Check disk configuration and database placement (database).
检查磁盘配置和数据库位置(数据库)。
The article discussed best practices for disk configuration and VMM tuning in an NFS environment.
本文还介绍了在NFS环境中进行磁盘配置和VMM优化的最佳实践。
This section describes recommendations for system performance, including memory and paging, disk configuration, and connectors.
本小节提供调优系统性能的建议，包括内存和分页、磁盘配置以及连接器。
Disk configuration analysis means looking at the physical disk allocation, logical disk allocation, relationship to disk controllers, and so on.
磁盘配置分析需要检查物理磁盘分配、逻辑磁盘分配、与磁盘控制器的关系等等。
Use the WRKDSKSTS command to check the disk configuration and to verify that the disk utilization (% busy) is below the recommended threshold of 30%.
使用WRKDSKSTS命令检查磁盘配置，检查磁盘利用率（%忙）是否低于建议的 30%。
The disk configuration is a mix of IBM EXP arrays attached to a SCSI controller, and a FAStT 600 system connected to the server via two QLogic fiber cards.
磁盘配置采用了一个IBMEXP阵列，连接到一个SCSI控制器上；一个FAStT 600系统，通过两个QLogic 的光纤卡连接到服务器上。
The disk configuration is a mix of IBM EXP arrays attached to a SCSI controller and a FAStT 600 system, connected to the server via two QLogic fiber CARDS.
磁盘配置是混合的IBMexp阵列，附到一个SCSI控制器和一个FAStT 600系统上，通过两个QLogic光纤卡连接到服务器。
To reduce database contention independent of making disk configuration changes, try approaches that may reduce database access contention or improve file access time.
如果希望减少数据库争用，但是不愿意修改磁盘配置，那么应该尝试减少数据库访问争用或改进文件访问时间的措施。
The current VIOS and LPAR FC adapter, DS8300 disk, virtual adapter and virtual disk configuration is also captured and used in the planning for the new disk assignments.
当前的VIOS和LPARfc适配器、DS8300磁盘、虚拟适配器和虚拟磁盘配置均被捕获并用在计划中以便进行新磁盘的分配。
Lastly, it presents the code for writing the changed configuration file out to disk.
最后，本文介绍了将这个经过修改的配置文件写入到磁盘的代码。
We capture the current disk and volume group configuration with several LVM commands.
我们用几个LVM命令捕获当前的磁盘和卷组配置。
An LVM configuration makes it possible to combine disk space from several small disks into one big logical volume.
一个LVM配置使得将几个小磁盘的磁盘空间合并成一个大的逻辑磁盘成为可能。
Using the fastest hardware and storage management configuration possible, which involves factors such as disk and channel speed, write caching, and parallel writes.
尽可能使用最快的硬件和存储管理配置，这包括磁盘和通道速度、写缓存以及并行写等因素。
A configuration file defines nodes where processing and disk space is allocated for use in a parallel job.
配置文件定义平行作业中使用的已分配处理和磁盘空间所在的节点。
This includes the physical architecture, logical disk geometry, and logical volume and file system configuration.
这包括物理体系结构、逻辑磁盘排列，以及逻辑卷和文件系统配置。
This configuration will provide the most disk space for the server whenever there are hardware budget constraints.
这种配置下，就算有硬件预算的约束，也可以提供最多的磁盘空间。
The storage should be optimized with a proper RAID configuration, such as a RAID 5 setup with a hot spare disk.
该存储必须通过适当的RAID配置进行优化，比如一个附带热备份磁盘的 RAID5设置。
This prevents false disk errors in the SAN configuration from being reported to the file system manager.
这可以防止SAN配置中的虚假磁盘错误被误报给文件系统管理器。
The copied disk is used for system recovery; therefore, removing or reconfiguring network or device configuration information is not necessary.
复制的磁盘用于系统恢复；因此，不需要删除或重新配置网络或设备配置信息。
Configure the host adapter driver to be loaded through an initial RAM disk, which applies the configuration data for redundant disks when loading the adapter module at boot time.
配置主机适配器驱动程序，通过初始ram磁盘进行加载，初始ram磁盘将在引导过程中加载适配器模块时对冗余磁盘应用配置数据。
We are more proficient in analyzing the amount of the processor used and the amount of memory used, and we are now focusing more on the amount of disk I/O used (performance and configuration).
我们已经可以更加专业地分析处理器使用量和内存使用量，现在我们更多地关注磁盘I/O 使用量（性能和配置）。
The cluster repository disk is used as the central repository for all the cluster configuration data.
集群存储库磁盘用作所有集群配置数据的中央存储库。
After you create the empty logical disk and configure the virtual machine profile, the file system configuration inside the virtual machine needs to be updated.
创建空逻辑磁盘并配置虚拟机概要之后，需要更新虚拟机内部的文件系统配置。
There are many other areas of investigation, for example, hardware, disk I/O, configuration, topology, tuning parameters, OS, and patches, among others.
还需要调查其他很多方面，比如硬件、磁盘I/O、配置、拓扑、调优参数、OS和补丁等。
When all updates are complete, return the default PXE boot configuration to boot from local disk to avoid any accidents if a computer were to make a PXE request.
更新完成后，把默认PXE启动配置改为从本地磁盘启动，防止计算机再次发出PXE请求时发生意外。
The limiting resource in the configuration was the disk resources, which you will see in the data described later in this article.
磁盘资源是该配置的限制，您将在本文随后提供的数据看到。
A final word of advice when trying out LILO for the first time: I found it a lot safer to work out my LILO configuration using a floppy boot disk rather than my hard disk.
关于第一次尝试LILO的最后一点建议是：我发现使用软盘引导磁盘比使用硬盘实现LILO配置更为安全。
Return the configuration back to the local disk PXE configuration.
把配置恢复到本地磁盘PXE 配置。
Not using disk replication for install and configuration data
不要将磁盘复制用于安装和配置数据
Not using disk replication for install and configuration data
不要将磁盘复制用于安装和配置数据
应用推荐