This paper studies and analyzes the hardware system reliability design of satellite-carried parallel computer.
本文研究并分析了星载并行计算机硬件系统的可靠性设计。
This paper introduces the design & implementation of a parallel file system based on direct data access, and gives out the primary functions and key technologies of parallel file system.
该文介绍了一种基于直接数据访问的并行文件系统的设计和实现，阐明了该并行文件系统具备的主要功能及解决的关键技术问题。
It introduces the design of solar and external power parallel supply system on mountain microwave station.
介绍了山上微波站太阳能与外接电源并行供电系统的设计。
This paper discusses the design of Scheduling Policy and the choice of Scheduling algorithms through a practical parallel processing system.
文章讨论了调度策略的设计和调度算法的选择，并通过一个实际的并行处理系统加以说明。
According to the traditional PCs defect that the PCI bus forms the bottleneck of system communication, we propose the design of Parallel PC architecture for switching network centric.
针对传统的PCI总线结构形成系统通信瓶颈的缺陷，提出了以交换网络为中心的可扩展并行PC体系结构设计思想。
Finally, it offers an example on parallel auto-checkout system, including hardware structure, software design of the system, which increases speed and veracity of material coding checkout.
最后，给出了一个并行自动校验系统实例，包括系统硬件构成、软件设计，提高了物资编码校验的速度和准确性。
A design scheme of motion control system based on parallel port of computer was proposed.
提出了一种基于计算机并行口的运动控制系统的设计方案。
In this paper, the design and realization of parallel measurement and control system communicating with at keyboard interface are reported.
本文设计并实现了用标准AT计算机键盘接口进行数据通讯的并行测控系统。
The characters and reality of double parallel system UPS, external bypass design and operation, and the Suggestions about the ordinary maintenance are introduced also.
介绍了并联系统ups的特性及其实现，现场外接旁路的设计与具体操作，以及日常维护中的问题。
This paper discussed the design and development of parallel system MCC based on message passing mechanism.
本文讨论了基于消息传递机制的并行处理系统MCC的设计和实现方案。
This paper presents a design of an intelligent memory system (IMS) for our Parallel Graph Reduction (PGR) machine.
本文介绍了并行图归约（PGR）机中智能存储系统的设计方案。
From the result we can see that the design of each function module of the high speed parallel signal processing system is satisfied with the technical demands.
调试结果表明，高速实时并行信号处理系统的各个功能模块的设计达到了工程设计的技术指标要求。
This paper discusses collectivity project for design of parallel welding equipment, and introduces machine's frame, power supply, mechanical system, electric control system and their mutual interface.
论述了平行缝焊设备的研制及总体设计方案，介绍了机体、电源系统、机械系统、控制系统及其相互配合。
Based on the application of ADAMS in the analysis of multi-rigid (deformable) -body system, ADAMS is applied to parameterized design and simulation of a planar parallel manipulator 3-rrr.
基于ADAMS软件在多刚(柔)体系统分析中的应用，将ADAMS软件应用于平面3 -RRR并联机器人的参数化设计与仿真。
The design and realization of SHARC parallel process system based on VME bus were studied.
研究基于VME总线SHARC并行处理系统的设计与实现。
In order to realize the normal data communication between each part of the system, we adopt serial communication and parallel communication technology, and design the communication protocol.
为了实现系统各部分之间正常的数据通信，本课题采用了常用的串行通讯和并行通讯技术，并制定了一套完整的通讯协议。
The paper introduces the design of the software and hardware of the opening NC system for the parallel machine tool.
介绍了并联机床开放式数控系统的软件、硬件设计。
Experiment result approved the feasibility, correctness and validity of the design of hardware and software of the parallel mechanism control system.
实验结果表明了本并联机构控制系统硬件与软件设计的可行性、正确性与有效性。
An example of multi-DSP chips' parallel processing system is discussed in this paper, which consists of 20 TMS320C31 chips, and the frame of hardware and software design are discussed in the meantime.
本文介绍了以20片TMS320C 31芯片组成的多dsp芯片并行处理系统的设计实例，并给出了系统硬件组成和软件设计。
This paper analyzes shortcoming of microprocessors parallel extension and advances serial extension to optimize the system design.
分析了单片机系统并行扩展的缺点，提出用串行扩展来优化单片机系统。
This paper discusses the precision design concept of modern body, and apply parallel engineering to make the precision quality system throughout the whole process of design and production.
阐述了当代车身精度设计的理念，采用并行工程，使精度质量体系贯穿设计、生产全过程。
The design of complex system can be non-hierarchically decomposed into several parallel subspace design tasks, and the multidisciplinary optimization can be considered as the game of the subspaces.
复杂系统的设计问题可以非层次分解为并行的多个子空间优化设计问题。
The paper presents a high-speed circuit design flow based on SI simulation, and illustrates this design flow using a design instance of high performance DSP parallel system.
文章讨论了基于SI仿真技术的高速电路设计流程，并结合高性能DSP并行系统设计实例进行展开说明。
Shortcoming of microcomputer system's parallel extension is analyzed, and serial extension to optimize design of system is advanced.
分析单片机系统并行扩展的缺点，提出用串行扩展来优化单片机系统。
PEMS is a parallel-embedded operating system, which is designed for the satellite-carried parallel computer system. The design of PEMS refers to the real time operating system RTEMS.
PEMS是一个以rtems为参考、针对星载并行计算机系统特点设计和实现的嵌入式并行操作系统。
Introduces a device control system design based on micro -computer parallel port, gives the concrete design method of system hardware and software according to system requirement.
介绍了基于微机并口的某设备控制系统，并根据系统要求，详细讨论了系统的硬件和软件设计方案。
The key problem is to create a classification number descriptor parallel index database during the design of a vocabulary switching system.
本文针对手工建立分类表叙词表转换系统的缺点，用计算机设计了一个分类表叙词表转换系统。
The distributed power architecture is generally used in the power system of massively parallel computers. The most important factor is system stability in the bus architecture design.
大规模并行计算机电源系统通常都采用分布式供电架构，系统稳定性设计是其中的难点和关键点。
This design made full use of DSP's powerful data processing ability and FPGA's high-speed parallel processing ability, and it improved the image processing of vision system of chess robot.
本设计充分利用了DSP的强大数据处理能力和FPGA的高速并行处理能力，提高了象棋机器人视觉系统的图像处理性能。
This design made full use of DSP's powerful data processing ability and FPGA's high-speed parallel processing ability, and it improved the image processing of vision system of chess robot.
本设计充分利用了DSP的强大数据处理能力和FPGA的高速并行处理能力，提高了象棋机器人视觉系统的图像处理性能。
应用推荐