The researchers analysed the sizes and structures of ash particles using a variety of techniques, such as atomic force microscopy, scanning electron microscopy and X-ray diffraction.
研究人员使用不同的技术研究了火山灰颗粒的尺寸和结构，例如原子力显微镜、电子扫描显微镜和X射线衍射。
Electron diffraction results show that these films are amorphous.
电子衍射结果表明薄膜是非晶态的。
The program includes use of X-ray diffraction, electron microscopy, and other techniques for testing materials on the molecular level.
其中还涉及X射线衍射、电子显微镜及其他仪器的使用，以检测材料的分子结构。
The resultant surfaces were characterized by means of SEM, transmission electron microscopy (TEM), X-ray diffraction (XRD), and water contact Angle measurements.
用扫描电镜、透射电镜、X射线衍射、接触角测量等技术对表面进行了表征。
The changes of transmission electron diffraction patterns indicate the phase change has occurred at about 220k, and its crystal parameters change obviously.
透射电子衍射花样的变化表明在220k附近发生了相变，它的晶体结构参数明显地变化。
X-ray diffraction and transmission electron microscope experiments indicate the powder sample is amorphous and also show the average particle size and crystallization products.
射线衍射和透射电子显微镜实验不但证实它的非晶性，而且给出它的平均颗粒度大小和晶化产物。
The morphology and crystal structure of solvent induced crystalline PET were studied by X-ray diffraction and scanning electron microscope.
应用X射线衍射和扫描电子显微镜研究了溶剂诱导结晶PET的形态和结晶结构。
The structure of Li Ca complex grease was studied through IR spectroscopy, X ray diffraction, DTA and electron microscope.
利用红外、X射线衍射、差热和电子显微镜等手段研究了复合锂钙基脂的结构。
Using the TEM to observe the micro shape of coiled carbon whiskers, and analyze their structure by electron diffraction, it can be informed that its structure is hexagonal crystal.
用透射电镜(TEM)观察螺旋形碳晶须的微观形貌，并作选区电子衍射，分析其结构，可知螺旋形碳晶须的结构为六方晶体。
Straight carbon nanotubes with multishells produced by arc discharge and pyrolysis of organic gases using metal particles as catalysts have been investigated by means of electron diffraction.
本文对电孤放电和催化剂热解碳氢气法制备的多层直形纳米碳管的倒空间及其螺旋度，采用电子衍射进行了研究。
The growth process of the films was in situ monitored by reflective high energy electron diffraction (RHEED).
通过反射高能电子衍射(RHEED)仪原位实时监测薄膜生长，研究薄膜的生长过程。
The residual strain fields at composites interface were studied with two convergent beam electron diffraction (CBED) techniques.
用两种会聚束电子衍射(CBED)技术研究了复合材料界面残余应变场。
The inheritance phenomenon of precipitated V_4C_3 in martensitic transformation has been investigated by means of electron diffraction and matrix analysis.
本文利用电子衍射和矩阵分析方法探讨了析出V_4C_3在马氏体相变中的遗传现象。
The sample's crystal phase, structure, morphology and the reaction process were characterized and analyzed by using X-ray diffraction(XRD), transmission electron microscopy(TEM).
采用X射线衍射（XRD）、透射电子显微镜（TEM）分析手段对样品的物相、结构、形貌进行了表征和分析。
This paper describes two microcomputer programs of electron diffraction spot patterns.
本文介绍了两种电子衍射花样的微型机分析程序。
By electron diffraction analysis, it is identified that the alloy phase has a face center orthogonal structure and there are some orientation relationship between the Mg ma.
通过电子衍射分析确定出该合金相具有面心正交结构，与镁基体间存在着一定的取向关系。
The selected area electron diffraction (SAED) pattern of the twin was indexed by transforming matrix of hexagon crystal twin plan.
并采用六方晶系孪晶面的变换矩阵对孪晶电子衍射花样进行了标定。
Ultrafast electron diffraction is an important technique to study the ultrafast phenomenon in physical, chemical and biological processes.
超快电子衍射系统是认识超快物理、化学及生物过程的重要工具之一。
The distributions of composition, phase-and microstructure were examined respectively by using electron probe microanalysis (EPMA), X-ray Diffraction (XRD) and scanning electron microscopy (SEM).
分别用电子探针（EPMA）、X衍射（XRD）和扫描电镜（SEM）查证了其组分、相结构和显微结构的梯度分布。
They were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM).
产物经x -射线粉末衍射(XRD)、透射电子显微镜(TEM)和高分辨电子显微镜(HRTEM)表征。
In this paper a computer program was described, which is designed for analysis of polycrystalline electron diffraction pattern of a multi-phase system.
本文介绍为分析多相体系的多晶电子衍射图而设计编写的计算机程序。
X ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), and photoluminescence (PL) are used to analyze the synthesized GaN nanorods.
用X射线衍射（XRD）、扫描电镜（SEM）、高分辨率透射电镜（HRTEM）和光致发光光谱（PL）对生成的产物进行了分析。
The state of electron is described by wave function. Intensity distribution of single slit electron diffraction is derived by probability distribution of electron momentum.
电子状态用波函数描述，由电子动量的概率分布，得到电子单缝衍射的强度分布。
The prepared product has been characterized by means of X-ray diffraction (XRD) and scanning electron micrography (SEM).
通过X射线粉末衍射（XRD）和扫描电子显微镜（SEM）对产物进行了表征。
X-ray powder diffraction(XRD), scanning electron microscopy(SEM), transmission electron microscopy(TEM) and photoluminescence spectra were used to characterize the resulted BAM phosphor.
通过X射线粉末衍射（XRD）、扫描电镜（SEM）、透射电镜（TEM）以及荧光光谱对获得的试样进行了表征。
The polymer structure was investigated by using FTIR, X-ray diffraction, electron diffraction and contact Angle measurements.
通过热失重，红外光谱、X -射线衍射、电子衍射和接触角测定等，研究聚合物结构与性能。
The high-resolution images and corresponding electron diffraction patterns of YBCO films were obtained with the aid of high-resolution transmission electron microscope(HRTEM).
在高分辨透射电子显微镜（HRTEM）下获得了薄膜的高分辨图像及电子衍射花样。
The microstructure of multilayers was characterized by high-resolution transmission electron microscopy, X-ray diffraction, scanning electron microscope and energy dispersive spectrometer.
利用透射电子显微镜、X射线衍射仪、扫描电子显微镜和X射线能量色散谱仪分析了多层膜的微结构。
A new kind of method for studying critical materials-electron backscatter diffraction (EBSD) analysis technology was introduced.
介绍了一种新型的晶体材料研究方法——电子背散射衍射分析技术。
The resolution index of electron diffraction in TEM is analyzed. The exactly experimental method is given for demarcating electron diffraction camera length by Gold-monocrystal in TEM.
同时对TEM中的电子衍射分辨率指数进行了分析和讨论，并给出了实际应用金单晶标样精确标定TEM电子衍射相机长度的实验方法。
应用推荐