The concept behind Software RAID is simple — it allows you to combine two or more block devices (usually disk partitions) into a single RAID device.
软件RAID的概念很简单——使您可以将两个或多个块设备(通常是磁盘分区)组合为单个RAID设备。
Some of the more fault-tolerant RAID levels, such as RAID10 and RAID6, help provide an extra assurance that the storage subsystem can survive various disk failures.
一些容错性更好的RAID级别(比如RAID10和RAID6)帮助提供一层额外保障，确保存储器子系统能够经受各种磁盘故障。
Some RAID configurations can continue functioning even if a number of devices are disabled (failed), either deliberately or due to an error or disk problem.
有些RAID配置可以继续运行直到大量的设备被禁用(故障)，无论是故意或是因错误或磁盘问题。
The storage should be optimized with a proper RAID configuration, such as a RAID 5 setup with a hot spare disk.
该存储必须通过适当的RAID配置进行优化，比如一个附带热备份磁盘的 RAID5设置。
RAID-Z is not the only type of disk array available to ZFS. Mirrors are usually faster and less memory-consuming, but require equal Numbers of hard drives to use it.
RAID - Z不是唯一可用于ZFS的磁盘阵列类型，镜像速度通常更快且消耗的内存更少，但需要等量的硬盘驱动器才能使用它。
With RAID-1, a disk can fail, and information can still be acquired through the other copy.
对于RAID - 1，一个磁盘发生故障时，信息仍然可以通过其他副本获取。
If the database is inaccessible because the disk drive or RAID set is down, failover cannot occur.
如果因为磁盘驱动器或RAID故障而造成数据库不可访问，就不能进行故障转移。
Linear RAID is suitable when large data exceeding the individual size of any disk or partition must be used.
线性RAID适用于大型数据存储，任何单个大小的磁盘或分区都无法使用。
In this section, I'll walk you through the process of simulating a disk failure, and then bringing your RAID volume back out of degraded mode.
在这一节，我将带您体验模拟磁盘故障的整个过程，随后使您的RAID卷退出降级模式。
RAID-Z traverses the available metadata to read only the data that's relevant for the geometry and avoids reading the unused space on the disk.
RAID - Z遍历可用的元数据以便只读取有关几何学的数据并避免读取磁盘上未使用的空间。
Minimally, the host disk subsystem should have RAID capabilities to provide the required disk system speed.
主机磁盘子系统至少应该具有RAID功能，以提供所需的磁盘系统速度。
In fact, compared to hard disk notation, which takes into consideration a lot of parameters like disk type and number, partition type, etc, RAID devices are fairly simple.
事实上，硬盘注释考虑大量参数比如磁盘类型和数目，分区类型，等等，RAID设备相比较就非常简单。
There are, in general, two types of disk subsystems to consider: RAID and non-RAID.
一般要考虑两种类型的磁盘子系统：RAID和非raid。
Performance testing tools let you experiment with different system configurations, such as RAID array stripe size and hard disk file format, to see which combinations result in better performance.
性能测试工具允许您体验不同的系统配置，比如RAID阵列条带深度和硬盘文件格式，以便了解哪些结果能实现更好的性能。
More disk drives allow you to better tune the system. Alternatively, for a carefree set-up use a RAID system with as many drives as you can afford.
或者，使用一个带有尽可能多的磁盘驱动器的RAID系统，以便打消顾虑。
You will also need a fairly recent version of either GRUB or LILO if you plan to boot from an LVM or RAID disk.
如果您打算从LVM或RAID磁盘引导，也需要拥有比较新的GRUB 或LILO版本。
Software RAID allows you to dramatically increase Linux disk IO performance and reliability without buying expensive hardware RAID controllers or enclosures.
软件RAID使您不必购买昂贵的硬件 RAID控制器和附件就能极大地增强Linux磁盘的IO性能和可靠性。
It has 8 GB of RAM and three DS4000 disk subsystems configured as 14 RAID 0 arrays.
它有8GB的RAM，有三个DS4000磁盘子系统，配置为14个RAID0阵列。
The test environment used a System i Model 520 with two processors, 32 GB of memory, and 98 disk drives with RAID-5 protection.
这个测试环境??用一台SystemiModel 520，有两个处理器、32GB内存和 98 个磁盘驱动器（带 RAID-5保护）。
If you're putting together a compute farm or web cluster, RAID-0 is an excellent way to increase disk IO performance.
如果您正在设置computefarm或web集群，RAID - 0是一种提高磁盘io性能的极佳方法。
On Windows NT, the disk queue length is the best indicator of I/O saturation, and it should be less than the number of disks in the data RAID set minus one.
在WindowsNT 上，磁盘队列长度是I/O饱和程度的最好指示器，并且它应该小于数据RAID集中的磁盘数减去 1。
Because the Domino server can be very disk intensive, configuration of disk drives, and arrays of hard drives called RAID drives, can greatly enhance server performance.
由于Domino服务器有时需要占用大量磁盘，因此磁盘驱动器和RAID设备的配置可以极大地增强服务器性能。
Disk: High-performance SAS disk, RAID, SAN, or NAS direct connected disk subsystem.
硬盘：高性能SAS硬盘、RAID、SAN或者NAS直接联系的硬盘子系统。
Disk: High-performance SAS disk, RAID, SAN, or NAS direct-connected disk subsystem.
硬盘：高性能SAS硬盘、RAID、SAN或者NAS直接联系的硬盘子系统。
Disk: High-performance SAS disk (15k), RAID, SAN or NAS direct-connected disk subsystem.
硬盘：高性能SAS硬盘(15k)、RAID、SAN或者NAS直接联系的硬盘子系统。
RAID 0 works by breaking data into fragments and writing to all disk simultaneously.
RAID0工作原理是通过把数据分解成片段，并行写入所有磁盘。
There are several versions of RAID that can automatically restore data once you've replaced a broken hard disk.
有一经你已经代替一个坏掉的硬式磁盘能自动地修复数据的袭击的一些版本。
Operations on the CVS repository require a fast disk subsystem (RAID is highly advised).
CVS仓库操作需要快速磁盘子系统(RAID是好的选择)。
First you specify the actual block device with a "device" line, and then you immediately follow it with a "raid-disk" entry that specifies its position in the array, starting with zero.
首先您用一个“device ”行指定实际的块设备，接下来用一个“ raid -disk ”条目指定其在阵列中的位置，从零开始。
In this paper, some major problems, such as RAID architecture, disk array controller, which need to be solved on theory and engineering has been discussed in detail.
本文将对廉价磁盘冗余阵列体系结构、磁盘阵列控制器及实现过程中理论上和工程上需要解决的若干问题进行一些探讨和研究。
应用推荐