The geometric parameter change of optical fiber at different drawing speed is analyzed.
分析了在不同拉丝速度下，光纤几何参数的变化。
It was expected that drawing speed obviously influenced the sectional shape of products.
计算结果表明：牵引速率对密封条的挤出形状有很大的影响。
The effect of die design on coating concentricity of optical fiber at high drawing speed is investigated.
研究了在高速拉丝条件下涂覆模具的设计对光纤涂层同心度的影响。
With the increase of drawing speed, the position of solid-liquid zone move from inner to outer of the mould.
随连铸速度增大，液固界面位置从型内向型外移动。
The system has met the requirements of slab casting, improved continuous drawing speed and reduced the cost.
该系统满足了板坯铸钢要求，提高了连检率，降低了生产成本。
In the mechanical design, the application of CAD technology has accelerated the design and the drawing speed.
在机械设计中，CAD技术的应用加快了设计和绘图速度。
In a certain range. drawing force is reducing along with the increasing of drawing speed, which was reached by test.
通过试验得出拉拔力在一定范围内是随着拉拔速度的提高而降低的。
The major factors to affect curing degree of optical fiber coating at high drawing speed based on the existing drawing tower.
主要讲述了拉丝塔提高光纤拉丝速度过程中，影响光纤表面涂层固化度的几个因素。
The advanced technology and methods for improving drawing speed and productivity of continuous caster are discused in this paper.
就提高连铸机生产率的关键技术即提高连铸机拉速和作业率所采用的先进技术和措施进行了论述。
Adoption standard spare parts sketch element system aided drawing is one of the basic methods of increasing the drawing speed of computer.
采用标准零件图形元素库辅助绘图是提高计算机绘图速度的基本方法之一。
The effects of grey yarn pre-orientation degree, drawing temperature and drawing speed on the strength variable coefficient of polyester staple fiber are studied.
探讨了原丝预取向度、拉伸温度以及拉伸速度对涤纶短纤维强度变异系数的影响。
PDLLA/HA composite fibers were produced by melt spinning, and the choices of the process parameters such as temperature, revolving speed and drawing speed etc were discussed.
选用熔融纺丝法制备PDLLA／HA复合纤维，探索了熔融纺丝过程中温度、挤出机转速、拉伸速率、加料速度和冷却速率等一系列工艺参数的选择及其影响因素。
The law that drawing force changes with drawing speed is analyzed. It is raised that increasing wire drawing speed can improve labour productivity, save energy and reduce consumption.
分析拉拔力随拉拔速度的变化规律，指出提高钢丝拉拔速度可提高劳动生产率和节能降耗。
Based on research on mechanism of non die drawing deformation of thermal coupling casing, law of drawing speed variation was analyzed, and the mathematical model for non die drawn casing established.
通过对热电偶套管无模拉伸变形机制的研究，分析了拉伸速度的变化规律，并建立了无模拉伸套管的数学模型。
Effects of different configurations of the submerged nozzles, the pool height and flow rate (drawing speed) on the fluctuation of the flow level have been empathetically analyzed. The experimental...
重点分析了不同分配器结构尺寸、不同溶池高度以及流量(拉速)等参数对溶池内液面波动的影响，从而为双辊薄带连铸布流系统的设计提供了依据。
This paper addresses that speed fluctuation amount of drawing area, drawing speed, draw depth, draw Angle shall be used as the indexes to evaluate the performance of the inner sliding block mechanism.
提出用拉深区速度波动量、拉深速度、拉深深度、拉深角为评价压力机八杆内滑块机构性能优劣的指标。
This utility also lets you perform a simple drawing test and set the double-click speed and area.
这个工具还让您可以执行简单的画图测试，并设置双击的速度和范围。
During the working of paper cutting machine, both the speed of drawing paper and the revolving speed of cutter decide the length of paper.
在切纸机工作过程中，纸辊的拉纸速度和刀辊的旋转速度共同决定了切下纸张的长度。
The component distribution is more even when drawing extent is smaller and frequency is more rapid at the same casting speed.
拉坯速度相同时，拉幅越小，拉坯频率越快，成分越均匀，合金铜管的成分呈周期性分布。
But the drawing of the complicated section special shaped wire must consider processing rate and speed.
对复杂断面的异型材，在拉拔时要考虑道次加工率和拉拔速度。
The reasonable establishment and use of drawing base can not only save more time, but also save the disk space and enhance the system speed to the CAD system.
合理地建立和使用图形库，不仅可以节约大量的绘图时间，而且对CAD系统来说，也可以节约大量磁盘空间，提高系统速度。
With the summary of simplified and practical designing approaches to draw internal force figures in accordance with notations in internal forces, which simplified drawing process and improved speed.
总结了根据外力的符号直接绘制内力图的简单实用的绘制方法，这种画法简化了绘制过程，提高了绘图速度；
By using this method, automatic drawing is realized in designing different form turning tools which minimizes the hyperbolic error, increases the design speed and improves drawing quality.
此方法大大减小了工件加工时的双曲线误差，实现了各种成形车刀的自动绘图，提高了设计速度和绘图质量。
In the process of drawing, it realized automatism cartography, reduced subjectivity, heightened the speed and efficiency, and shortened mapping period.
在制图过程中，实现了土壤制图的自动化，减少了人为主观性，提高了制图的速度和效率，缩短了制图周期。
The sampling and dealing with of pressure, flow, power, speed, torque and the drawing of performance curve are realized basically.
基本实现了压力、流量、功率、转速、扭矩的自动采集与处理，性能曲线的绘制。
The tension fluctuation and irregularity of fiber decreases with the increase of drawing ratio, speed and temperature.
增大拉伸比、拉伸速度和拉伸温度能有效地减小张力波动和不匀率。
The test results showed that the influence of drawing ratio, speed and temperature on the tension, tension fluctuation and irregularity of the fiber were obvious.
结果表明，拉伸比、拉伸速度和拉伸温度对纤维张力、张力波动和不匀率均存在着明显的影响。
With the cooperative control of drawing temperature and feed speed, the final hole structure can be effectively controlled by tuning the applied pressure.
在温度和送料速度的协调控制下，通过调节气压参数可有效控制气孔结构。
For the process of the fiber taper drawing, the pre-heating time and stretching speed are carefully examined for parameter optimization.
在加热拉伸过程工艺方面，本文从预加热时间和拉伸速度两个角度进行研究，对参数进行优化处理。
For the process of the fiber taper drawing, the pre-heating time and stretching speed are carefully examined for parameter optimization.
在加热拉伸过程工艺方面，本文从预加热时间和拉伸速度两个角度进行研究，对参数进行优化处理。
应用推荐