Into the fourth on how to design cutter suction dredger construction simulation system for the entire process of the main interface.
第四局部为引见若何设计绞吸挖泥船施工模仿系统主界面的全过程。
In this paper, we introduce the principle of metallographical cutter control system and the design method of software and hardware based on the AT89S52 singal-chip microcomputer.
介绍了以AT 89s52单片机为核心的金相切割机控制系统原理和软硬件设计方法。
It is important for the choice of sharpening parameters and the design of sharpening equipment of the cutter.
该模型的建立为球头立铣刀刃磨参数选择及刃磨装置设计具有重要的作用。
The development of high speed milling cutter and parametric design system provide firm base for the further research of high speed cutter product.
高速面铣刀及其参数化设计系统的研制，为进一步开展高速刀具产品化的研究奠定了坚实的基础。
It is very difficult to design and manufacture milling cutter because its intricate geometry configuration.
但由于螺旋立铣刀结构形状极其复杂，给设计和制造带来困难。
The optimum design method of involute internal gear slotting cutter is introduced.
介绍了渐开线直齿内齿轮插齿刀的优化设计方法。
This paper on the basis of analysis of moulding mode of glass mosaic roller-plate and roller-roller form and the selecting stndard, discusses the principles of design and manufacture about cutter.
文章在分析玻璃马赛克辊板式和对辊式、成型方式及其选择原则的基础上，论述了对辊式成型机的成型模具切刀设计与制造原理；
This article discussed the multi-thread technology application in numerical control system software design of flame cutter based on the movement control card.
讨论了基于运动控制卡的火焰切割机数控系统的软件设计中多线程技术的应用。
The design issue of the special gear shaper cutter for lock gears is researched. The basic method, calculating formulas and procedure of designing the gear shaper cutter are discussed.
对锁闭齿轮专用插齿刀的设计进行了研究，并讨论了这种刀具设计的基本方法、计算公式以及设计步骤。
Screw whirling milling is one of the screw manufacturing processes with high production efficiency. In this paper the whirling milling principle and cutter design are described.
旋片铣削螺纹是一种生产效率较高的螺纹加工方法。介绍了旋片铣削工作原理及其铣刀设计。
The design of the special cutter makes three coordinate numerical control slope cutting metal sheets be realized.
专用刀具的设计使三坐标数控倾斜切削金属薄板得以实现。
The structure of CAD system of finger type milling cutter used for large module gears and the design method of finger type milling cutters are introduced.
介绍了大模数齿轮指形铣刀计算机辅助设计系统的结构特点和指形铣刀的设计方法。
By analysis of tooth profile of chain wheel machined with form milling cutter in our company, an improved design of form milling cutter and the application result after improved are introduced.
对我公司以往成形铣刀加工链轮齿形存在问题进行分析，介绍改进成形铣刀的设计及改进后的使用效果。
This paper introduces the generating method and presents equation, characteristics, some design considerations and manufacturing method of tooth profile of the cutter.
本文介绍了针轮销孔展成技术，给出了刀具齿廓方程、特点及其设计方法。
By using the system, the design and drawing of the disk cutter can be carried out conveniently and rapidly.
该系统可方便、快捷地实现盘形链轮铣刀的设计与图形绘制。
This paper concludes the designing of the external tooth shaping cutter for tooth tip relief as a double-aimed optimization problem and proposes a mathematic model of optimum design.
把修缘角外插齿刀的设计归结为一个双目标的优化问题，建立了优化设计的数学模型。
The boring cutter for ultrasonic torsion vibration boring holes is designed and the technique of design is discussed.
设计了一种满足超声波振动镗孔要求的镗刀。
The substance of this kind of cutter is described and a design result is given at the end of this paper.
对不等齿距端铣刀的实质进行了分析，并给出了设计结果。
The object"the CAD system for shaped milling cutter"is a project application software which works with computer aided design and parameterized modeling.
课题开发的企口铣刀CAD系统是一个利用计算机辅助设计和参数化绘图的工程应用软件。
The equation can also be used as a reference for milling cutter design and optimized selection of stainless steel milling parameters.
有关分析结果对铣刀的设计及不锈钢铣削参数的优化选择有一定的参考价值。
The basic structure design of the left and right step face milling cutter with carbide circular inserts is briefly introduced, amplify on the cutter parameter of geometry and structure.
介绍了装有硬质合金圆刀片的左右阶梯端铣刀的基本结构，对其几何参数和结构参数作了进一步分析。
It can simulate the process of radial shaving cutting, and then deduce the gear profile to be shaved. By comparing with the involute profile, the correction of the cutter design method can be tested.
该拟合曲面可用于虚拟径向剃齿过程，从而生成被剃齿轮齿面，通过与渐开线齿面比较，可检验刀具设计的正确性。
It pointed out that the design of gear cutter should greatly increase the tooth point arc so as to reduce the stress concentration to increase the force of tooth root.
指出通过计算作出图形，可分析出滚刀齿顶圆弧的设计是否合理。
Because of the high requiring of the size, shape, position precision and roughness of pinhole, a high precision boring cutter is required to design and manufacture.
由于销孔尺寸、形状和位置精度及粗糙度的要求都很高，一般都需要设计并制造高精度的镗头。
PDC cutter size, back rake and density are very important design parameters affecting the performance of PDC bit.
PD C切削齿尺寸、后倾角和布齿密度是影响PD C钻头性能的重要设计参数。
This paper presents the process of modular turning using in our country, the design of cutter structure, the material selection of inserts and the practical application.
介绍了模块式车刀在国产化过程中刀具结构的确定，刀片材质的选择及其实际应用。
According to the normal design method the former involute spline gear shaper cutter often has different size of its tooth top and tooth root.
按常规方法设计的大压力角渐开线花键插齿刀，常出现刀具齿顶宽太小和齿根槽太窄的问题。
A series of formulae on penetration depth of linear shaped charge and the calculation method on design coefficient of linear shaped cutter are provided.
提供了一套线性聚能装药侵彻深度计算公式及线性聚能切割器设计参数计算方法。
The design method is inefficient, takes much time, and requires highly of designers, and can only design a preshaving pinion-shaped cutter every calculation.
设计效率低，周期长、计算量相当大，对设计者的要求也较高，而且设计精度也不能很好的保证。
The design method is inefficient, takes much time, and requires highly of designers, and can only design a preshaving pinion-shaped cutter every calculation.
设计效率低，周期长、计算量相当大，对设计者的要求也较高，而且设计精度也不能很好的保证。
应用推荐