Based on aircraft sensitivity, a robust design optimization method is proposed.
提出了一种基于灵敏度分析的稳健设计优化方法。
Adopts fuzzy design optimization method for the sample of traction mechanism in tower hoist on the basis of fuzzy maths.
针对塔式起重机变幅机构的设计实例，在模糊数学的基础上采用模糊优化设计方法求解。
This paper studied multidisciplinary hierarchic compatibility design optimization method for design of hierarchic system.
针对层级系统的优化设计问题，研究了多学科层级协调优化方法。
Based on reliability data, regard design wind pressure as an optimization factor, conclude a convenient and effective design optimization method.
在基于可靠度的基础上，以设防风压作为优化参数，从而得到切实可行而又非常有效的优化设计方法。
Compared with traditional design optimization method, MDO method can gain the optimum design for flight vehicle as well as the optimum thrust-time curves of booster.
与传统设计优化方法相比，MDO方法一次设计优化就可得到满足飞行器总体设计指标的最优设计，得到内外弹道相匹配的助推器最优推力-时间曲线。
With the developments of computer techniques and calculation techniques, optimization method is one of main approaches to design linkage.
随着计算机技术和现代计算技术的迅猛发展，优化方法成为机构分析和设计的主要手段之一。
A design oriented method for the dynamic design optimization of composite rotor blades is presented.
提出一种面向设计的复合材料旋翼桨叶结构动力优化方法。
A numerical example shows that the structural analysis and optimization design model and method in this paper are valid and feasible.
算例表明：文中提出的随机结构分析和优化模型与设计方法是合理、可行和有效的。
By analyzing the principle of optimization, a new optimization method for fuzzy controller's design is put forward.
通过分析对模糊控制器作优化的原理，提出了一种新的优化设计方法。
And attempt to regard this as the break though point, find a simple and feasible method for gear transmission optimization design.
并试图以此为突破点，为齿轮传动优化设计找到一个简便可行的方法。
The method of the optimization design for gear wheel spoke which is based on CAD model is investigated.
对一种基于二维CAD模型的齿轮辐板优化设计方法进行了研究。
The optimization design method is proposed for feed-forward neural network structure by means of chaos ergodicity and randomicity.
提出一种关于多层前向神经网络结构的混沌优化设计方法。
Actual calculation shows that optimization has great advantages than traditional design method.
实际算例表明，优化设计比传统设计有很大的优越性。
In this paper, we introduce the basic theory and the design of CFA, and analyze the field of CFA by CSM on the basis of method of optimization.
本文基于最优化理论，利用模拟电荷法对一个小型的交叉场天线（CFA）进行了场的数值分析，得到CFA周围的电场、磁场及玻印廷矢量的分布。
The result indicates that the method could improve optimization design efficiency and quality.
结果表明，该方法可大大提高齿轮结构参数优化设计编程的效率和质量。
The mathematical model of optimization design for swing movable teeth drives is set, and the optimization design method is proposed in this paper.
本文建立了摆动活齿传动的优化设计数学模型，提出了优化设计方法。
This paper applies vague overall evaluation for indoor environment design scheme optimization, and introduces the basal theory and calculation method.
本文将模糊评价法引入室内环境设计方案的优选过程，介绍了模糊评价法的基本原理和计算方法。
This paper provides some Suggestions concerning the selection of water resources, the method for water transportation and pipeline optimization on the basis of design practices.
本文根据一些远距离供水工程的设计实践，对水源选择、输水方式和线路优选等问题提出了见解。
Optimization design method of welded structure was put forward with welded joint fatigue damage as constraints.
提出考虑焊接接头疲劳损伤约束的焊接结构抗疲劳优化设计方法。
In order to achieve the best characteristics of the setting value tracking and the disturbance rejection, a PID controller optimization design method is put forward.
为使PID控制器同时具有给定值跟踪和抑制干扰两个方面的最佳特性，提出了PID控制器优化设计方法。
Taking the absorption stabilization system of a FCCU as an example, proposed an integrated design, optimization and evaluation method for commercial chemical units.
以某催化裂化装置吸收稳定系统为例，提出一个工业化装置集成化设计、优化和分析的方法。
In order to reduce the weight of an aerial telescope main structure, a topologic optimization design method of the aerial telescope main frame was presented.
针对某航空望远镜主结构的重量过高的问题，提出了对航空相机望远镜主框架进行拓扑优化设计的方法。
Optimization design method based on fuzzy fiduciary level is proposed to reduce deepsea high pressure airtight cabin weight.
为了减轻深海高压密封舱的重量，提出基于模糊可靠度的优化设计方法。
The experiment optimization design method are used to the craft parameters optimal.
运用试验优化设计的方法，优化了工艺参数。
Based on the unified design variable method, the shape and sizing optimization design of jacket platform with dynamic ice-load is investigated.
基于统一设计变量方法，实现了导管架海洋平台在动冰载荷作用下的截面和形状动力优化设计。
Based on finite element theory and optimization theory, considering mechanical properties of the structure, the reliability optimization design method of tower truss system is presented.
根据有限元理论及最优化理论，同时考虑结构受力特点，给出了塔架体系在可靠度约束下的最优化设计方法。
To solve this problem, a component optimization design method based on stability dependency was presented.
为此，提出了一种基于稳定依赖的构件优化设计方法。
To effectively reduce the injection-machine mould-board weight, sequential optimization design method starting from high level topology optimization to low level parameter optimization was proposed.
为了有效地降低注塑机模板的重量，提出了从高层次拓扑优化到底层次参数化优化的顺序优化设计方法。
To effectively reduce the injection-machine mould-board weight, sequential optimization design method starting from high level topology optimization to low level parameter optimization was proposed.
为了有效地降低注塑机模板的重量，提出了从高层次拓扑优化到底层次参数化优化的顺序优化设计方法。
应用推荐