Easy to use software allows the user to graphically configure a custom signal processing flow using blocks such as biquad filters, dyna-mics processors, and surround sound processors.
借助方便易用的软件,用户可以利用双二阶滤波器、动态处理器和环绕声处理器等模块,以图形方式配置自定义信号处理流程。
This paper introduces a newly developed piezoelectric two component dyna- mic dynamometer.
本文介绍了一种新研制的压电双向动态切削测力仪。
In this paper, the improved free-interface coupling method is adopted for dyna - mic analysis of blade groups.
本文采用改进的自由界面模态综合法计算汽轮机叶片组的固有振动。
The dynamic fracture process of sea ice interacting with JZ20-2NW platform is performed on the basis of finite element software—LS-DYNA.
通过有限元软件LS-DYNA模拟了海冰与JZ20-2NW北高平台相互作用的动态断裂过程。
Objective to analyze and investigate distribution characteristics of pneumoconiosis among coal miners in China and its dyna mic trends from 1960 to 1996.
目的分析和探讨我国1960 ~ 1996年煤矿工尘肺发病的分布特点与动态变化趋势。
Simulated the typical ships broadside protection structure under the underwater contact explosion load by non-linear dynamical finite element software LS-DYNA.
采用非线性动力有限元软件LS-DYNA对典型舰船弦侧防护结构在水下接触爆炸载荷作用下进行数值仿真。
A finite element model describing the drawing process of the heat-shield panel of automobile engine is established by using the commercial dynamic explicit code LS-DYNA.
使用基于动态显式算法的商业软件LS - DYNA建立了某汽车发动机隔热罩拉延成形的有限元模型。
The feasibility to simulate the initial earth stress of the large underground structure by using the algorithm of dynamic relaxation and system damping in LS-DYNA is investigated.
主要研究使用LS-DYNA的动力松弛算法和系统阻尼算法相结合来求解大型地下结构初始地应力状态的可行性。
This paper describes a microcomputer controlled autocorrelator and datum acquisition processing system for the measurements of picosecond and femtosecond pulses and dyna-mic processes.
本文介绍一种用于皮秒和飞秒级超短脉冲和超快过程测量的微机控制光学自相关器和实验数据获取与处理系统。
The tube bending forming processes are simulated by explicit finite element code LS-DYNA.
采用显式有限元分析软件LS -DYNA ,对于圆形钢管的弯曲加工过程进行数值模拟。
The word "curtain" is widely used in graceful and restrained poems in Tang and Song Dyna-sty.
“帘”意象在唐宋婉约词中应用范围极其广泛。
Sheet metal digital incremental forming process is simulated with finite element software LS_ DYNA.
利用有限元软件LS_DYNA模拟金属板材单点渐进成形过程。
In this thesis, by using FEM software-LS-DYNA, we simulate the process of sheet metal Incremental Forming.
本文利用有限元分析软件LS - DYNA对金属板料渐进成形的过程进行了模拟。
The advanced DYNA - CHROME electroplating technology for automotive shock absorber rod was introduced in detail.
详细介绍了当今世界上最先进的汽车减振器杆硬铬电镀技术(DYNA- CHROME)。
The program could automatically call LS-DYNA solver, which greatly increased the efficiency of the trimming line optimization.
在程序中实现了LS - DYNA求解器的自动调用,大大提高了切边线的优化效率。
The finite element model of shallow spherical shell structures impacting a rigid plate is developed using the software LS-DYNA.
使用LS - DYNA软件建立了薄壁扁球壳结构撞击刚性板的有限元模型,并通过试验结果对模型的有效性进行了验证。
According to European side crash regulation, ECER95, the side crash property of a native car is analyzed by USA ETA/VPG and LS-DYNA softwares.
应用美国ETA/VPG及LS-DYNA软件,按照欧洲侧面碰撞法规ECER95,对国产某轿车汽车侧面碰撞车身抗撞性能进行了计算机仿真分析。
Using ANSYS / LS-DYNA software, based upon the test results, the axial crash behaviors of the aluminum foam-filled circular tubes are analyzed.
采用ANSYS/LS-DYNA软件对空圆管和泡沫铝填充圆管受轴向压缩时的吸能特性进行数值模拟研究。
The double sides pressurized hydroforming process of metal sheet is numerically simulated by applying the commercial FEM software ANSYS/LS-DYNA.
应用商用有限元软件ANSYS/LS-DYNA,对板料的双向加压液压胀形过程进行了数值模拟。
Furthermore, the temporal curves of the maximal depression displacement are obtained by ANSYS LS-DYNA. The simulation results agree with those of the tests.
其次采用ANSYSLS - DYNA进行了仿真模拟,给出了凹陷变形的时程曲线,获得了与现场实验较一致的结果。
The anti-blasting and absorbing energy mechanisms of composite protective structure under blasting loads were numerically simulated by applying ANSYS/LS-DYNA.
采用ANSYS/LS-DYNA软件对复合结构各层中的爆破能量的分布进行了系统的数值模拟研究;
DYNA software. The crash tests of different thickness, number, length steel panel and different section, number, length, thickness square column are simulated.
对不同厚度、不同数量、不同长度的受冲钢板,以及不同剖面尺寸、不同板厚、不同数量的方形梁进行了仿真分析研究。
The characteristic and principle of steel bar type energy absorber are introduced, and the wave form reappeared principle of the energy absorber is simulated by LS-DYNA.
介绍了自行设计的汽车模拟碰撞吸能器的特点及原理,利用LS - DYNA有限元分析软件对吸能器的波形复现原理进行了仿真分析。
Equal diameter axis formed in Multi-wedge cross wedge rolling(MCWR)was numerically simulated and analyzed utilizing the finite element method(FEM)software ANSYS/LS-DYNA.
利用有限元软件ANSYS/LS-DYNA,对楔横轧多楔成形等直径轴进行了数值模拟与分析。
The process of forming and changing of plastic elements is simulated by ANSYS/LS-DYNA solver, and also computes the distributing of element stresses and element strains.
用ANSYS/LS-DYNA求解器动态模拟出铆钉成形过程中塑性单元的变形过程,并计算出铆钉各个单元的应力、应变。
The model is implemented through a user defined material model in LS-DYNA. The model parameters are calibrated and validated by the data from related concrete penetration tests.
利用LS - DYNA程序的用户自定义材料模型开发并实现了模型算法,并用有关混凝土侵彻试验结果对模型参数进行了标定。
With hemispherical EFP simulation model, the penetration process of EFP that satisfies the simulation ratio are calculated using explicit finite element program LS-DYNA in this paper.
在此基础上以球缺型爆炸成型弹丸为计算模型,应用显式有限元程序LS-DYNA对满足模拟比的爆炸成型弹丸侵彻钢靶的过程进行了数值模拟。
Explosive lining process is numerically simulated by DYNA-2D finite element program, and the time history of stress distributions in the fluid mortar during explosive lining is analyzed.
应用dyna - 2d有限元程序,对爆炸衬砌过程中流态砂浆内的应力变化进行了数值模拟研究。
Explosive lining process is numerically simulated by DYNA-2D finite element program, and the time history of stress distributions in the fluid mortar during explosive lining is analyzed.
应用dyna - 2d有限元程序,对爆炸衬砌过程中流态砂浆内的应力变化进行了数值模拟研究。
应用推荐