使认识更为直观。
The influence of axial force on the elastic-plastic stretch bending and sprngbackof a sheet metal is examined and a method to calculate the strain of middle layer is also given.
通过对带钢横截面上应力状态的分析，研究了纵向拉力对带钢变形的影响，给出了计算带钢中性层应变的方法。
This paper presents a simplified plastic zone method with consideration of the influences of the plastic zone length on the stiffness matrix for elastic-plastic analysis of steel frames.
对于杆件单元，本文采用了一种变刚度的杆单元模型，建立了考虑塑性铰分布长度影响的构件单元刚度矩阵。
The design method which allows some sections to be part-plastic can improve load-carrying more greatly than elastic design method does.
采用允许部分截面进入局部塑性状态的设计方法，相比弹性设计结构的承载力大为提高。
The crack tip stress-strain field of elastic-plastic materials are analysed by finite element method in the plane stress condition.
用有限元方法对平面应力条件下弹塑性材料的裂纹尖端应力应变场进行了计算。
At the same time, precise structure elastic-plastic analysis method created advantage for the performance-based design method, an advanced aseismatic design method.
同时，精确的结陶弹塑性分析方法也为先进的抗震设计方法——性能抗震设计法创造了有利条件。
In this computation a fluid-elastic plastic model and a finite difference method of Lagrange coordinate are used The parameters of shock, cavity and waveform are obtained and analysed.
在这个计算中，采用了流体——弹塑性变模量模型，使用了拉格朗日坐标有限差分方法和人造粘性，获得了冲击波、空腔和波形参数，并分析了这些参数。
The elastic and plastic problem of thin-walled curved box girders is solved with the spline finite point method and the section internal force plastics coefficient method.
采用样条有限点法和截面内力塑性系数法对薄壁曲线箱梁的弹塑性问题进行了求解。
A potential energy-threshold method was introduced to control the transformation from elastic deformation to plastic deformation and the turning degree of blush.
提出势能-阈值方法以灵活控制毛笔形变的弹塑性转化及扭转程度。
The plastic deformation propagation speeds of steels are determined by using photo-elastic coating and high speed photography method.
本文引入金属塑性变形传播概念，利用光弹法测定了两种钢的塑性变形传播速度。
Generally its bearing capacity and deformation modulus cannot be determined by the physical parameters or by the method of elastic - plastic theoretical models.
它一般不能用物理指标或弹性塑性理论模型方法确定其承载力与变形模量。
At present, The calculation method of continuous board and beam under vertical loads has two methods: elastic method and plastic method.
目前，对钢筋混凝土连续梁板在竖向荷载作用下的计算，常用的有两种方法，即按弹性方法计算和按塑性方法计算。
应用推荐