So, the difference circuit consisted of this transistor has merit of sma…
因此由这种新型磁敏三极管构成的差分电路还具有温漂小的优点。
The circuit of Photoelectricity Weak Signal Detection, preamplifier circuit, difference circuit, modulation circuit, optical source thermal control and current drive circuit etc. are designed.
设计实现了基于差分后谐波检测的微弱信号处理电路、前置放大电路、差分电路、调制电路和光源温度控制电路及电流驱动电路等。
A circuit that decreases the difference between the strongest and the weakest signals in a particular range.
减小某特定范围内强弱信号之间差别的一种电路。
If there is an ac potential difference between the shield and the measuring instrument, there may be capacitive currents flowing through the measuring circuit that will add interference.
如果屏蔽和测量仪器之间存在一个交流电势差，则可能有电容性电流通过测量电路，增大干扰。
As the droplets jump, they carry charge from one plate to the other; if the two plates are connected through an external circuit, that charge difference can be harnessed to provide power.
当水滴下落时，他们携带电荷从一个极板到另一个极板，如果两块极板通过外回路连接，它们之间的电荷差就能用于提供能量。
Cancer cells exude different compounds than healthy cells do, Haick explains, and the circuit picks up this difference.
海克解释说，癌细胞所散发出的化合物跟健康细胞不同，该电路发现了这种不同。
Because of the difference of arc circuit, the welding process of twin-wire indirect arc gas shielded welding is more stable than single wire welding.
由于电弧回路结构不同，双丝间接电弧气体保护焊的焊接过程比单丝焊更加稳定。
The core circuit is two stages of direct-coupled difference amplifier.
核心电路为两级直接耦合差分放大器。
Based on the output-voltage error function, a novel time-discrete modulation technique is proposed for matrix converters (MCs) and time-discrete difference equations of a MC circuit are derived.
针对矩阵变换器调制方式的特点，提出了基于输出电压误差函数分析的矩阵变换器离散调制技术，推导了基于时间离散和差分原理的电路方程。
Capacitive pressure difference sensor is fixed in the center of the tube and connected with the pulse width modulation circuit so that capacitive flow transducer is made up.
把电容式差压传感器固定在管道中央，并配接脉冲调宽电路，即构成电容式流速变送器。
This circuit beauty spot gathers, tremendous difference, travel for the classic characteristic special features that can't get much circuit.
此线路景点齐集，风光回异，为不可多得的经典个性化特色旅游线路。
This paper analyses the resonance circuit by general analysis methods and modern circuit theory, and gives the difference between the two methods and conclude the complementarity between them.
采用常规分析方法和现代电路理论方法对谐振回路进行分析，通过比较两种方法的异同，得出它们之间的互补性。
The structure, working principle, measuring circuit and frequency characteristics of contact potential difference nondestructive testing equipment using fixed probe am intro - duced.
介绍了接触电位差法固定探头式无损探伤装置的结构，工作原理，测量电路及其频率特性。
Furthermore, two temperature signals are amplified via the same amplification circuit that ensure to measure difference in temperature exactly.
另外，设计两路温度信号经过同一个放大电路确保了进回水温差的准确测量。
The difference of the circuit parameters in the two component circuits makes the quantum fluctuations in one component circuit smaller and that in the other larger.
两个分回路电路参数的不同会使一个分回路中的量子涨落减小，另一个分回路中的增加。
Signal recording method, phase difference detecting circuit, and information apparatus.
信号记录方法，相位差检测电路，及信息装置。
Before the design of digital circuit, measurement method of phase difference is discussed. Two-way zero passage phase detector is chosen as solution finally.
在正式进入数字电路设计之前，先讨论了相位差测量方法，并选定双向过零鉴相作为实现方案。
This paper presents an adaptive fault circuit selection method based on the principle that the difference of transient energy of normal circuits and that of fault circuit is.
提出一种基于暂态能量的故障选线自适应方法，利用所有健全线路暂态能量与故障线路暂态能量之差为最小值的原理，构成故障选线算法。
This circuit beauty spot gathers, tremendous difference, travel for the classic characteristic special features that cannot get much circuit.
此线路景点齐集，风光回异，为不可多得的经典个性化特色旅游线路。
When fault duration is longer than phase difference will result in fault sampling by two registers and make feedback circuit in fault state for a long time.
当故障持续时间大于三路时钟相位差时使两路时钟同时采样到故障值，在反馈型电路会导致长时间的故障状态。
The paper introduce the circuit on conversing difference signal to TTL , and introduce in detail how to gained bit-clock signal .
本文主要详细讲述了如何利用差分变换后的波形提取位时钟信号。
The difference between a fuze circuit and general circuit is discussed according to the features of the fuze circuit. And the idea of fuze design reliability is given.
针对引信电路的特点，提出了电路失效与一般产品的差别和评价的重点及设计可靠性的概念。
The biggest difference, compared to driving on a circuit, is of course that every corner is different and the scenery changes all the time.
和在赛道上驾驶最大的不同点，当然是每个弯角都是不同的，场景一直在换。
The difference between the real circuit and the design model due to the capacity mismatching, finite gain of amplifier and other analog mismatch can be simulated by MATLAB.
同时针对主要来自模拟电路的诸如实际电容的不精确匹配、放大器的有限增益等因素，通过MATLAB模型来详细分析这些模拟电路误差会对于电路性能产生的影响。
The difference between the real circuit and the design model due to the capacity mismatching, finite gain of amplifier and other analog mismatch can be simulated by MATLAB.
同时针对主要来自模拟电路的诸如实际电容的不精确匹配、放大器的有限增益等因素，通过MATLAB模型来详细分析这些模拟电路误差会对于电路性能产生的影响。
应用推荐