The dynamic stiffness method is exact for structural free vibration analysis.
在结构自由振动分析中,动力刚度法是一种精确算法。
This study develops a new method for solving beam dynamic response based on combining dynamic stiffness method with conventional finite element method.
基于动刚度方法与常规有限元方法提出了一种计算梁动力响应的新方法。
This paper presents a new method, the equivalent dynamic stiffness factor method, in dynamic balancing rotors.
用一种新的方法—等效动刚度系数法对转子的动平衡进行了研究。
In this paper, the dynamic stiffness matrix method is used to predict the vibration of the crankshaft system and to calculate the input exciting force from the crankshaft to the slide rod.
在曲轴系统的振动预测中应用动刚度矩阵法,计算从曲轴向滑块的激振力输入,建立了动力传动装置全系统的有限元模型,并采用该模型进行了振动的预测计算。
This paper calculates the residual vibration of rotors and axis with a new method equivalent dynamic stiffness factor.
提出用动刚度系数方法对转子和轴系残余振动进行预测。
The dynamic stiffness matrix method for determining dynamic characteristics of crankshaft is developed.
应用动态刚度矩阵法分析曲轴的动态特性。
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: dynamic stiffness of elastic supports for translatory motion - Direct method.
声学和振动。弹性件振动声学传输性能的实验室测量。第2部分:平移运动用弹性支架的动态劲度。直接法。
The calculation method of the unbalanced magnetic pull and its stiffness which are the key factors influencing the dynamic characteristics of generator rotors is proposed in this paper.
给出了作为影响电机轴系动力特性的主要因素之一的不平衡磁拉力及其刚度的计算方法。
Joint dynamic stiffness and damping were identified via solving the former identification model by use of least square method (LSM) or neural network method.
分别采用最小二乘法和神经网络方法对上述方程进行求解,推导出了关节动态刚度和阻尼的辨识模型。
In this thesis, 3-d coupling vibrations of internal combustion engine shafting are presented basing on dynamic stiffness matrix and precise time-integration method.
本论文以动态刚度矩阵和精细时程积分法为基础,分析了内燃机轴系的三维耦合振动形式。
Based on the current studies on large pile groups, an analytical method considering slip of piles and soil and dynamic adjustment of integral whole stiffness of pile groups was put forward.
在分析了大型群桩研究现状的基础上,提出了考虑桩土滑移和群桩桩顶整体刚度动态调整的分析计算方法。
The properties of suspended structure are introduced and the singular function method is used to derive the lateral displacement stiffness matrix and the dynamic equations.
介绍了悬挂结构特点,利用奇异函数方法建立了悬挂框剪结构的侧移刚度矩阵和动力方程。
The results show that the method can identify the stiffness parameters of frame structure accurately and has a good fault tolerance. The method has certain application value in structure dynamic test.
结果表明,该方法能较准确地识别结构的刚度参数,具有良好的容错性,在结构动力检测方面具有一定的应用价值。
The incremental variable plastic stiffness iteration method is employed to solve dynamic equations.
采用增量变塑性刚度迭代法,求解非线性动力方程。
In the respect of pseudo dynamic test, the author explained the influencing factors of initial inputting stiffness matrix and the equivalent method of mass matrix of model.
在拟动力试验方面,指出了联机试验中初始刚度矩阵的影响因素,建立了模型质量矩阵的等效方法。
The precision time step integration method (PIM) is used for the torsion vibration numerical simulation of diesel engine cracked shafting first, and the dynamic stiffness caused by crack is analyzed.
论文首次运用精细时程积分法(PIM)对柴油机裂纹轴系扭转振动进行时域数值模拟,并对裂纹所导致时变刚度的动态性质作了分析。
The general lumped parameter model introduced in this paper offers more accurate results than the traditional method for dynamic stiffness matrix of foundation is frequency-dependent.
由于基础动力阻抗矩阵是外荷载激励频率的函数,采用更多参数的一般集中参数模型与数值解答吻合精度更高。
In order to solve the problem of insufficient measured modes in the dynamic model updating, a direct model updating method using added known stiffness components is proposed.
为了解决模型修正中所需要模态数据不足的问题,提出了一种基于附加已知刚度的模型修正直接方法。
The dynamic stiffness matrix method is a powerful means of solving vibration problems in structural engineering, particularly when higher natural frequencies and better accuracies are required.
动态刚度阵法被广泛的应用于工程结构振动分析中,尤其是在需要获得更高阶频率和更高精度的振动问题时。
Dynamic Stiffness Matrix Method is applied to compute vibration of ship hull.
采用动态刚度阵法计算船体总振动的固有频率。
The voltage and current real-time feedback control method is adopted, which improves the stability, the stiffness, the static characteristics, and the dynamic characteristics of the system.
功率变换器主电路采用电压电流双闭环瞬时值反馈控制方式,电容电压和电流瞬时值控制环提高了系统的稳定性、硬特性、稳态特性及动态特性。
Dynamic differential equation is established with Kane method. The formulas of input torque at each joint and force acting on the ground and the approach to equivalent spring stiffness were presents.
并用凯恩法建立了系统动力学微分方程,推导了跳跃机构各关节输入扭矩和对地面作用力的计算公式,同时提出了确定等效弹簧参数的方法。
Dynamic differential equation is established with Kane method. The formulas of input torque at each joint and force acting on the ground and the approach to equivalent spring stiffness were presents.
并用凯恩法建立了系统动力学微分方程,推导了跳跃机构各关节输入扭矩和对地面作用力的计算公式,同时提出了确定等效弹簧参数的方法。
应用推荐