Die structure and design para meters, techno-economic analysis were introduced.
介绍了其模具结构、设计参数及技术经济分析。
Further, die structure and working process, as well as critical parts design are mainly introduced.
重点介绍了模具结构和工作过程及重要零件的设计。
Die structure characteristics and working procedure were introduced and edging process was analyzed.
介绍了复合模的结构特点及工作过程，分析了齐边的工艺过程。
The design analysis and die structure of typical common punching die of button contact are introduced.
介绍了一副典型的普通触指冲落模的设计分析和模具结构。
Such fine blanking process simplifies die structure, easy to make and to install, and also has low cost.
这种精冲方法，模具结构简单，易于制造和安装，成本低。
According to the parts demand in quantity and structure characters, its process and die structure are analyzed.
根据零件的需求量及结构特点，对其工艺、模具结构进行了分析。
According to the structural characters and production quantity, the process and die structure of parts are analyzed.
根据产品零件的结构特点和生产量，对其工艺、模具结构进行了分析。
The type, application, technological parameters and die structure of the cross-wedge-rolling technology were introduced.
介绍了楔横轧工艺的类型、应用、工艺参数及模具结构。
Finally, each optimized design parameter of the concave die structure had achieved, and obtained the anticipated result.
最后达到了凹模结构的各个参数的优化设计，得到了预期的结果。
It designs a quick-change punch die structure, which can be used for combination punch die and flexible punch press system.
设计了一种可应用于组合冲模及柔性冲压系统的快换冲模机构。
Material compoSition, compacting method and die structure of P/M bush with step and prismatic surface on cylinder were outlined.
介绍带台阶并在圆柱体上有三棱面的粉末冶金村套的材料配方、压制方法和模具结构。
The die structure of gangplank is analyzed. In order to enhance structure intensity, an improved mould structure is put forward.
文中分析了通路板下模的结构，为了增强地板的结构强度，提出了改进设计及合理的模具结构。
Piercing technology of the rear mudguard of motorcycle has been analysed and the die structure has been emphatically introduced.
分析了摩托车后挡泥板的冲孔工艺，着重介绍了摩托车后挡泥板冲孔模的结构。
Discuss punching small thread fluted opening technology, die structure, die design and die manufacture technology on thin sheet.
论述了在薄板冲压件上，用变薄翻边冲制小螺纹底孔的工艺、冲模结构、设计与制作技术。
The forming technology of balance weight cover of fork truck is analyzed. Die structure and working part design is also introduced.
分析了叉车平衡重后盖的成形工艺，介绍了模具结构及主要工作部分的设计。
Analyzed forming process of the fixed frame in automobile steering system, mainly introduced side hold punching die structure design.
分析了汽车转向系统中固定架的成形工艺，主要介绍了冲侧孔的模具结构设计。
The design of die structure has much influence on shape dimension and precision of the formed crank-arm with a non elliptical section.
对于非椭圆截面曲臂的大型曲轴，其模具结构设计对曲轴成形后的形状尺寸精度影响极大。
The pressing process of transforming throwout lever is analyzed, Layout of multi-position progressive and die structure are introduced.
分析了转换推杆零件的冲压工艺，介绍了带料排样方案及级进模模具结构设计。
The structural design and working process of roll-groove die, as well as the improved die structure and its application are introduced.
介绍引进滚槽模具的结构设计及工作过程，以及改进后的模具结构及应用。
The forming process of pressing for farm transporter frame is analysed, the die structure and its design process are introduced in detail.
对车架冲压件的成形工艺进行了分析，并详细介绍了模具结构及其设计过程。
Large weldments in die structure will be machined on the mating surfaces, screwed together, welded, and normalized before final machining.
模具中的大型烧焊件必须在配合面上进行加工并用螺丝所在一起，在最终加工前必须焊接及处理。
The drawing die structure of aluminum foil snack box and marginal pressure design program are introduced, the die structure is complicated.
介绍了铝箔快餐盒拉伸模结构及压边的设计方案，此模结构较复杂。
A design and manufacturing technology of die structure with high efficiency and practicality was developed on a typical die of persian blinds.
上下模刃口间隙要合理，针对典型的百叶窗模具给出了一种实用的高效率的模具结构设计及其制造工艺。
The forming technology of rear shock absorber cap is analyzed, and its drawing die, flanging die and spinning die structure are also introduced.
分析了后减震器帽的成形工艺，介绍了成形该零件的拉深模、翻边模以及旋压模具结构。
Both layout design and die structure design are stated, and the structure design of convex die components of rolling drum are introduced in detail.
叙述了卷筒排样设计及模具结构设计，并介绍了卷筒凸模零部件的详细结构设计。
The structural characteristics of aluminum alloy cover was analyzed, and the design of pouring system and die-casting die structure were introduced.
分析了铝合金端盖压铸件结构工艺性特点，介绍了压铸模的浇注系统及模具结构设计。
Die structure based on the process of forming small fillet radius is introduced, and deduced the formula according to the principle of volume invariably.
介绍形成小圆角半径的圆孔翻边模具的结构特点，按体积不变的原则，推导了计算公式。
In this paper, die structure and design parameters, techno - economic analysis of liquid extrusion for the aluminium alloy oil pump body were introduced.
本文介绍了铝合金油泵壳体液态挤压的模具结构及设计参数、技术经济分析。
Furthermore, the backboard die structure and forming technology principle of forming by combining positive and inverted directions are stated in emphasis.
并对正向与反向混合成形的后板模具结构、成形工艺原理给予重点阐述。
Combining the example of drawing die design for the rear side member of automobile body, studied on the drawing die structure design of saddle-shape part.
结合车身零件——后纵梁拉伸模具的设计实例，对马鞍形汽车车身零件的拉伸模具的结构设计进行了研究。
应用推荐