Deformation will be concerted of the fourth weak interbed exceptant bank slope rock mass and weak interbed will be potential, the most dangerous failure plane.
第四层软弱夹层以外的岸坡岩体变形较协调，这一软弱夹层是岸坡潜在的最危险的破坏面；
It is found that lateral deformation exists, which implies the condition of plane strain does not fulfill.
试验表明沿滚轮和轨道的侧向存在变形，不满足平面应变问题的条件。
Meanwhile, by temporal analysis method, the author calculates the relationship between T-type and L-type torsion and local deformation of plane irregular house structure arrangement.
同时用时程分析方法，计算分析了T型、L型平面非规则布置房屋结构的扭转和局部变形的关系。
The analysis of simulated result of the deformation of symmetrical plane proved that the simplified model is reasonable and feasible.
对模拟结果的对称面变形的情况分析论证了模型简化的合理性和正确性。
Tranagranular cracks result from deformation damage of grain, and its propagation mechanism is shear rupture along slip plane.
穿晶裂纹源于晶内形变损伤区，其扩展机制为沿滑移面的剪切断裂。
Objective To establish the plane strain model of brain tissues on mid-sagittal plane and discuss the relation between the brain tissue deformation and brain injury.
目的建立人体正中矢状平面头部组织的平面应变模型，探讨脑组织变形与大脑损伤间的关系。
The effect of the whisker rotation on the hot compressive deformation behavior of the whisker reinforced aluminum matrix composite is investigated by the plane strain finite element method.
采用平面应变有限元方法研究了晶须转动对晶须增强铝基复合材料热压缩变形行为的影响。
Plane warping deformation and interior hole oval deformation occur easily for spread bevel gear at carburization and hardening.
螺旋伞齿轮在渗碳淬火时极易发生平面翘曲变形和内孔椭圆化变形。
By using the hypothesis of the deformation of the straight bar and beam in mechanics of materials, a new engineering calculating model for a linear inclusion in plane is presented.
使用材料力学的直杆和梁的变形假定，对平面线夹杂问题提出一种新的工程计算模型。
Large samples uniaxial compressive creep test indicates, the flow deformation and failure of SLATE is controlled by its structure plane.
大试件单轴蠕变实验表明，板岩流动变形破坏受结构面控制。
The computation of stress resulted by external load is relatively complex because the deformation of unbonded prestressed strand cannot comply with the plane section assumption.
无粘结筋的变形不符合平截面变形假定，因此由外荷载引起的应力计算比较复杂。
The processing results show that the plane mirror still has enough stiffness even if its lightening ratio is as high as 44.5%, and there is no deformation that will affect processing accuracy.
加工结果表明，该镜的减重比达44.5%，但仍具有足够的刚度，且没有影响加工精度的变形。
The two-dimension plane model and the simplification of dynamic loading are applied to create the finite element model for asphalt pavement permanent deformation analysis.
采用二维平面模型，“以静代动”的荷载简化方法，建立沥青路面永久变形有限元分析模型。
The finite deformation theory and the Nakai's sub-loading constitutive model are used to investigate shear band localization in plane strain model tests.
基于有限变形理论和中井的下负荷面本构关系模型，研究了平面应变试验中黏土试样变形的局部化问题。
When milling horizontally middle plane, by applying milling force to bearing end and steam guidance end, simulation results showed no excessive deformation arose.
对于铣削力引起的加工变形，在加工水平中分面时，将铣削力分别施加到轴承端和导流端，仿真结果显示，铣削力不会引起过大变形；
By the theory of elastoplastic bend, this paper prowents a method to calculate out - of -- plane restraint and reverse deformation that are made use of to remove angle deformation in butt joints.
本文应用弹塑性弯曲理论提出了一种消除焊接对接接头角变形的平面外拘束力的计算方法，计算了极限拘束力、拘束长度和反变形的量值，并通过试验验证了方法的有效性。
The FEM elastic simulation results of plane strain show that the deformation and stress distribution of this structure are safe and accord with the relevant standard of highway tunnel.
平面应变弹性数值模拟分析结果表明：该结构的变形与受力是合理的，在安全上均能满足相关技术规范。
Based on the first-order shear deformation plate theory, axisymmetric governing buckling equations are derived for a functionally graded material circular plate subjected to in-plane pressure.
基于一阶剪切变形板理论，推导了功能梯度材料圆形板在边界面内均布压力作用下的轴对称屈曲方程。
By means of the improved setup, the slope and curvature measurement of out-plane deformation is realized.
利用这一改进光路实现了离面变形的斜率和曲率测量。
The effect of in-plane bending deformation on the lateral_torsional buckling of beam_columns is considered and the effect form, the additional moment factor, is obtained.
得出了平面内弯曲变形对压弯构件弯扭屈曲的影响形式，这一形式可用统一的弯矩附加系数表达。
Technique issues such as clamping deformation, guarantee of hole position accuracy and plane seal, etc. for motorcycle case body and case cover are introduced.
介绍了摩托车箱体、盖加工中的装夹变形、位置精度和平面密封保证等方面的工艺问题。
It is one of the effective methods for detecting position of slip plane, measuring thickness of slidebody, finding slip direction, calculating slipspeed and judging deep deformation case of slidebody.
是测定滑坡体滑动面（带）位置、滑体厚度、滑动方向、滑速及判断滑体深部变形状态行之有效的方法之一。
The modified method can better reflect the effect of the size of the base plane on the deformation of the retaining structure.
研究发现，改进法得到的支护结构水平变形大于传统方法，而对内力结果影响不大；
The sheet metal forming processes under in-plane deformation were simulated by using finite element method based on a coupled elastoplasticity with damage constitutive laws.
基于金属板材塑性变形的损伤本构关系，运用有限元数值法分析了金属薄板的面内成形过程。
The trend of river bed deformation calculated by a plane 2-D numerical model of total sediment transport is in good agreement with the real conditions.
通过选择有关参数，处理工程边界以及进口边界条件，用二维河道全沙数学模型计算所得的河床变形趋势与实测情况基本一致。
The result of test of plane stability is analyzed as well when the expansion joint bellows are subjected to internal pressure and internal pressure together with compression deformation.
文中同时分析了压力及内压与压缩位移一齐作用时的平面稳定性试验结果。
Relationship between internal force and deformation of steel plane member considering cumulative damage effect under earthquake;
采用弹性地基梁有限元模型，分析了坑内土体加固对围护结构变形和内力的影响。
The snow and ground I modeled by using a plane to which I applied extrude and deformed it using 3DS Max Paint deformation tool.
雪景和地板建模我用平面挤压出立体，并用绘制变形工具对其进行变形。
The dynamic deformation and the energy absorption mechanism of cells with different geometrical topology under in-plane impact loading have been studied.
研究了面内冲击载荷作用下不同形状单胞的动态变形机制及能量吸收特性。
The dynamic deformation and the energy absorption mechanism of cells with different geometrical topology under in-plane impact loading have been studied.
研究了面内冲击载荷作用下不同形状单胞的动态变形机制及能量吸收特性。
应用推荐