The results of trial manufacturing and product detection indicate that employing a die forging-drawing process to form the monobloc break beam frame is feasible.
生产试制及产品检验表明，采用“模锻-拉制”工艺成形整体结构的新型制动梁架是可行的。
The invention expands the drawing process to the field of magnesium alloy tubes being difficult to treat and enables the large-scale industrial production to become possible.
本发明将拉拔工艺扩展至难以处理的镁合金管领域，并使大规模工业生产成为可能。
A plastic finite element model was established on the drawing process of copper tubes.
建立了铜管流动芯头拉拔过程的弹塑性有限元模型。
Mechanics characteristic for deep-drawing process of panel parts is analysed by upper-bound method.
用上限法分析了覆盖件在拉深过程中的力学特征。
The effect of drawing process on the structure and properties of high-strength PVA fiber was discussed.
探讨了拉伸工艺对高强PVA纤维结构和性能的影响。
This vehicle is in perspective, so we made some basic construction lines to aid in the drawing process.
战车是呈透视的，所以我们画一些基本结构线来辅助绘画。
The drawing process of tubular flux-cored wire is different from common steel pipe because of flux core.
由于药芯的存在，管状药芯焊丝的拉拔不同于普通的钢管拉拔。
Thus, the optimization design for the limiting drawing parameter of the cup-drawing process is very necessary.
因此，进行圆筒件极限拉深系数的优化设计十分必要。
To introduce the application of pickling free drawing process to semi finished high carbon steel wire production.
介绍无酸洗拉拔工艺在高碳钢丝半成品生产上的应用。
Aiming at the deficiency of rectangular tube drawing process, the forming process was optimized from two aspects.
针对矩形管拉拔成形中出现的不足，本文从两个方面对矩形管拉拔成形过程进行优化。
Mixed gridding technology is applied at gridding drawing process, and the gridding of small structure is minished.
在划分计算网格时，采用了混合网格生成技术，并对细小的结构进行了网格的局部细化。
This paper discusses the design and realization of self-tuning control system for an optical fiber drawing process.
本文讨论光导纤维拉丝过程自校正控制系统的设计与实现。
According to mechanical speed ratio and drawing process, the suitable speed signal transfer program is established.
根据机械速比、拉拔工艺确立合适的速度信号传递方案。
Shine and flat polyester staple fiber was produced by using profiled spinneret and special spinning and drawing process.
通过异形喷丝板的设计及特殊纺丝和后拉伸工艺生产了闪光扁平涤纶短纤维。
It is showed that the limit drawing height could be greatly improved as a variable BHF deep-drawing process was adapted.
结果表明，变压边力拉深工艺能够极大提高板料的极限拉深高度。
The deep drawing process of AZ31 magnesium alloy rectangular parts was researched by numerical simulation and experiments.
采用数值模拟和实验相结合的方法研究了AZ31镁合金板料分块压边力拉深矩形件的过程。
Finite element models based on different Lagrangian methods have been used to analyze the deep drawing process by the fe software, MARC.
采用有限元软件MARC基于不同拉格朗日法建立了一个有限元模型来分析深冲压成形过程。
This paper discusses the solid solution, surface treatment and drawing deformation and drawing process of GH90 alloy spring steel wires.
本文探讨了GH90合金弹簧钢丝的固溶处理、表面处理以及拉拔变形量和拉拔工艺。
Pulsating blank holder forces are used in deep-drawing process to increase the draw depth and improve the surface quality of drawn piece.
采用脉动变化的压边力控制拉深工艺，可提高成形极限及拉深件的表面质量。
The effects of T30S and Z30S chips, spinning process and drawing process on yarn irregularity of coarse denier PP filament were analyzed.
分析了T30S，Z30S两种切片及其纺丝拉伸等工艺对粗旦丙纶长丝不匀率的影响。
The real-time identification of material properties and friction coefficient is as the key to intelligent control of deep drawing process.
材料性能参数和摩擦系数的实时识别是实现拉深过程智能化控制的关键。
By analyzing the operation of stamping direction in the drawing process, the principle of determining the stamping direction was concluded.
分析冲压方向在拉延工艺中的作用，总结了冲压方向的确定原则，建立并编程实现冲压方向的优化模型。
Index of wire breakage caused by inclusions in wire drawing process is from 0.49 down to 0.19. Consequently, quality of product is improved.
钢丝拉拔过程中由夹杂物引起的断裂指数从0.49降到了0.19，明显改善了产品的质量。
The wire drawing with electro plastic effect is a new working process, in which pulse current is introduced into the common wire drawing process.
电塑性拔丝是指在普通拔丝工艺过程中引入高能脉冲电流对工件进行电刺激的新型加工方法。
The results show that the proportion of welded joint which broken in the drawing process was about 64. 1%, and about 35.9% in the roping process.
结果表明：焊接区在拉丝工序中引起的断裂占64.1%，在绞线工序中引起的断裂占35.9%。
The reform of partially Pt-substituted bushing furnace is an important measure to improve the quality of glass melt and the fiber drawing process.
对于不具备制球条件的玻纤企业，代铂炉型的改进是改善玻璃液质量，提高拉丝作业水平的重要措施。
The computer simulation of drawing process is described based on analysis of flowing characteristics of heterogeneous loose body in drawing process.
分析非均匀矿岩散体在放矿过程中的流动特点，提出非均匀矿岩散体计算机模拟放矿过程的思路。
Through the improvement in the traditional drawing process design, the structure of the drawing die was simplified and the drawing times were reduced.
通过对传统拉伸工艺设计的改进，简化了模具结构，减少了拉伸次数。
In this paper, the transmitting characteristic of multimode fiber is improved by introducing the periodic scramble during the fiber's drawing process.
介绍了通过在多模光纤中引入周期性的扰动以改善多模光纤的传输特性。
In this paper, the transmitting characteristic of multimode fiber is improved by introducing the periodic scramble during the fiber's drawing process.
介绍了通过在多模光纤中引入周期性的扰动以改善多模光纤的传输特性。
应用推荐