The stresses obtained by the standard displacement finite element method are discontinuous and are short of accuracy.
通常的位移有限元法得到的应力是不连续且欠准确的。
Based on interval analysis and displacement finite element method, the static displacement response analysis of structure comes down to solve the interval finite element control equation.
现有的理论和方法采用区间分析和位移法有限元理论对其进行分析，最终归为位移法区间有限元控制方程的求解。
The stress and deformation of crankshaft are calculated by finite element method with six load boundary conditions and three displacement boundary conditions.
分别采用六种载荷边界条件和三种位移边界条件对曲轴应力和变形进行了有限元分析；
Based on finite element simulating tests of frame columns, load-displacement of frame columns without tests are simulated, and the influencing factors of frame columns are synthetically analyzed.
在有限元模拟试验框架柱的基础上，还对未做试验的框架柱进行了骨架曲线的模拟，从而对影响框架柱的各因素进行了综合分析。
A numerical model calculating displacement of jointed slab on void foundation is established with finite element method.
用有限单元法建立了可考虑接缝和地基脱空的弹性地基板位移计算模型。
Based on energy functionals and with the inclusion of high order dynamic displacement modes, the finite dynamic element formulation for bar and beam is developed.
从能量泛函出发，通过引入高阶动态位移模式，导出了杆、梁、框架结构动态有限元列式，建立了杆梁动态有限单元。
Using the Finite Element Method (FEM) and dislocation theory, we simulated the asymmetric earthquake displacement field of a vertical strike-slip fault caused by laterally inhomogeneous medium.
结合位错理论和有限单元法，对介质横向不均匀性引起的直立走滑断裂地震水平位移场不对称性进行了数值模拟研究。
Shape function used for describing displacement distribution in element determines the speciality of the element in the finite element methods.
在有限单元法中，形函数用于描述单元内位移分布，决定着单元的特性。
By using multilevel substructure analysis and finite element displacement method, this system is suitable for various linear static analysis of aeronautical structures.
这一系统采用多级子结构分析技术，可以适应各种类型航空结构的线性静力分析。
The finite element method is used to calculate and analyze the stress and the displacement of host rock when the openings is under the jet grouting support.
采用有限单元法对巷道注浆支护时的围岩应力和位移进行了计算分析。
A new method to express the displacement field of isoparametric compatible element is presented in this paper, based on it a new method for formulation of incompatible finite elements is developed.
本文导出一种等参协调元位移函数的新的表示方法，在此基础上建立起了构造等参非协调元的新方法。
The stress and displacement distributions of the bellows under torsion loading are investigated by using both finite element method (FEM) and equivalent cylinder method.
本论文分别采用有限元法和等效圆筒法对波纹管在扭转载荷作用下的应力分布和位移变化情况进行了计算。
The finite element model and result are given. The influence on displacement of different finite element model "s lateral boundary and the cavities" radius are discussed.
给出了有限元模型和计算结果，讨论了有限元横向边界不同和孔径大小不同的情况下对位移的影响。
With the cubic B spline functions treated as displacement functions, a new method is introduced into. The result is compared with one of the finite element method.
应用样条有限点法，以三次B 样条函数为位移试函数，导出了拱结构非线性内力分析的新方法。
This article presents the whole process of calculating in finite-element displacement method by MATLAB, and draws bending moment diagram directly.
介绍用MATLAB实现有限元位移法结构计算的全过程，并直接绘出弯矩图。
The finite element analysis of truss system with interval parameters under interval load is studied and the structural interval displacement and stress response are deduced.
构建了区间参数杆系结构在区间荷载作用下的分析模型，导出了结构的区间位移和区间应力响应区间变量表达式。
Based on the assumption of random installation deviation, the finite element met hod analyzing the initial displacement and stress of grid structures was set up.
基于随机安装偏差模式，利用空间有限单元法和概率方法，分析了网架结构由于安装偏差引起的初始应力和初始位移。
By using ALGOR finite element analysis system, the stress field and displacement field of deep excavation were calculated.
采用ALGOR有限元分析系统，对基坑开挖引起的应力场、位移场进行了分析计算。
In this paper, the finite element model for calculating interference fit stress is formed by using displacement continuous condition and equal value of force condition on the fitting faces.
本文利用互相配合的弹性体配合表面上位移连续条件及力的等值条件建立了计算过盈应力的有限元模型。
Results the finite element model of NTMA tractor for CAD was set up, which could predict the strength and displacement of every node and element of its own structure in the course of deforming.
结果建立了用于计算机辅助设计的镍钛记忆合金牵引器有限元模型，可以预测一定形状的牵引器在变形过程中(各时段)其本身结构中各节点、单元的受力、位移情况。
Thus, predicting the settlement and displacement potential in subgrade filling by finite element method, the paper conducts treatment ahead of time.
所以在有限元对路基填筑可能引起的沉降和位移进行预测后，进行提前处理。
The relations between temperature, stress, strain and displacement on ductile shear zone are established by using theory of rheology and finite element method.
本文应用流变学有限元法，建立了韧性剪切带内的温度、应力、应变和位移之间的关系。
The coordinate transformation method to handle displacement continuation problem on the intersection line of curved surfaces in the curved shell finite element method is presented.
提出了在曲壳有限元法中用坐标转换法处理曲面交线处结点位移的连续性问题。
The rule of earth pressure varying with displacement presented in this paper is well comparable with the results of the finite element analysis.
用该方法描述的土压力随位移的变化规律与有限元法计算结果具有很好的可比性。
This paper presents a effective method dealing with step elastic supports in structural finite element analysis by inducing elastic support stiffness and structural displacement support matrices.
本文通过引入弹性约束刚度矩阵和结构位移约束列阵，提出了结构有限元分析中处理阶跃型弹性约束的一种有效方法。
In this paper, the distribution of stress and displacement of the special arc triangle components is solved by using the Angle division iteration method of finite element analysis.
采用角度细分逐次迭代的有限元分析方法解决了特殊圆弧三角形部件应力和位移分布问题。
An example was used to illustrate the necessity, rationality and validity of applying generalized displacement method to finite element analysis of thin-walled hydraulic structure.
通过一算例说明了水工薄壁结构有限元分析中采用广义位移法的必要性、合理性和正确性。
Make the three-dimensional finite element model about plate rubber expansion device. And then the models are applied serviceable load and displacement.
建立板式橡胶伸缩装置的三维有限元模型并施加符合实际工作状况的载荷与位移边界条件。
Then the key parts of the mill are analyzed for stress, displacement and rigidity by the finite element method.
采用有限元技术对轧机的重要零件进行分析，研究了应力分布、位移分布并计算出轧机刚度。
Studied in this paper is the nonconforming finite element approximation to the second order variational obstacle problem with displacement obstacle on the anisotropic meshess.
本文研究位移障碍下二阶变分不等式问题在各向异性网格上的非协调有限元逼近。
应用推荐