At last, it takes steady trapping method based on frequency domain in to practice on DSP hardware platform.
最后，采用固定频率陷波法在DSP硬件平台上进行了实现。
Hardware platform design, this article mainly completes the portion design of DSP, completes the circuit principium chart of DSP and PCB figure.
硬件平台的设计，主要完成DSP部分的设计，完成DSP部分的电路原理图和PCB图。
This paper introduces the theory and design method of digital intermediate frequency receiver, and based on high speed DSP and FPGA establish hardware process platform.
介绍了一种数字中频接收机的原理与设计方法，并以高性能DSP、高速fpga为基础，搭建硬件处理平台。
The platform of blocking learning system using DSP technology and the design of the hardware module, software module and the building blocks experiment are also described.
该文介绍了自主模块化dsp技术的实验教学系统平台以及硬件模块、软件模块和积木式实验的设计。
The embedded hardware platform based on DSP has a high speed of process with high precision and reliability.
其中嵌入式DSP硬件平台具有处理速度快、精度高和可靠性强等特点。
And then a hardware platform of data realtime processing is designed for transmitting data to DSP target system with realtime data exchange (RTDX) technique.
初步探讨了利用实时数据交换(RTDX)技术，将数据传输到DSP目标系统进行实时处理的硬件实现平台。
Finally, the paper gives out a scheme of digitized carrier synchronization loop for software defined radio receiver which is based on the hardware platform composed of FPGA and DSP.
最后给出了一种用FPGA与DSP组成的硬件平台实现软件无线电接收机载波同步环路的方案。
The double-DSP platform can be used as an embedded system hardware platform to further enlarge new application fields such as optical networking, auto-control, biomedicine and so on.
DSP双机平台可作为嵌入式系统硬件平台，进一步开发各种应用软件，其应用可拓展到光学网络、汽车控制、生物测定学等新兴应用领域。
With regards to the hardware design, a DSP chip TMS320F206 is adopted as CPU, and builds a hardware platform of sample, control, communication and human interface.
硬件设计方面采用DSP芯片TMS320F206为核心处理器，建立起基本的采样、控制、通信和人机接口硬件平台。
This dissertation develops a DSP-based speaker recognition system, which can be divided into three parts: software processing platform, hardware processing platform and control panel.
本文开发了一个基于DSP的说话人识别系统平台，该平台主要由三个部分组成：软件处理平台、硬件处理平台和控制面板三部分组成。
This paper designs and realizes a low-bit video compression hardware platform based on DSP.
本文设计并实现了一个基于DSP的低比特率视频压缩硬件平台。
In this paper PDF417 barcode standard and codec are deeply researched, based on which decoding terminal's hardware platform whose core is DSP and software architecture are expounded in detail.
论文在深入研究了PDF417条码的标准和编解码算法的基础上，详细阐述了解码终端以dsp为核心的硬件平台和软件架构。
In this thesis, at the request of HF data link LINK-11 and the intercept system of HF 2g, 3g, a hardware platform based on TMS320VC6713 DSP is introduced, and its application is given.
本文依据短波link - 11数据链和短波2g、3g侦听系统的要求，主要设计实现了基于TMS320VC 6713DSP的硬件平台，并介绍了它的具体应用。
Finally, this paper discussed the software system design based on above hardware platform, including the DSP initialization program, the interrupt request service and speech coding.
最后讨论了基于上述硬件系统的软件设计，主要分为三个部分：dsp的初始化程序、中断服务程序和语音编解码程序。
The thesis is focused on the study of Electro-optical Navigation based on DSP, including the design of the hardware platform and algorithm software module for moving object detection and tracking.
本文主要研究了基于DSP的光电返航导引系统，包括系统硬件平台构建和目标检测与跟踪算法的软件实现。
An experimental platform of motor control is designed using the new DSP chip TMS320LF2407A specific for motor control by TI, which including software and hardware.
采用TI公司最新的面向电机控制的DSP芯片TMS320 LF 2407a，设计了一个通用的电机控制实验平台。本平台包括软硬件两部分。
Chapter 2 introduced the features of the hardware platform - OMAP1510's DSP subsystem and it's related integrated development environment - CCS and analyzed these features' impact on the video codec.
第二章对视频编解码器软件的硬件平台——OMAP1510的DSP子系统及其集成开发环境CCS的功能特点进行了介绍，并分析了硬件平台和开发环境对视频编解码器性能实现的影响。
In this system, first, a hardware platform based on DSP is constructed. then, the hardware and software of the system are tested by inputting the signal of the vibrating wire sensor.
在本系统设计中，基于DSP搭建了硬件系统，并以振弦式传感器的探测信号 为输入对象，对该系统的软硬件进行了测试。
The DSP, Digital Up Converter ( DUC ) and Digital Down Converter (DDC ) are key technology of a hardware-platform.
DSP和数字上变频和下变频技术是构建高频雷达通用硬件平台的关键技术。
A hardware development platform for the computer numerical control(CNC) system was built based on the ARM and the DSP.
针对柔性化制造的要求，构建了以ARM、DSP为基础的数控系统平台。
In the left paper, essential technology of software and hardware design scheme, systematic simulation is expounded, the DSP and FPGA is selected as the core of system hardware platform.
论文后半部分详述了该定位系统样机在实现过程中的软、硬件设计方案及系统级试验的关键技术。
In the left paper, essential technology of software and hardware design scheme, systematic simulation is expounded, the DSP and FPGA is selected as the core of system hardware platform.
论文后半部分详述了该定位系统样机在实现过程中的软、硬件设计方案及系统级试验的关键技术。
应用推荐