This paper discusses the development of a new combustion system mounted on the diesel engine model 2135g, operating on neat methanol.
本文探讨了在一台2135g型直喷柴油机上，研制燃用纯甲醇的燃烧系统。
Based on the application practice of Komatsu diesel engine model 4d and 6d the cavitation phenomenon in cylinder liner is analyzed systematically.
本文针对日本小松4d、6d等型柴油机的使用实践，系统分析了缸套的穴蚀现象。
The paper describes the research and analysis of fault monitoring and diagnosing ultra cylinder clearance for the multi-cylinder diesel engine model C6135G.
介绍了多缸柴油机（6 135G）的超磨耗标准的活塞缸套间隙进行状态监测及故障诊断的研究。
As the model adopts the modularized method, it can easily be used for different types of diesels, and can form the basis of non-linear turbocharger diesel engine models.
采用模块化建模方法，可以将模型推广到不同型号的柴油机，为非线性增压柴油机模型的开发打下良好的基础。
The characteristic of diesel engine model and neural network modeling theory are analyzed in this paper. Based on compiling arithmetic, an example as used to validate the model's reliability.
分析了柴油机模型的特点及用神经网络建立柴油机排放模型的方法，在此基础上，编写了柴油机排放模型的算法，并用一个实例验证了该模型的可靠性。
A mechanical model for the vibration insulation system of the R4105 Diesel Engine is established and the transmission of vibration is analyzed with experiment.
建立了R 4105柴油机隔振系统的力学模型，并利用实验研究对比的方法，对r 4105柴油机振动的传导进行了分析。
Analyzing the influence factors of the performance of diesel engine, the author created a ANN model for predicting the steady state performance of diesel engine and wrote visual program.
作者通过对柴油机性能参数的影响因素的分析，建立柴油机稳态性能预测的人工神经网络模型，并编写可视化程序。
This paper describes the power performance, fuel economy and reliability of ZS1100 model diesel engine and introduces its main structure.
阐述ZS1100型柴油机的动力性、经济性、可靠性，并对主要结构进行介绍。
With the numerical simulation of heavy-duty diesel engine to strengthen performance, a CAD assembly model of cylinder head bolt is built based on the thread.
结合大功率柴油机性能强化的数值计算，在考虑螺纹的基础上建立了气缸盖螺栓的CAD装配体模型；
The design targets and main Measures for improvement in design of model 6dl-20 diesel engine have been described.
概述了6dl - 20柴油机的设计目标，设计上的主要改进措施。
A mathematic model of spray wall-impingement was established based on discrete droplet model (DDM) considering the operating conditions of diesel engine.
基于离散液滴模型(DDM)，结合柴油机实际工作情况，建立了喷雾碰壁的数学模型。
A theoretical model of parallel air-powered and diesel hybrid engine's working process was established to predict the performance and judge the feasibility of the hybrid engine.
为预测并联式气动-柴油混合动力发动机的性能，判断其可行性，建立了该混合动力发动机的工作过程理论模型并进行了数值仿真研究。
This nonlinear model can be used to design and analyze the control system of diesel engine.
该模型将被用于柴油机控制系统的性能分析和控制方案设计中。
He designed his diesel engine to run in peanut oil and later Henry Ford designed the Model t car which was produced from 1903 to 1926.
他设计出的柴油发动机用花生油作为动力，后来的亨利·福特设计的T模型车在1903年到1926年生产。
By analyzing all the kinds of turbocharged diesel engine dynamic response factor, a simplified dynamic simulation model based on mean parameters is constructed in this paper.
通过分析涡轮增压柴油机瞬态响应的各种影响因素，建立了一个基于平均参数的涡轮增压柴油机的动态仿真模型。
Based on a type TBD234V12 pulse Turbo-charging and sequential turbo-charging (STC) diesel engine with 2 turbochargers, a calculating model is set up in this thesis.
本文建立了TBD234V12型柴油机采用两台增压器常规增压和相继增压的计算模型，进行了工作过程计算。
A transient process and steady state simulation model of underwater diesel engine system, including governor, diesel engine and rear exhaust pipe system, was developed and verified in this paper.
建立了包括调速器、柴油机本体、后排气管路的水下柴油机动力系统的动态及稳态过程分析模型，并进行了试验验证。
Improvement was carried out on a model of heavy duty diesel engine to optimize combustion process and emissions.
以优化燃烧过程、改善排放性能为目标，对某重型柴油机进行改进。
The simulation results show that this model reflect the turbocharged diesel engine dynamic characteristics well and can be used in the dynamic simulation of total vehicle system.
仿真的结果表明，这个模型较好地反映了涡轮增压柴油机动态特性，可以将此模型应用于整车的动态仿真中。
The application of the control algorithm based on modifying factor fuzzy model to a diesel engine is introduced.
介绍了基于修正因子模糊数模型的模糊控制算法在柴油机调速技术上的应用。
Based on control volume model often used for steady state simulation and crank-connecting rod model, a torque generation model for a two-stroke diesel engine was established.
在常用于稳态仿真的容积法模型基础上，结合曲柄连杆机构的动力学模型，建立了二冲程柴油机的扭矩预测模型。
A diesel engine fault diagnosis model based on three-layer BP network is put forward, an step-changing learning algorithm based on gold-segmentation is given.
提出了一种基于三层BP网络的柴油机故障诊断模型，给出了一种基于黄金分割法的变步长学习算法。
Applying random trouble process model theory of maintainable system, this paper tests reliability and maintenance on China-built 190a model diesel engine.
应用可维修系统随机故障过程模型理论，对国产190a型柴油机进行了可靠性和维修性试验。
The structural parameters of swirl flow exhaust system for Model N8160ZC diesel engine have been calculated by using the mathematical optimum method for optimum design.
采用数学规划优化方法对N8160ZC柴油机新型螺旋流排气系统结构参数进行了优化设计；
The model was applied to a diesel engine and the results demonstrated that the reliability of crankshaft might be improved considerably.
计算结果表明，曲轴可靠度大幅度提高，效果十分显著。
Taking the 2105A model diesel engine as an example, this paper investigates the vibration signal of running engine surface caused by the different cylinder clearance.
本文以2105A型柴油机为例，探讨了柴油机工作状态下气缸壁间隙不同时所引起的机体振动信号。
Improved treatment of above-mentioned factors can reduce the oil consumption rate of diesel engine fuel of Model 4135g.
对上述因素进行改善处理，可以降低4135g型柴油机燃油油耗率。
The reliability for the crankshaft of model 4125 diesel engine is studied on the basis of the crankshaft fatigue life test be carried out.
以4125柴油机曲轴的疲劳寿命试验为依据，对该柴油机曲轴进行了可靠性分析与研究。
By this model, simulation about speed regulation of 6105Q diesel engine is made. Based on the result of simulation, the control parameters are got by experiments.
利用该模型可分析各参数对发动机控制的影响进行仿真，并利用仿真的结果指导6105Q柴油机数字式电子调速器的参数整定实验。
By this model, simulation about speed regulation of 6105Q diesel engine is made. Based on the result of simulation, the control parameters are got by experiments.
利用该模型可分析各参数对发动机控制的影响进行仿真，并利用仿真的结果指导6105Q柴油机数字式电子调速器的参数整定实验。
应用推荐