Aim To perform dynamics analysis of mechanisms with flexible links and computer simulation.
目的对柔性机构动力学进行建模和计算机模拟。
A fracture dynamics analysis is given to an accident on a gudgeon link of the miter gate of a dam.
对某水坝船闸人字门拉杆断裂事故进行断裂动力学的定性与定量分析。
Study of nonlinear dynamics analysis means for HRV has wide clinical application and study foreground.
HRV的非线性动力学分析方法的应用有着广阔的临床应用和研究前景。
Dynamics analysis of the planar metamorphic mechanisms bases on the kinematic analysis of the mechanism.
在运动学分析的基础上，对其进行动力学分析研究。
Principles and thinking of DEM was creatively introduced into dynamics analysis of the gear meshing rotor system.
创造性的把DEM的原理和思想方法引入到齿轮啮合转子系统的动力学分析中。
Based on dynamics analysis and brake shoe type arrester, its design method and steps are discussed in this paper.
在对闸瓦式制动器进行动力学分析的基础上，论述了它的设计方法和步骤，并给出了机械效益的计算公式和设计曲线图。
This method of the dynamics analysis of rotor is a good guidance for the analysis of the other similar structures.
这种方法对其它类似结构转子动力学分析有很好的指导意义。
According to the dynamics analysis result of forced parts, choose reasonably the key parts of motors, bearings etc.
根据对受力零部件的动力学分析结果，可以合理选择驱动电机、轴承等关键零部件。
To some extent, the poverty dynamics analysis can support for the result of the analysis of poverty vulnerability degree.
贫困动态的分析在一定程度上支持了贫困脆弱度的结果；
Based on the Cartesian coordinate, methods of kinematics and dynamics analysis for multi-rigid-body system are introduced.
介绍基于笛卡尔坐标的多刚体系统运动学与动力学分析方法。
But the longitudinal dynamics behavior of wheelset is often neglected while carrying out railway vehicle dynamics analysis.
但是机车车辆动力学研究中，对轮对的纵向动力学特点的研究往往被忽略。
The curve negotiation performance of the 12-axle large wagons is analyzed with the SIMPACK vehicle dynamics analysis software.
利用SIMPACK车辆动力学分析软件分析了12轴大型货车的曲线通过性能，得出了车辆曲线通过速度和曲线外轨超高的较佳匹配结果。
The efficiency measures should be provided for carrying out integrated pest control in Moso forest by insect dynamics analysis.
通过害虫种群变动分析，可以为开展竹林病虫害综合防治提供有效的应对措施。
According to the structure of manipulator fixed on an excavator, dynamics analysis is run, and the dynamics equation is established.
对排雷机器人挖掘装置的操作臂系统进行了动力学分析，建立了其动力学方程；
The reason and solving measurements are discussed by means of dynamics analysis and calculation. And these measurements are feasible.
通过动力学分析与计算，找出了原因，提出了解决措施。
Dynamics analysis of 6 DOF parallel robot is the basis of deciding hydraulic pressure, actuator effective area, selecting servo valve.
六自由度并联机器人的动力学分析是确定液压源压力、作动器有效工作面积和选择伺服阀规格的基础。
WANG Fujun. Computational Fluid Dynamics Analysis-Theory and Application of CFD Software [m]. Beijing: Tsinghua University Press, 2005.
王福军。计算流体动力学分析—CFD软件原理与应用[M]。北京：清华大学出版社，2005。
The driving force of piston is ascertained with dynamics analysis, which lays a solid foundation in theory for designing of the whole of machine.
通过动力学的分析，确定了活塞的驱动力，为进一步设计整个机器提供了理论依据。
With the result of kinematics and dynamics analysis, some performances of the machine have been verified and some problems of it have been found.
从运动学和动力学分析的结果来验证炮弹在供输弹机构的驱动下的运动学及动力学性能，并发现了一些问题。
Modal analysis is mainly used to identify the vibrating characteristic of the framework, also it is the base for all other type of dynamics analysis.
模态分析主要用于确定结构的振动特性，是其他各类型动力学分析的基础。
With the background of Gatling gun′s cam curve slot and main roller system, dynamics analysis of high speed inverse cylinder cam mechanism was carried out.
以转管武器凸轮曲线槽主滚轮系统为背景，进行了高速反圆柱凸轮机构滚轮动力学分析。
Dynamics analysis was done by use of experimental data from the literature, which indicated that interface chemical reaction was the control of the process.
利用前人的实验数据，进行了水合物分解的动力学分析，认为温度在零度以上时，水合物分解反应由界面化学反应过程控制。
Its dynamic control mode of vehicle tyre is derived by dynamics analysis, and the linearization, controllability and observability of the system are analyzed.
通过动力学分析，建立了车型弹性倒立摆系统的动力学控制模型，并对系统进行了线性化和可控、可观性分析。
Crankshaft dynamics analysis and real test show that this method can identify the ignition moment, with the accuracy improved from cycle level to Angle level.
理论分析和试验表明该方法不仅可以准确识别着火始点，而且识别精度也从循环级提高到角度级。
Utilizing the dynamics analysis and finite element simulation, the acceleration sensor's mechanical structure with high overload protection capability was designed.
通过动力学分析和有限元模拟，设计出了具有高过载保护功能的加速度传感器结构。
A stress analysis of a diesel engine crankshaft is made by FEM based on dynamics analysis to determine the position of the initial crack and its propagation direction.
在内燃机动力分析的基础上，运用有限单元法，通过对曲轴应力分析，确定了裂纹启裂部位和扩展方向；
Based on the theory of workflow management system, the multi-degree-of-freedom dynamics analysis and management platform of gear transmission system has been established.
基于工作流管理系统的理论基础，建立了齿轮传动系统的多自由度动力学分析管理平台。
A longitudinal and lateral decoupled dynamics model was presented based on the dynamics analysis, as the longitudinal velocity, lateral velocity and yaw rate as the states.
在车辆动力学分析的基础上，建立了以纵向速度、横向速度、横摆角速度为状态变量的车辆纵横向耦合的动力学模型。
After that, many control algorithms are studied based on dynamics analysis and model foundation, then the intelligent fuzzy sliding mode controller is proposed and designed.
接着，在对并联机构进行动力学分析和建模的基础上，研究了多种控制算法，最终提出并设计了智能模糊滑模控制器。
After that, many control algorithms are studied based on dynamics analysis and model foundation, then the intelligent fuzzy sliding mode controller is proposed and designed.
接着，在对并联机构进行动力学分析和建模的基础上，研究了多种控制算法，最终提出并设计了智能模糊滑模控制器。
应用推荐