A virtual prototyping model of belt conveyor is built based on the dynamics model and analysis.
对带式输送机系统的动力学模型进行了研究。
The model considers the dynamics of converter switch circuit and can be applied in the analysis for high frequency dynamic characteristics.
该模型考虑了换流器开关电路的动态特性，适用于高频动态特性分析。
Taking the forestry economy system of Nanch 'a area in Heilongjiang province as an example, a system dynamics (SD) model is built, tested and analyzed based on structure analysis.
以黑龙江省南岔区(局)林业经济系统为例，在分析系统结构的基础上，构建了林业经济系统SD模型，并且对总体模型进行历史检验与仿真分析。
Through the analysis of the working process of this linkage system, this paper execute the dynamic simulation and optimization of this model by using multi-body system dynamics software ADAMS.
通过对肘杆系统工作过程的分析并利用多体系统动力学软件（ ADAMS）对模型进行了动力学模拟和优化设计。
Reducing the order of a large structural finite element model is important in improving the efficiency of finite element analysis in the field of structural dynamics and vibration.
对大型复杂结构振动有限元模型进行减缩降阶，是使结构有限元模型可有效地用在结构动力分析和振动计算方面的一个重要措施。
It points out the ap-plication prospect and limitations of these models - it presents several ways of coupling application of the time sequence analysis model with the groundwater dynamics model.
指出这类模型的应用前景和局限性，提出了时间序列分析模型与地下水动力学模型耦合应用的几种途径。
Analysis of port's influence on economy is conducted based mainly on system dynamics (SD), combining also input-output method, the Mulitplier, and econometrics model.
以系统动力学(SD)模型为主体，结合投入产出法、乘数法和计量经济学模型，进行了港口经济影响分析。
Force analysis of ironing mechanism of asphalt concrete paver is carried out during operation, and a dynamics model is built in hypothetical condition.
对沥青混凝土摊铺机熨平机构的作业过程详细地进行了受力分析，并在假设条件下建立了熨平机构的动力学模型。
The applicability research was done importantly for super-elements in the analysis of mode and dynamics, taking a space camera model used in the space-optics engineering for example.
以航天光学工程中实际的相机模型为例，重点研究了超单元在模态分析和动力学分析中的适用性。
From two aspects of the tire model and kinematical analysis, vehicle kinematics and force analysis, the bus dynamics model is introduced.
从轮胎模型和运动分析、整车运动和受力分析两方面介绍了客车动力学模型。
At the base of the detailed analysis of the dynamics and thermodynamics model, I deduce the two nonlinear typical models for rotating speed of ECR and the temperature of ECR.
从对其动力和热力学数学模型进行详细分析的基础之上，推算出基于电涡流缓速器转子盘转速和电涡流缓速器温度两个状态控制变量的非线性标准控制模型。
The first method was loaded tooth contact analysis(LTCA), the second method was to solve nonlinear dynamics equation and the third method is to integrate torsional vibration model with LTCA.
论述了螺旋锥齿轮动力学研究的三种主要方法，即加载接触分析（LTCA）、解多维非线性方程组的方法，以及加载接触分析与周向振动模型结合的仿真分析方法。
It focuses on establishing kinetic model and simulating dynamics by mechanic dynamics analysis software ADAMS, discussed the questions on designing its components' geometrical parameters.
重点阐述该机构的仿真模型的建立，应用adams软件对构件的动力学仿真分析，讨论设计移动导杆机构的几何参数应注意的问题。
We establish nonlinear dynamics model, make a linear stability analysis and numerical value simulation for the electrochemical oscillation phenomena observed in experiment.
针对甲醇电化学氧化过程中观察到的电化学振荡现象，建立了非线性动力学模型并对模型进行了线性稳定性分析和数值模拟。
A longitudinal and lateral decoupled dynamics model was presented based on the dynamics analysis, as the longitudinal velocity, lateral velocity and yaw rate as the states.
在车辆动力学分析的基础上，建立了以纵向速度、横向速度、横摆角速度为状态变量的车辆纵横向耦合的动力学模型。
The model of ACB mechanisms for dynamic simulation was built with multi-body dynamics simulation program ADAMS, and the dynamic characteristics were obtained by simulation analysis.
利用多体动力学仿真分析软件ADAMS，对断路器机构系统进行动态仿真建模与分析，获得其分闸过程的动态特性。
Method Statistical analysis of historical data was adopted to set up computer model of system dynamics and simulation system of Polcy-making.
方法采用历史数据统计分析，建立系统动力学模型及决策模拟系统。
The study of theory analysis and computer simulation shows that dynamics adjust characteristic of IMAC is better than that of MAC (Model Algorithmic Control).
理论分析及计算机仿真研究表明，IMAC比模型算法控制(MAC)具有更好的动态调节特性。
At the theories aspect, the adoption simple single freedom degree the system as a model, using concentrated quality and just degree, analysis the system dynamics problem as analyze method.
其次在理论方面，采用简单的单自由度系统作为模型，用集中质量和刚度，采用解析法对系统进行动力学分析。
The steps of analyzing dynamics of flexible multibody systems are further discussed, then dynamics analysis and calculation are dealt with the dome model established in this article.
进一步讨论了多柔体系统动力学分析步骤，对于本文所提出的整流罩模型进行了动力学分析和计算。
A dynamics model of the robot is used to analyse the driving torque of each joint, and the driving power of motors are decided based on the analysis results.
利用两足步行椅机器人动力学模型，分析了各关节的驱动力矩，以此确定了驱动电机的功率。
Through the force analysis of the main vibration system about the CDQ electromagnetic vibration feeder, the vibration mechanical model is established and the dynamics parameter is computed.
通过对干c DQ电磁振动给料机主振动系统的受力分析，建立振动力学模型，并进行动力学参数计算。
Based on the theory of Flexible multi-body dynamics, the model of deploy-able antenna is established, and the dynamic response and analysis calculation to large space deployable antenna is done.
基于柔性多体动力学理论，对可展开天线进行了系统建模和动力响应计算及分析。
This model offers a new theory for 3d numerical design, manufacture and the analysis of engagement, kinematics and dynamics of double circular arc gears.
该模型为双圆弧齿轮三维数字化设计、制造，啮合分析、运动学和动力学分析提供了新的理论依据。
On the basis of detailed analysis of the pipeline fluid dynamics, this paper presents a method of pipeline leak detection and location based on stable model;
本文在详细分析管道流体动力学特性的基础上，提出了一种基于稳态模型的管道泄漏检测与定位方法；
It also builds systematic dynamics model to illustrate the relationship and function of key factors in recognitive process by analysis on the organization learning process.
并通过对组织学习过程的系统动力学分析，建立组织学习过程的系统动力学模型，重点描述认知过程中主体之间的相互关系和各因素的作用。
It also builds systematic dynamics model to illustrate the relationship and function of key factors in recognitive process by analysis on the organization learning process.
并通过对组织学习过程的系统动力学分析，建立组织学习过程的系统动力学模型，重点描述认知过程中主体之间的相互关系和各因素的作用。
应用推荐