Download the latest BIOS update DOS image, and follow the instructions to create a floppy disk boot image.
请下载最新的BIOS更新dos镜像，并按说明创建软盘启动镜像。
Download the Broadcom firmware (see Resources), and follow the instructions to create a floppy disk boot image.
下载Broadcom固件(请参阅参考资料)，并按说明创建软盘启动镜像。
Download the latest BMC firmware update DOS image and follow the instructions to create a floppy disk boot image.
下载最新的BMC固件更新dos镜像，按照说明创建软盘启动镜像。
You simply upgrade one disk then boot off it, and when you need to go back to the other version, simply boot off that disk instead.
只需升级一个磁盘，然后从它引导；当需要返回到另一个版本时，只需从另一个磁盘引导。
Just as before, if I need to reboot the LPAR at this point, I can rest assured that I can boot from either disk.
与以前一样，如果我需要在此刻重新引导这个LPAR，我将有把握能够从任一磁盘引导。
If it doesn't, you'll need to use the MBR for at least the system boot disk or convert to GPT after installing to the MBR (a potentially risky or tedious proposition).
否则，您需要至少对系统引导盘使用MBR或者在安装到MBR之后转换到GPT(这是一种有潜在风险或单调乏味的建议)。
The server will need to be rebooted after the update process, so make sure the bootlist is showing the target alternate disk as the first boot device (as seen in Listing 7).
服务器需要在更新过程完成后重新启动，所以要保证启动列表显示目标备用磁盘作为启动设备（如清单 7 所示）。
If you're trying to determine why a server won't boot after a disk failure, the first thing I often do is to un-map or disconnect all disks from the server except for the root volume group.
如果想要判断一个服务器为何在磁盘故障后不能引导，我通常会做的第一件事情是从服务器(根卷组除外)，断开所有磁盘的映射和连接。
These tools allow you to boot your system with a special disk and dynamically resize your partitions and filesystems.
这些工具可以让您用一个特殊磁盘来引导系统，并可以动态地重新调整分区和文件系统的大小。
To ensure that the boot disk and boot list had been configured correctly, I would reboot the system to verify.
为了确保引导磁盘和引导列表已被正确配置，我将重新引导系统以便验证。
The same is technically true of GPT; however, if a GPT disk includes a BIOS boot partition, GRUB 2 will store extra code in that partition.
从技术上讲，GPT也是一样；尽管如此，如果一个GPT磁盘包含BIOS启动分区，GRUB2将在该分区存放额外的代码。
When AIX partition boots, the firmware may not recognize the boot disk.
在引导AIX分区时，固件可能无法识别引导磁盘。
NWSSTG sets the boot source on a virtual disk defined in the NWSD.
NWSSTG将引导源设置在NWSD中定义的一个虚拟磁盘上。
This can typically be seen as a BIOS option to boot from these types of disk.
这通常可以看作从这些类型的磁盘引导的一个BIOS选项。
EFI includes its own boot loader, so you can boot from a GPT disk on an EFI-based system.
EFI包含自己的引导装载程序，因此您可以在一个基于EFI的系统上从一个GPT磁盘引导。
To ensure that the boot disk has migrated successfully we must make sure that we can boot the system on the new disk.
为了确保引导磁盘已成功迁移，我们必须能够在这个新的磁盘上引导此系统。
If I needed to restart the system at this point in the migration, I could be assured that I could boot from either disk.
如果在迁移的这个时候需要重启系统，我就能有把握能从任一磁盘引导。
After downloading one of these disk images, you'll have a disk image that's ready to boot.
下载某个磁盘映像之后，您将拥有可以开始引导的磁盘映像。
You can use this command to tell the system to boot from CD, disk, the network, or other devices.
可以使用这个命令让系统从CD、磁盘、网络或其他设备引导。
With the boot disk defined, you can now boot this disk, which results in starting the UNIX V6 image.
定义引导磁盘后，您现在可以引导此磁盘，这会导致启动UNIXV 6图像。
Try using a boot disk to restart the computer to see if you can access to hard drive.
试着用启动盘来启动计算机，看是否能访问硬盘驱动器。
In addition to populating the virtual disk with the CD-ROM ISO image, you must boot the image when it's done.
除了使用CD - ROMIS o映像来填充虚拟磁盘之外，还必须在结束时启动这个映像。
A final word of advice when trying out LILO for the first time: I found it a lot safer to work out my LILO configuration using a floppy boot disk rather than my hard disk.
关于第一次尝试LILO的最后一点建议是：我发现使用软盘引导磁盘比使用硬盘实现LILO配置更为安全。
When all updates are complete, return the default PXE boot configuration to boot from local disk to avoid any accidents if a computer were to make a PXE request.
更新完成后，把默认PXE启动配置改为从本地磁盘启动，防止计算机再次发出PXE请求时发生意外。
You may normally boot from a hard drive, but you may sometimes need to boot from a floppy disk, a USB memory key, a CD or DVD, or a network.
您可能通常从硬盘驱动器引导，但有时可能需要从软盘、usb内存密匙、CD或DVD，或者网络引导。
One of my favorite show-off tricks is to do a complete bare-metal system rebuild, using only a Tom's Root Boot disk and an Internet connection.
我最喜欢表演的戏法是只用一张Tom的Rootboot盘和网络连接完成裸机系统的重建。
Select yes only if you suspect a problem with the boot disk, because it takes a long time to check the media surface, and most of the time this is unnecessary.
除非您怀疑引导盘有问题，否则不要选yes，因为检查介质表面要花很长的时间，而且大多数情况下这是不必要的。
This has a very serious implication: namely, that in order to boot the disk directly, your BIOS must support disks connected via FireWire or USB.
这会涉及严重的问题：即为了直接引导磁盘，您的BIOS必须支持通过FireWire或usb连接的磁盘。
I had two choices here; I could either rebuild the VIOS and the LPARs from a mksysb restore or attempt to boot them from disk.
这里有两个选择；可以通过mksysb恢复重新构建VIOS和LPAR，也可以从磁盘引导它们。
That way, if I messed up any of the configuration in my lilo.conf file, I could take out the boot disk and boot into Linux as before.
那样，如果弄乱了lilo.conf文件中的任何配置，都可以取出引导磁盘并像先前一样引导到Linux。
应用推荐