The integration technology of driving circuits and optical switch are also discussed.
同时讨论了控制和驱动电路与光开关芯片的系统集成方法。
The scan and addressing mode were discussed, and their driving circuits were designed.
经典的扫描方式，方便点击和解决所有问题。
The loading capacities of 3 kinds driving circuits were compared with each other by experiments.
对三种驱动电路进行了驱动能力和特性对比实验。
The choice of power semiconductor is introduced and the according driving circuits are designed.
本文对功率器件的选择进行了说明，并且设计了相应的驱动电路的参数。
Based on the embedded system of ARM, the design scheme of DC motor and stepper motors driving circuits is proposed.
基于ARM嵌入式控制器，提出了供纸系统中直流电动机和步进电动机驱动电路设计方案。
In order to meet the systems requirements operation, the improved way of motor structure and driving circuits are introduced.
为了满足系统的要求，达到高稳定同步运行的目的，文中介绍在电机结构、驱动线路等方面所采取的措施。
The principles, features and applications of this kind of driving circuits are presented, and the experimental waveforms are given.
分析了这类驱动电路的结构原理、特点及应用接线，并给出了试验波形。
Considering the characteristics of PLL, the dual self-excited driving circuits for capacitance micro-machined gyroscope are designed.
结合锁相环的特性，设计一种电容式微机械陀螺双环路自激驱动电路。
Based on MEMS dynamic testing system this paper designs a set of stroboscopic driving circuits to acquire clear image of high speed MEMS device.
本文基于机器微视觉的MEMS动态测试系统，设计了一套频闪驱动电路，用于采集高速运动的MEMS器件的清晰图像。
When it connects to ARM, driving circuits (sequential logical circuits) is necessary because CMOS star sensor doesn't belong to I2C bus circuits.
CMOS敏感器不是I2C总线电路，因此同arm连接必须有驱动电路(时序逻辑电路)。
For these shortcomings, the research on the design of driving circuits ASIC for capacitance micro-machined gyroscope is presented in the dissertation.
针对这些不足，本论文主要研究电容式微机械陀螺驱动电路ASIC设计。
The driving circuits adopt constant current chopping for the purpose of improving rotating torque and increasing working efficiency of the stepper motor.
驱动电路采用恒流斩波方式，提高了步进电机的运转扭矩和工作效率。
In the paper, the phase theory and amplitude theory of self-excited driving circuits for micro-gyroscope are analyzed based on mastering the work principles of micro-gyroscope.
在掌握微陀螺原理基础上，本论文对微陀螺自激驱动环路相位理论和幅度理论进行分析。
An assistant 380V AC-input and multi-output switching power supply is introduced which is used in thick-film driving circuits for large-power IGBT(Insulated Gate Bipolar Transistor).
介绍了一种用于大功率IGBT厚膜驱动电路的380V系统输入、多路输出辅助开关电源。
And the Intelligent Power Module (IPM) 7mbp75ra120's characteristic and self-protection function are studied as well, credible and steady driving circuits for IPM have been designed.
另外还研究智能功率模块7mbp75ra120的自保护功能和特点，设计了稳定、可靠的IPM驱动电路。
In chapter 5, the on-screen driving circuits composed of P-channel TFT have been designed, including inverter, shift register, transmission gate and simulated using simulation software.
第五章设计了全p沟道tft构成的屏上驱动电路，包括反相器、移位寄存器、传输门的设计，并用仿真软件进行了仿真验证。
This paper is intended to improve the regular structure of driving circuits by an analysis of factors that cause instant power drop of voltage in the multiple output of digital IC chips.
通过分析数字集成芯片多输出中电源电压瞬间下降的原因，对常规驱动电路结构进行改进。
This paper introduces a coding method of using LEDs to constitute digital display of Numbers. The related driving circuits and their interfaces with Micro-controllers are also introduced.
介绍用LED发光二极管组成数码显示的一种编码方法，并介绍了译码驱动电路及与单片机的接口。
The PWM chopper circuit and the selection of power switching elements, protecting circuits, driving units and software programming are given out.
主要内容包括PWM斩波电路结构及功率开关器件的选择，驱动电路，保护电路以及软件编程。
Special circuits and pertinent control algorithm realize the combination of quickly driving and precising positioning.
设计特殊电路和有针对性的控制算法，实现对压电陶瓷的快速驱动与高精度定位的结合。
This paper introduces the design of high power supersonic inverting power supply, including main circuit, controlling circuit, driving and protecting circuits, and gives experimental results.
主要介绍一种大功率超声波逆变电源装置的主电路、控制电路、驱动与保护电路的设计，并给出实验结果。
This paper introduces features & specifications of the HQD light source driving module and gives instruction of circuits concerned.
本文介绍了一种新器件——HQD光源驱动模块的特点、技术指标，并对有关电路作了说明。
Based on the driving circuit of IR2110, the circuits for producing negative bias voltage and increasing driving power are introduced.
在IR 2110驱动电路的基础上，介绍了产生负偏压和提高驱动功率的电路，并且针对电路中存在占空比的问题，设计了占空比调节电路。
A novel circuit with a narrow pulse driving structure is proposed for enhancing the noise immunity and improving the performance of wide fan-in dynamic circuits.
提出了一种利用窄脉冲发生器驱动输出级，以提高电路抗噪声能力，同时保持动态电路的高速特性的多输入动态逻辑电路。
A weighing sensor (5), the stepper motor driving the digital servo valve and the coder (10) on the digital valve (1) are respectively connected with the PLC (7) by signal circuits.
所述的称重传感器(5)、驱动数字伺服阀的步进电机以及数字阀(1)上的编码器(10)分别通过信号线路与所述的PLC(7)连接。
The principles and functions of two commonly used driving safeguard circuits on automobile starters are analysed and their shortcomings are pointed out.
分析了两种常见的汽车起动机的保护装置的电路原理及其功能，并指出了其存在的不足。
The method of direct control of hydraulic servo valve by means of PLC, the component parts of the control system and the driving interface circuits were described mainly in this paper.
文章主要介绍PLC对液压伺服阀的控制方法及控制系统的组成，说明驱动接口电路的连接。
The method of direct control of hydraulic servo valve by means of PLC, the component parts of the control system and the driving interface circuits were described mainly in this paper.
文章主要介绍PLC对液压伺服阀的控制方法及控制系统的组成，说明驱动接口电路的连接。
应用推荐