The process of design includes the structure design of the vibrating device and the calculation of kinetics parameters and electromagnetism parameters of the vibrating device.
最后进行了与摇摆机相结合的激振装置的设计，包括激振装置的结构设计、激振装置的动力学参数和电磁参数的设计与计算。
This paper gives emphasis to structure, performance, key point of design and key link of operation of an ignition device over bed in fluidized bed boiler.
本文重点介绍流化床锅炉床上点火装置的结构、性能、设计要点及其操作要领。
The effects of DBR reflectivity and well Numbers on threshold current and output power of bottom-emitting VCSELs were analyzed to design an optimal device structure.
分析了腔镜反射率、量子阱数等参数对阈值电流、输出光功率的影响，并根据理论计算对器件参数进行了优化设计。
This paper presents the storage device sector location and FAT document structure. Then it introduces how to design the FAT file management system in embedded system.
介绍了存储设备的分区以及FAT文件结构，并给出了在嵌入式系统中，实现FAT文件系统的方法。
For design of STATCOM device the different control method and main electric structure can be selected according to different requirements for system and control targets.
在设计STATCOM装置时，可根据系统要求的不同，控制目标的不同，选取不同的控制方法和主电路结构。
The main structure of the device, the selection of the microprocessor, the design of analog inputs, and the A/D sampling method are argued in detail in this dissertation.
论文中对装置的主体电路结构、主控芯片的选择、模拟量输入通道设计和A/D采样方法进行了详细的方案比较和论证。
Special design structure and application of the quick screen changing device in this field are described.
阐述了快速换网装置在该领域应用过程中的特殊设计结构和使用方法。
The system formation and function characteristics of the speed monitoring device are outlined, with detailed introduction of its hardware structure and software design.
概述了速度监控装置的系统组成，功能特点，对硬件结构及软件设计作了较详细的介绍。
For an agitating device, the structure design of agitating shaft directly influences the mixing qualities of chemicals.
在搅拌装置中，搅拌轴的结构设计直接影响到搅拌混合质量。
In the layout design of the power device, a circular structure was adopted to avoid the spherical junction and reduce the curvature effect.
该功率器件的版图设计为圆形结构，避免了球面结的形成，有效的降低了曲率效应造成的电场集中。
The paper introduces the working principle and structure of a new communication tested device for underground outstations. It also discusses some key techniques and software design of this device.
介绍了一种新型井下分站通信测试装置的工作原理及结构，并对该装置的一些关键技术和软件设计进行了讨论。
This article introduces the functions, design principles, structure and design features of the water distribution device.
本文简要介绍了水分配装置的功用、设计原则、结构设计和设计特点。
The structure design of the forming roller device was introduced and the force-mechanism of the roller head was analyzed.
介绍了成型辊装置的结构设计，并对其辊头受力机理进行了分析。
The structure design of the key component of the high temperature air generator, namely the shunt device, was expatiated in detail.
对高温空气发生器关键部件的分流装置的结构设计进行了详细阐述。
This paper describes the structure design project of rotating device sustained azimuth branch in some big antenna pedestal.
介绍了某大型天线座方位支承转动装置的结构设计方案。
This paper introduces the structure, composition, working principle and design character of automatical welding device of YSP 15 liquidized petroleum bottle valve base.
介绍了YSP -15型钢瓶瓶阀座自动焊接装置的结构、组成、工作原理及设计的主要特点。
The article describes structure, working principle, design method and characteristics of general pneumatic dust collecting device with equal section main pipe for largescale wood processing mills.
本文阐述了通直等断面主管道式通用型气力吸集装置的结构、工作原理、设计计算方法及使用特点。该系统适用于大型木材加工车间。
Firstly, the selection of the ferrite material and the structure design are discussed, the method of improving the differential phase shift of the device is also presented here.
首先讨论了器件的铁氧体材料参数的选取和器件结构的设计以及提高器件差相移的方法。
Introduce basic ideas, design principles, structure, using methods and clinical applications of this device.
介绍了该机的基本构思，设计原理，结构，使用方法，及临床运用。
In this paper, the material choice and structure design of the device and purifying units are analyzed.
本文仅就该净化器箱体和净化单元的材料选用及其结构设计作一初步分析。
This article discusses the structure of WIMS based on CC2510, and gives the procedure to design the software of the wireless end-device (WED).
本文讨论了基于CC2510无线输液监测系统的一般结构，给出了系统中无线终端的软件设计过程。
The design curves of equivalent damping ratio to the brace stiffness, and ratio of maximum damping force of the damping device to the inter-story yield shear force of the structure are proposed.
本文就消能减震结构设计参数，即消能部件的支撑刚度、层间最大阻尼力与结构层间屈服力比值等恢复力模型参数的选取进行了讨论。
The structure and design principles, manufacture process and assembling method of a new seal device for rotary kiln are described, and the application results are also introduced.
阐述偏心调整式回转窑密封装置的结构与密封原理、加工制造方法和安装技术要点，并介绍了具体应用情况。
The design principle and main structure of a bottle filling device for small quantity powdery material are discussed.
讨论了一种小剂量粉末状物料装瓶机构的设计原理、组成结构。
This article primarily introduces the structure type, operation feature as well as design calculations of the device.
这里着重介绍了辊式校平机的结构形式、使用特点、设计计算等。
Objective To introduce the technique theory, structure design, technique data and clinical use of a portable Negative Pressure Wound drainage therapy device.
目的介绍一种便携式负压创面引流治疗装置的技术原理、结构设计、技术指标和临床使用情况。
The structure, technical parameters, main feature, design&calculation and test auxiliary system and so on of new and high-performance test device for mechanical seals for agitators were introduced.
介绍了新型高参数釜用机械密封试验装置的结构、技术参数、主要特点、设计与计算及试验系统等。
In the part of device design, the thesis will propose a new structure of LAPS array.
在器件设计中，本文将提出一种新结构阵列化laps芯片。
A calculation of optimal design for the structure of tensile test device has been made, for the purpose of increasing the preciseness of the tensile test.
本文从提高带材张力测试精度出发，对两台单机座冷轧机的张力测量装置的结构参数进行优化设计计算。
A calculation of optimal design for the structure of tensile test device has been made, for the purpose of increasing the preciseness of the tensile test.
本文从提高带材张力测试精度出发，对两台单机座冷轧机的张力测量装置的结构参数进行优化设计计算。
应用推荐