If the document is not being loaded in edit mode, then the formula simply retains that value and stops executing (see figure 1).
如果不是以编辑模式加载文档，则公式将只是保持该值并停止执行(参见图1)。
The component parses the ID and checks for a specific mode value to signify whether the document should be opened in edit mode.
该组件将解析id并检查特定模式值以表示是否应当在编辑模式下打开该文档。
The component may consume this property and just store it, pending a later operation, or it may do a single data-oriented operation, such as updating the value of an edit field.
组件可以消费这个属性并存储它，供以后的操作使用；还可以执行一个面向数据的操作，比如更新一个编辑框的值。
Writeable attributes are displayed in blue and you can edit them by clicking on them and entering the new value.
可写的属性以蓝色显示并可以通过单击它们进行编辑并输入新值。
Variable values can also be changed in the view, and if you edit a variable from the variables view, the new value assigned becomes effective immediately.
变量值也可以在视图中得到更改，而且如果您从变量视图中更改了一个变量的话，那么分配的新值就会变得立即变得十分有效率了。
When the user changes the value of the edit box, the value immediately goes to uppercase.
当用户更改编辑框的值时，该值将立即转换成大写。
After that, we need edit TARGET_ITEMID parameter, setting the parameter's value so that it is derived from the top level WI_ITEMID column table.
在此之后，我们需要编辑TARGET _ ITEMID参数，设置参数的值，这样就可以从顶级层次wi_itemid列表格中获得该参数的值。
The next step is to edit the CONTRIBUTOR_ITEMID parameter, deriving its value from the global variable used to store the contributor's item ids.
接下来的一步是编辑CONTRIBUTOR_ITEMID参数，从用于存储参与者项目ID的全局变量中得到它的值。
Either click Add and enter a required percentile value, as shown in Figure 3, or select an existing target and click Edit.
点击add并输入一个需要的百分比值，如图3所示，或者选择一个已存在的目标并点击Edit。
Then switch to Advanced in the Edit Page Properties window and click Add to add the preference com.ibm.rcp.bookmark_level with the value selection.
然后，在EditPageProperties窗口中，切换到Advanced并单击Add以添加首选项 com.ibm.rcp.bookmark_level，将值设为selection。
Next, edit the PATH environment variable by prepending the following to the existing value
接下来，将以下参数预先设置为现有值，以编辑PATH环境变量
Then no matter how the user goes to page2, the computed field contains the uppercase of the last value placed in the edit box on page1.
则无论用户如何转到page2,computed字段将包含在page1编辑框中所放置的最后一个值的大写。
To do so, go to Edit page Settings for that page and set param.sharing.scope (under Advanced options - I want to set parameters) to a non-empty value such as scope1.
为此，请转到该页面的Editpagesettings，并将param . sharing . scope(在Advancedoptions-iwant tosetparameters下面)设置为某个非空值，例如scope1。
You can manually edit the configuration file or dynamically change the value of the parameter using these commands.
您可以手动编辑配置文件，也可以使用如下命令动态地修改参数的值。
Tip: You can also edit the height item set value to adjust the total height consumed by the widget in Lotus Connections to avoid vertical scrollbars.
技巧：您还可以编辑height设置的值，通过调整小部件在LotusConnections的高度避免出现垂直滚动条。
Setting this property to a value of 0 or higher will place that line in the DataGrid in edit mode.
将该属性设置为0或更高的值将会使DataGrid中的那一行被置于编辑模式。
You also need to edit the build.properties file in the root directory of the unzipped sample-code download to change the value of the metro-home property to the path to your metro installation.
您还需要对解压后的示例代码下载根目录下的build . properties文件进行一些编辑，把metro -home属性值改成您的metro安装路径。
You also need to edit the build.properties file in the root directory of the unzipped sample code download to change the value of the metro-home property to the path to your metro installation.
另外还需要对解压的示例代码下载文件根目录中的build . properties文件进行编辑，将metro - home属性的值改为metro安装目录的路径。
For fields whose types are Date, Boolean or other fields that can be virtualized by special widgets, the corresponding widget will show in the value field when you edit the value.
对于类型是Date、Boolean的字段，或者能够通过特殊部件可视化的其他字段，当编辑它们的值时，相应的部件将显示值的字段。
You also need to edit the build.properties file in the root directory of the unzipped sample-code download to change the value of the cxf-home property to the path to your CXF installation.
另外还需要对解压的示例代码根目录中的build . properties文件进行编辑，将cxf - home属性的值改为cxf安装目录的路径。
The administrator can edit the agent in Domino Designer, set the "Run on behalf of" value to the name of the user that was disabled by the update, and enable the agent.
管理员可以在DominoDesigner 中编辑代理，将“Runon behalf of”值设置为被更新所禁用的用户的名称，并启用代理。
You can then edit the build.properties file and change the host-port value to the listening port for TCPMon.
随后可以编辑build . properties文件并将host - port值修改为TCPMon的侦听端口。
This value can be changed or edited by the operator, a Set button can be pressed, and when this is done, a property is fired off with the current value in the edit field.
该值可由操作员修改或编辑，然后可以按下Set按钮，设置之后，Edit字段的当前值将触发属性。
Extract the attachment example.zip in the Downloads section of this article, and edit the file example.properties in the directory target \ classes, changing the value of server.base.url to.
从本文的下载部分提取附件example . zip，然后在target \classes目录中编辑文件example . properties，将server . base . url的值更改为。
To do this, edit the SqlMapConfig properties file and set the value of the sql_executor_class property to com.ibm.pdq.ibatis.executor.PDQSqlExecutor.
为此，编辑SqlMapConfig属性文件并将 sql_executor_class 属性的值设置为 com.ibm.pdq.ibatis.executor.PDQSqlExecutor。
Depending on which mode the page is displayed in, the value is set to init, edit, or view.
取决于页面的显示模式，该值将设置为init、edit或view。
You also need to edit the build.properties file in the root directory of the unzipped sample-code download to change the value of the cxf-home property to the path to your CXF installation.
还需要编辑解压后的示例代码的根目录中的build . properties文件，把cxf - home属性改为cxf的安装路径。
Additionally, to make these changes persistent, you can create or edit /etc/sysctl.conf and specify all of these settings, one on each line, in the form setting=value.
此外，为了使这些更改持久化，可以创建或编辑 /etc/sysctl.conf，以setting=value的形式行逐指定所有这些设置。
Type in the Value column to edit the metadata elements for your announcement.
在“值”列中键入值，为您的公告编辑元数据元素。
Boolean value indicating whether the user is allowed to edit a selected image.
一个布尔值用来标识用户是否可以编辑选择的图片。
应用推荐