The simulation result shows that the DSP controller has very fast dynamic response and unity power factor, flexible control and simplified hardware design.
仿真结果表明，DSP控制器可以获得较高的功率因数，且具有快速的电路动态响应、灵活的控制方法以及简洁的硬件设计等特点。
This paper discusses the method that is applied in SPWM variable frequency system based on editable DSP controller.
阐述了一种以可编程DSP控制器为核心的应用于变频系统中正弦脉宽调制（SPWM）方法的实现。
And then it puts forward study on the high speed switch valve, using GMM as valve's core, adopting DSP as controller and designing bus communication interface.
在此基础上提出了以超磁致伸缩材料为阀芯，以DSP为控制器，带有总线型接口的高速开关阀的研究课题。
A type of open architecture robot controller based on DSP and CPLD is developed.
设计了一种新型的基于DSP和CPLD的开放式机器人控制器。
According to the structure character and transmission characteristic of superflexible coaxial cable, this paper presents a controller based on DSP of corrugator for superflexible coaxial cable.
根据超柔同轴电缆的结构特点和传输特性，设计并研制了生产超柔同轴电缆的基于DSP的轧纹机控制器。
Then taking DSP chip TMS320LF2407 embedded in CAN controller and CAN232 intelligent CAN adapter card as examples, it illustrates the engineering method of their communicating with CAN bus.
然后分别以内嵌CAN控制器的DSP芯片TMS320 LF 2407和CAN 232智能CAN接口卡为例说明了它们与CAN总线通信的工程实现方法。
This paper summarizes the basic structure and fundamental theory of Switched Reluctance generator system. The digital controller was designed based on DSP of TMS320LF2407A and CPLD.
介绍了开关磁阻发电机系统的基本结构和工作原理，设计了以TMS320 LF 2407a和CPLD为控制核心的数字控制器的硬件和软件。
The controller used in SVC based on DSP is mainly studied in this paper.
本文主要研究了基于数字信号处理器(dsp)的静止无功补偿装置(svc)的控制器。
The DMA controller can transmit data among the interior memorizer, exterior memorizer and chip peripheral without the CPU intervention. It has comprehensive application value in the DSP system.
DMA控制器可以无需CPU介入而在内部存储器、外部存储器和芯片外设之间传送数据，其在DSP系统中有广泛的应用价值。
On the basis of topology of cascaded multilevel convertor and its PWM technique, designed the controller of multilevel convertor at the core of DSP and CPLD.
根据单元级联多电平变换器拓扑结构及其脉宽调制技术的特点，以数字信号处理器和复杂可编程逻辑器件为核心，设计了多电平变换器的控制器。
Chaper4 describes the design of the hardware and software of the gripper controller based on DSP.
第四章介绍了基于DSP的手爪控制器的硬件和软件设计。
Finally, the traffic signal controller based DSP is designed, the hardware and software designs are presented.
最后，对基于DSP的交通信号控制器进行了软硬件设计。
The generator power parameter detection circuit, excitation controller and some related circuits based on DSP are designed.
包括基于DSP的发电机电力参数检测电路，励磁控制器以及一些系统相关电路。
This paper introduces a unified control system for universal power quality controller (UPQC) and its digital implementation based on DSP processor.
文章介绍了通用电能质量控制器的一种统一控制系统及其基于DSP的数字化实现。
According to modularization designs for open NC system, one kind of hardware design and analysis method is introduced, which bases on DSP and CPLD to develop the motion controller.
针对开放式数控系统体系模块化设计问题，介绍了一种基于DSP和CPLD的运动控制器的硬件设计和分析方法。
By using DSP, computation speed of the controller is increased and function of the controller is enriched.
DSP的使用提高了控制器的运算速度，丰富了控制器的功能。
The hardware design of the servo controller. We choose the TMS320LF2407 DSP made by TI to implement the AC Servo System.
给出了伺服控制器的硬件设计，选用美国TI公司专门为数字运动和电机控制推出的DSP控制器TMS320LF2407来实现交流伺服系统。
In hardware, we take TMS320LF2407A DSP as the controller, and the digital interface and the simulation connection based on its EVM board are expanded.
在硬件方面，以TMS320 LF 2407 ADSP为控制器，基于其EVM板分别扩展数字接口和模拟接口。
Finally, another set of controller based on TMS320LF2407A DSP is also discussed and designed to satisfy the development tendency of aero fuel pump system.
最后，文中还探讨和设计了一套基于TMS320 LF 2407 ADSP为控制核心的燃油泵用无刷直流电动机控制驱动器设计方案。
In response to the charge features of photovoltaic system, one type of charge controller is designed, which is based on DSP.
针对光伏电池—蓄电池能源系统充电的特点，设计了一种基于DSP的充电控制器。
Base on the inverter model, the parameter of these different control loop controller is designed and the digital control achieved through DSP TMS320LF2407A.
在分析逆变器模型的基础上设计了各控制器参数，并通过芯片TMS320 LF 2407 A实现了数字控制算法。
To satisfy the feed mechanism's real-time performance, the linear motor controller is designed based on Digital Signal Processor (DSP).
为满足进给机构控制系统实时性要求，设计了基于DSP的直线电动机控制器。
This paper presents a new method used to implement industrial real-time video controller with DSP and SAA7111AHZ.
本文介绍了一种使用DSP和视频处理芯片SAA7111AHZ实现工业用实时视频控制器的方法。
In this paper, a DSP-based power conditioner systems controller for fuel cell power plant is studied.
文章研究了基于DSP的燃料电池电站功率调节系统控制器。
This topic researches and develops the late-model microcomputer relay protection test device based on DSP core controller and embedded microcomputer.
本课题成功研究并开发了基于DSP核心控制器和嵌入式工控机的新型微机继电保护测试仪。
A hardware design project concerning fuzzy in temperature control system based on DSP was introduced, emphasizing the importance of the software method applied to the fuzzy-PID controller.
介绍了基于DSP的恒温模糊控制系统的硬件设计方案，着重介绍模糊pid控制器的软件实现方法。
A hardware design project concerning fuzzy in temperature control system based on DSP was introduced, emphasizing the importance of the software method applied to the fuzzy-PID controller.
介绍了基于DSP的恒温模糊控制系统的硬件设计方案，着重介绍模糊pid控制器的软件实现方法。
应用推荐