The peak value of the shock force is the key factor in the micro laser peen forming. The deformation increases as the peak force increases.
激光冲击的峰值压力是箔材变形的主要因素，随峰值压力的提高，变形量增大；
The deformation increases quantity of island structure in the product of medium temperature transformation in austenite and makes it finer.
形变使奥氏体中温转变产物岛状组织数量增加，并使之细化。
The experimental results also show that minimum energy calculation accords with critical value of deformation, and the deformation increases with the increase of laser energy in a nonlinear way.
实验结果表明估算的最小激光能量与板料变形所需的能量阈值基本一致，且板料变形量随激光能量的增加呈非线性增大。
The deformation significantly increases electron mobility, making it possible to boost computer speed and reduce energy consumption.
形变使电子的迁移率增大，从而可能提高电脑的速度以及降低功耗。
The system increases the bearing capacity of concrete, reducing its deformation and cracking decreases, thus increasing its life.
该系统增加了混凝土的承载力，这样既减少其变形和开裂，也增加了混凝土的使用寿命。
The deep roadway deformation problem is becoming increasingly serious, much maintenance increases support costs and security is difficult to guarantee.
大采深巷道变形问题日益严重，巷道需要多次维修增加支护成本、安全难以保证。
During the isothermal constant strain rate compression process, the effect of deformation heating on flow stress increases with increasing equivalent strain rate.
在等温恒应变速率压缩过程中，随着等效应变速率的增大，变形热效应对流动应力的影响程度增大。
Many that remain are poorly preserved because the probability of destructive deformation or metamorphism increases with age.
由于变形或变质作用随时间增加概率大大增加，许多现存的遗迹状况欠佳。
The deformation bands change into the transformation bands in microstructure as the cutting speed increases.
随着切削速度的提高，绝热剪切带的显微组织发生了由形变带向转变带的演变。
With the decreases of deformation temperature and increases of deformation degree and deformation rate, the recrystallized grain size decreases and the recrystallization volume percent increases.
随着变形温度的降低、变形程度和变形速率的增大，再结晶晶粒尺寸减小，再结晶体积分数增大。
The dynamically recrystallized grain size increases with increasing deformation temperature and reduces with increasing strain rate.
动态再结晶晶粒尺寸随着变形温度的升高而增大，随着应变速率的升高而减小。
After being set state load, optimized timbering adds support yielding deformation, increases the load-carrying ability and improves the effect of controlling the surrounding rock.
在给定初始支撑强度的前提下，加大支架的让压变形量，提高支架承载能力，大大改善了矿工钢梯形支架控制围岩的效果。
Subjected to the compression deformation, the hardness of the alloy increases significantly.
经过压缩变形后，试样硬度明显提高。
The results show that: with the initial principal stress direction angle increases, the axial residual deformation from the compression state gradually transits to the elongation.
结果表明：随着初始主应力方向角的增大，轴向残余变形由压缩状态的正值逐渐过渡到伸长状态的负值。
Sand pile reinforcement increases the consolidating speed and confine the lateral deformation and consistently decrease the lateral displacement of soft ground.
砂桩加固处理加快了软土层的固结速率，起到了限制侧向变形的作用，减小了软基的侧向位移。
The new process increases the strain rate and deformation, which makes metal particle flow uniformly, and that obtains satisfactory shape of the strip.
同时，由于采用新工艺而使变形速度提高，变形量加大，使得金属质点均匀流动而获得满意的板形。
Any mechanical operation that creates permanent deformation, such as bending, rolling, drawing, etc. performed at room temperature that increases the hardness and strength of the stainless steel.
引起材料永久变形的机械操作，如弯曲、辗制、拔制等。在室温下操作，提高不锈钢的硬度及强度。
Die stress analysis results show that the deformation of the die core increases with welding chamber height. For the stress distribution, there exists a best welding chamber height.
模具变形分析结果表明，随着焊合室深度增加，模芯变形程度增大，对应力分布来说，存在一个最佳的焊合室深度。
With the increase of deformation temperature, thick second phase reduces, the strength of T6 alloy increases, but plastic decreases first and then increases.
变形温度升高，合金中的粗大第二相减少，T6态铝合金强度随变形温度的升高而增大，塑性则先降低后增加。
And the more the deformation degree increases, the more the grains of dynamic recrystallization.
且随变形程度的增大，动态再结晶晶粒越来越多。
The deformation moves CCT curve to left and up direction. the cooling transformation initiating temperature of austenite increases more with the increase of cooling rate.
变形使CCT曲线向左上方移动，提高了奥氏体冷却转变开始温度，随冷速加大提高得越多。
The leukocyte and the nucleus will not deform infinitely when the Reynolds number increases beyound a certain value where the deformation index reaches its maximum;
当雷诺数增大到一定值时，细胞和细胞核都不能进一步变形，变形指数达到峰值；
The results show that the activation energy of deformation is connected with deformation condition, and it increases with the increase of strain rate.
结果表明：形变激活能与变形条件相关，随着应变速率的增加而增加；
A higher pressure of the inlet fluid will result in the increases of thermo-elastic deformation and the balancing film thickness.
流体注入压力越高，热弹变形量越大，密封端面平衡间隙亦越大。
The interfacial slip reduces the stiffness, increases deformation and influences performance of composite beams of steel and concrete.
得到各种情况下组合梁界面滑移分布曲线及弯矩-挠度曲线，分析其变形性能。
The strain rate sensitivity exponent increases little with increasing deformation temperature.
随着变形温度的提高，该合金的应变速率敏感指数值变化很小。
The test shows that the chemical grouting not only increases the bearing capacity of the loess ground, but also strengthens capacity of anti-liquefaction and anti-deformation.
试验结果表明，化学灌浆不仅提高了黄土地基的承载能力，而且增强了抗液化能力及抗变形能力。
The result of magnetic measurement shows that the amount of deformation-induced martensite increases with the increasing of plastic strain.
在小变形条件下，变形速率对形变马氏体的生成量影响较小；
The result of magnetic measurement shows that the amount of deformation-induced martensite increases with the increasing of plastic strain.
在小变形条件下，变形速率对形变马氏体的生成量影响较小；
应用推荐