The mathematical modeling, dynamic simulation and its strength analysis of the new stirring kneader are the center contents of this paper.
新型搅拌捏合机的数学模型建立、动态模拟及其强度分析均是本文研究的主要内容。
The dynamic stability concept of large caliber machine gun is proposed, and its principle, theoretical modeling method and experimental analysis method are systemically studied.
提出了大口径机枪的动态稳定性概念，并对其原理、理论建模方法及模型、实验分析方法进行了系统研究。
Researches represented in this paper are the modal analysis and experimental modeling of the composite beam, and its static and dynamic stability.
本文研究了复合梁的模态分析结合实验建模方法，及其静力与动力稳定性问题。
System analysis and system design are divided into following processes: system requirement, requirement analysis, the system static modeling, the system dynamic modeling and physical modeling.
系统分析和设计划分为如下过程：系统需求，需求分析，系统静态建模，系统动态建模。
Using UML, use-case modeling, static modeling, dynamic modeling, coding and deployment analysis are made for the system, thus making ready for its particular development.
用UML对基于图文法的产品族配置系统进行用例建模、静态建模、动态建模以及编码与部署分析，从而为系统的具体开发做准备。
The main aspects of the device dynamic character study are the modeling and analysis of the kinematics and kinetics.
运动学和动力学建模和分析是研究机构动态特性的主要方面。
D assembly FE modeling and dynamic elastoplastic analysis are carried out for the obturator structure of a floating gun breech mechanism by using nonlinear finite element code MSC MARC.
利用大型非线性有限元MARC ，对某自动迫击炮浮动炮闩闭气结构，进行了三维装配体有限元建模和动态弹塑性分析，获得了关键闭气构件的应力、塑性应变和变形的动态响应。
To compare the results of static and dynamic test with initial finite element model calculations, error analysis of finite element modeling has been developed.
基于试验模型的静力试验和振动试验结果与初始有限元模型计算结果的比较，展开对面向健康诊断的悬索桥有限元建模的模型误差分析。
Especially with the successful application of Power Bond Graph modeling technique in the dynamic performance analysis of hydraulic system, the researches in this field have been advanced greatly.
特别是功率键合图建模技术在液压系统动态特性研究领域中的成功应用，为其提供了强有力的技术手段，大大推动了这方面研究工作的进展。
A novel modeling method, two-dimensional dynamic principal component analysis (2ddpca), was developed for monitoring batch process transition in author's previous work.
针对间歇过程过渡状态下具有的复杂过程特性，提出一种基于二维动态主成分分析(2ddpca)的故障诊断方法。
This paper obtains static wind loads based on numerical wind tunnel modeling, and presents the effective theoretic method of wind induced dynamic responses and equivalent wind load analysis.
本文通过数值风洞模拟方法得到了各风向下穹顶结构的平均风压，尤其是给出了有效分析风激动力响应和等效风荷载的理论方法。
The numerical modeling and analysis of static and dynamic strength and characteristics of the low floor city bus body structure are carried out in the paper, using a standard CAE software.
利用标准的CAE软件平台，对低地板城市客车车身结构进行数值建模和静动态特性分析。
The actual simulation and analysis, test results show that the simulation can be a true reflection of the power system dynamic and static performance, modeling is accurate.
经实际仿真和分析，试验结果表明该仿真能够真实反映电源系统的动、静态性能，模型设计是准确的。
Modeling of the heat affected zone in welding is a difficult problem in dynamic analysis, while the consistent of modal parameters is a major objective of modeling and model amendment.
焊接热影响区建模是动力学分析的一个难点问题，而模态参数的一致逼近是建模及修正的一个主要目标。
Afterwards, the modeling and the analysis in view of the dynamic threshold strategy are carried on.
随后，本文针对动态门限策略模型进行了建模与分析。
The paper described a method of converter modeling, tilting moment analysis and dynamic simulation.
本文介绍了转炉倾动力矩计算的计算机模型、计算方法及转炉倾动的动态模拟。
Firstly, the methods about modeling the multi-body system dynamic analysis and the principles on the hydraulic drive system are studied.
本文以某大型运输机为研究对象，首先，研究了多体系统动力学建模方法及液压传动原理。
According to the analysis, the abstract mathematical definition of the dynamic report model and the process of modeling were proposed.
通过分析给出了动态报表模板的抽象数学定义、流程建模的实现过程。
Modeling accurately the hydrostatic unit is the key of simulation of stepless steering performance of vehicle. The dynamic analysis of displacement control mechanism of variable pump affected by c…
本文通过试验和仿真两个方面，分析了排量控制阻尼孔对排量控制机构响应特性的影响。
Second subject of two-term sequence on modeling, analysis and control of dynamic systems.
本课程为连续两学期之课程。第二学期重点在于动态系统的模式化、分析、和控制。
Model the isolator with three-dimensional modeling software and establish the dynamic equation, finite element analysis to the model.
利用三维造型软件对隔振器进行建模，建立整星隔振动力学方程。
According to the extreme lunar terrain environment, the dynamic analysis is carried out on a lunar rover as a rigid multi-body system by using the rigid-body modeling method.
针对月球的复杂地形环境，利用多体系统动力学的理论，将月球探测车作为一个多刚体系统，对其进行动力学分析，建立了软地面环境下的月球探测车动力学模型。
According to the extreme lunar terrain environment, the dynamic analysis is carried out on a lunar rover as a rigid multi-body system by using the rigid-body modeling method.
针对月球的复杂地形环境，利用多体系统动力学的理论，将月球探测车作为一个多刚体系统，对其进行动力学分析，建立了软地面环境下的月球探测车动力学模型。
应用推荐