Examples given demonstrate that for the cognate linkages as long as the design equations and indi...
实例说明，开式机构综合的这种分族研究方法可使设计工作大为简化。
Examples given demonstrate that for the cognate linkages as long as the design equations and indirect p…
实例说明，开式机构综合的这种分族研究方法可使设计工作大为简化。
According to the design equations of class-E amplifier, we have analyzed the relationships between the output power and the input voltage.
根据E类放大器的设计方程，分析了E类放大器输出功率与输入电压的特性。
Design equations of cold-formed stainless steel square and rectangular hollow sections subjected to web crippling are proposed in this paper.
本文给出了冷成型不锈钢方钢管和矩形钢管在腹板屈曲时的设计公式。
If there is a good binding between metal and spacing layer, the design equations given in the paper are available for any film as spacing layer.
如果金属与间隔层结合良好，本文中给出的设计计算公式适合于做间隔层的任意膜层。
Based on two design equations, this paper presents a design method of the dielectric-covered slots arrays in the narrow face of a rectangular wave-guide.
本文中提供了敷介质矩形波导窄边缝隙天线阵的一种设计方法，给出了两个设计方程。
The ballistic limit equations, design equations, and application techniques applicable for the multilayer shock shield were summarized from the view of engineering application.
从工程应用角度，总结了适合于多层冲击防护结构的弹道极限方程、设计方程和应用技术。
The article presents design equations and techniques for the complete shaking force and shaking moment balancing of eight-bar linkages due to both linear and rotary inertia, except external loads.
本文利用质量分布和附加两种惯性配重相结合的方法，完全平衡了八杆机构的摆动力和摆动力矩。
The equations derived by the eccentric genius are still used to design cars, build bridges and send spacecraft into the cosmos.
这一奇才推出的方程式至今沿用在汽车设计、桥梁修建、宇宙飞船发送这些领域。
In design of pulsed asynchronous sequential circuits, it will solve for equations of clock and equations of state, on a symbolic Karnaugh map.
在异步时序电路设计中，它将时钟方程和状态方程的求解归在统一的符号卡诺图上进行。
The multigrid techniques are added to accelerate the convergence of flow and adjoint equations to improve the efficiency of design.
为了提高计算效率，将多重网格方法应用到方程的数值求解中来加速收敛。
Borrowing the traditional two-speed approach originally developed in conventional attitude integration, we design one new numerical integration algorithm to solve the three kinematic equations.
借鉴成熟的姿态四元数积分的双速算法结构，设计了一个数值积分算法求解以上三个运动学方程，构建了基于对偶四元数的捷联惯性导航算法。
In solving the regression equations, collinearity in the design matrix can result in inaccurate parameter estimates.
在解回归方程时，设计矩阵中的共线性可能产生不精确的参数估计。
Basing on the physical concepts with the imaging process of SEM, the calculating equations used for improving the design and the function of the instrument have also been deduced.
基于同扫描电镜成像过程有关的物理概念出发，还推导了有关改进仪器设计和功能所引用到的计算公式。
The method to get it can be used to simplify the proving process of some logic equations, as well as some design processes of logical circuit.
利用这种表示反函数的方法，可简化一些逻辑等式的证明过程，并可使一些逻辑电路的设计过程简化。
By the matching design method, the dynamical equations of dosed loop system can match those of the open loop system.
方法采用匹配设计方法，通过匹配条件，使开环系统与闭环系统的动力学方程匹配。
Based on the steady state equations of the motor for the design of VSVF, VSVF can control the torque to a certain extent, but it cannot implement the real control in the dynamic process.
转差频率控制能够在一定程度上控制电机的转矩，但它是以电机的稳态方程为基础设计的，并不能真正控制动态过程中的转矩。
The adjoint variable method for design sensitivity analysis of multibody system dynamics based on ordinary differential equations is presented.
基于常微分方程数学模型建立了多体系统动力学设计灵敏度分析的伴随变量方法。
The principle, dynamic equations of variables and design concept are given. The characteristics of this circuit are presented in this paper.
给出了此电路的工作原理、动态变量方程和设计原则等理论结果，分析了该新型电路拓扑的特点。
It keeps the method of calculation rolling pieces and pass design respective - ly from making error by using method of reducing non-linear equations.
采用求解非线性方程组的方法设计孔型尺寸，避免了因轧件尺寸和孔型尺寸分别计算所造成的误差。
Based on properties of the hypergraph, a universal calculation is proposed, which is consistent with experience equations and the experience data in the blasting design.
基于超图的性质，提出了一个在爆破设计中由经验公式和经验数据组成的通用的计算公式。
Through the uniform design of the regression equations and the correlation coefficients, of and the combinations when the highest value or highest value were obtained.
通过均匀试验设计得出各指标（峰值粘度、破损值、回生值）的回归方程及相关系数，确定了各指标最高或最低时各因素的组合。
The paper presents a direct method for calculating cutting edge curve of a concave worm hob in worm hob design of worm-gearing, which avoids solving engage equations.
本文对圆柱蜗杆传动的滚刀设计中的刃口曲线的计算提出了一种能避开啮合方程的直接算法。
To implement the constraint equations for the special design feature in log hauling trucks, a procedure is developed allowing the use of the code for general-purpose dynamic analysis of the trucks.
采用一般卡车通用动力学分析程序，只需补充描述原木拖车特殊设计特征的约束方程，上述算法即可实现。
Use Chaos and fractal analysis routines, LCMV optimization design array signal processing, Multivariate least squares fitting method of nonlinear equations.
使用混沌与分形分析的例程，LCMV优化设计阵列处理信号，利用最小二乘法进行拟合多元非线性方程。
The author also provided basic pressure drop equations for different flow regimes of bulk Solids and Slurry Pipeline Transportation design calculation procedures.
并给出了对于不同物料流动状态的压力损失计算公式及浆状管道输送的理论设计计算步骤。
Based on the nonlinear power coupled equations of fiber Raman amplifiers (FRA), the optimal design to the pumps source has been done with modified genetic arithmetic in this paper.
本文基于光纤拉曼放大器(FRA)的非线性功率耦合方程，利用改进的遗传算法对泵浦源实施优化设计。
Based on the demands of two limit states, the design control equations of cross section for prestressed concrete beam are derived and the direct design method is presented.
根据两类极限状态的基本要求，建立了预应力混凝土梁截面设计的控制方程，提出了直接设计方法。
Finally it introduces the active admittance method and three designed equations which are used to design the radiation surface.
最后阐述了有源导纳法，以及设计辐射阵面的三个设计方程。
Finally it introduces the active admittance method and three designed equations which are used to design the radiation surface.
最后阐述了有源导纳法，以及设计辐射阵面的三个设计方程。
应用推荐