If the working-frequency discharging voltage value exceed normal range, can faintly adjust the discharge gap.
如果工频放电电压值超出范围，可对间隙进行微调。
When discharge is full of discharge gap, each equivalent discharge parameter is around definite numerical value.
当放电充满整个间隙时，各等效放电参量在相同激励频率下基本保持在一定值附近。
The discharge gap voltage is represented in terms of Fourier transform , the equivalent impedance of DBD discharge gap is available.
对放电间隙电压进行了傅立叶分解，并由此求出了放电间隙的等效阻抗。
In order to obtain the 3D data of the discharge gap and workpiece shape from the experimental results, a new measurement is proposed.
在试验结果的获取中，为能够得到很难测量的线电极周围的放电间隙和工件形状数据，提出一种新的三维形状测量方法。
The dimensional accuracy of electrical discharge machining(EDM) is greatly influenced by the overcut resulting from the discharge gap and electrode wear.
电火花加工工件的尺寸精度受过切量影响，而过切量的大小主要取决于放电间隙和电机损耗。
Low applied voltage, low conductivity of solution and small discharge gap are favorable for the production of hydrogen peroxide per unit electric energy.
低电压、低电导率以及小的电机间距有利于提高单位电量过氧化氢的产率。
The uniformity of discharge gap is a very important technical parameter in lowering various interference factors and ensuring stable EDM process and quality.
在电火花加工中要降低各种干扰因素的影响，确保加工质量和稳定的加工过程，放电间隙的一致性是非常重要的一个技术指标。
In this paper, some new points were put forward based on theoretical analysis of the discharge gap of Electric discharge Generating machining based on wire electrode.
针对基于线电极展成加工的放电间隙进行了理论分析，提出了一些新的研究观点。
The system's main functions are: testing the defects of the transparent electrode and recording the position of defects, measuring the widths of the transparent electrode and the discharge gap.
系统的主要功能为：透明电极的缺陷测量与定位和透明电极宽度与间隙测量。
The installation of a Watts air gap with the drain line terminating above a floor drain will handle any normal discharge or nuisance spitting through the relief valve.
连接通向地漏的排泄管的美国瓦茨气隙的安装将有助于处理通过安全阀排出的任何正常排放或有害的泄漏。
The discharge should be funneled through a Watts air gap fitting piped to a floor drain.
这种排放应该通过美国瓦茨气隙连接件用管道引到地漏处。
Normal discharge and nuisance spitting are accommodated by the use of a Watts air gap fitting and a fabricated indirect waste line.
采用美国瓦茨气隙连接件和预制导向水管线，可能会伴随正常的排放和有害的喷溅。
Measurements of stray field within the plasma region and magnetizing curve of the iron core were made in a model device with variation of air gap size and under load and unload discharge conditions.
模拟实验给出了不同气隙情况下，空载和负载放电时，等离子体区的杂散场和铁芯磁化曲线测试结果。
In this paper the effect of current slop on the distribution of discharge energy in the gap of WEDM is researched for the first time in theory, and some rules are found.
本课题首次从理论与实践上探讨了线切割加工中，电流上升沿斜率对加工能量分配的机理，发现了电流波形影响线切割加工性能的规律。
If this extra capacitor is biased, then the added energy will discharge into the spark gap.
如果这额外的电容器是偏颇的，那么说，能源将排放入。
The discharge at the top of icicle is one of the main factors influencing flashover voltage when the air gap amid the sheds of ice-covered insulators is not bridged.
覆冰绝缘子伞裙间隙未桥接时，冰凌尖端的放电是影响绝缘子闪络电压的主要因素之一。
According to the theory of robustness, this paper takes a robustness processing in air gap discharge test data when the up-down method is employed.
通过引入稳健性理论，对升降法空气间隙放电试验数据进行了稳健性处理。
The discharge should be funneled through a watts air gap fitting piped to a floor drain.
排放应该成漏斗状通过美国瓦茨气隙连接件管道引到地漏上。
There is an obvious gap with the developed countries in term of key indexes such as comprehensive energy consumption, pollutant discharge, and resource recovery and recycling rate.
综合能耗、污染物排放、资源回收利用率等关键指标与发达国家差距明显。
The influence of laser sampling, auxiliary spark discharge voltage, and electrode point gap on analytical results was examined.
考察了激光取样、辅助火花放电电压、电极尖端距离等条件变化时对分析结果的影响。
Under DC voltage the restraint and time lag phenomena of partial discharge (PD) in cavities or oil gap by X ray irradiation were investigated.
直流电压下X射线对气隙、油隙放电的激发过程存在明显的“滞后”现象，即：正极性电压下X射线照射首先抑制放电的发生；
The installation of a Watts air gap with the drain line terminating above a floor drain will handle any normal discharge or nuisance spitting through the relief valve.
安装带着排放管道的美国瓦茨气隙，其排放管道的终端位于地漏的上方，用于处理通过安全阀的任何正常排放或有害喷溅。
The recognition circuit for EDM gap state is researched, selecting proper rate between nomal discharge, arc and blank, defining suitable servo feed.
研究了电火花放电间隙状态判别电路，选择恰当的正常火花放电、电弧放电及空载比例，确定较佳伺服进给量。
Using a new electrostatic discharge (ESD) simulation and testing set-up, we investigated the characteristics of air ESD at a fixed gap distance.
为更好地研究空气式静电放电，利用新型ESD模拟测试系统研究了固定间隙的空气式静电放电特性。
Furthermore, with the increase of air gap spacing, the transition from the homogeneous to filamentary discharge is related to the fluctuation of discharge current.
随着空气间隙距离的增加，均匀放电向丝状放电的转化与电流脉冲波动相关。
The relation between relative light crosstalk and driving voltage, gap of discharge electrode, width of electrode, as well as the effect to restrain crosstalk with barrier ribs are also discussed.
着重讨论了相对光串扰与驱动电压、放电电极间距、电极宽度之间的关系。
The pulse discharge phenomena of gas-liquid mixture in wire-wire gap are studied.
研究了气液混合两相体中线线电极脉冲放电现象。
The pulse discharge phenomena of gas-liquid mixture in wire-wire gap are studied.
研究了气液混合两相体中线线电极脉冲放电现象。
应用推荐