The hyperelastic deformation behavior of the fiber reinforced polymer is studied.
研究了纤维树脂基复合材料超弹性变形行为。
However, the elastic deformation behavior of nanotubes is not affected by the strain rate.
然而，应变率对纳米管的弹性变形没有影响。
The deformation behavior of composite wall to resist horizontal load is analyzed in this paper.
对组合墙体抵抗水平剪力的变形特征进行了分析研究。
The method can reflect nonlinear deformation behavior of soil and is more close to the real situation.
该方法可以考虑土的非线性变形特性，也更符合土的实际情况。
It has been proved to be a simple model, which can represent the deformation behavior of semi-solid alloys.
该模型形式简单，能够较好地描述半固态合金的变形行为。
The thermomechanical processing and superplastic deformation behavior of 01420 alloy have been investigated.
对01420合金的形变热处理工艺和超塑性进行了研究。
The effect of residual stress on microplastic deformation behavior and microyield strength has been investigated.
本文研究了宏观残余应力对微塑性变形行为与抗力的影响。
The hot deformation behavior of a self-developed zinc based alloy was investigated by isothermal compression test.
采用等温热压缩试验对一种自行研制的高强度易切削锌基合金进行热变形行为的研究。
The effects of electric field treatment on the microstructure and deformation behavior of GH4199 superalloy were studied.
将电场处理技术应用于GH4199合金，研究电场对该合金组织和变形行为的影响。
The rigid-plastic model can be used to simulate the deformation behavior of the interface between two granular materials.
两种散粒体间的接触变形特性可通过刚塑性模型来描述。
Deformation behavior at elevated temperature of AZ31B magnesium alloy was studied systematically by processing map theory.
采用加工图理论系统分析了AZ31 b镁合金在高温变形过程中的变形行为。
The non-linearity and rate-dependence of the deformation behavior of high polymer were discussed primarily in this section.
这部分对高聚物变形行为的非线性和率相关性也进行了初步探讨。
The geometric shape, deformation behavior description, energy equation and constraint equation of the filter is constructed.
给出了过滤片的几何形状、行为描述、能量方程以及约束方程。
The settlement and deformation behavior of the soft clay subgrade are analyzed in detail before and after the opening to traffic.
详细分析了通车前和通车后软土路基的沉降变形特征。
The effects of cyclic strain amplitude history and mean strain on the cyclic deformation behavior of pure copper were investigated.
揭示了紫铜在应变循环下的循环应变幅值历史、平均应变对循环特性的影响；
The effects of the dwell time, strain rate, strain amplitude and their histories on the cyclic deformation behavior are investigated.
研究了在具有不同保持时间、不同应变率、不同应变幅值及其历史对材料的循环变形行为的影响。
Mechanical model for pile-driving is presented according to the soil deformation behavior and yielding criterion of structural soft soils.
根据结构性土体的变形特征和屈服准则，建立打桩力学模型。
Effects of SS400 steel's deformation temperature and strain rates on its deformation behavior was studied using single pass compressing test.
采用单道次压缩试验，研究了变形温度和变形速率对SS400钢热变形行为的影响。
The effect of inner corner radius on the plastic deformation behavior in equal channel angular pressing was investigated using finite element method.
运用有限元模拟的方法研究了内角半径在等径角挤压过程中的作用。
When using STCM in soft soil foundation, it is important to research the deformation behavior of soil around and seek reasonable construction process.
在软土地基中采用浅埋暗挖法进行隧道施工，研究周围土体变形行为，寻求合理施工工艺具有重要意义。
This paper studies the stress and deformation behavior of the concrete gravity dam with joints by means of mixed approach using finite element methods.
运用有限元混合法，研究了带缝重力坝的应力和变形性态。详细讨论了带缝重力坝的并缝问题，发现并缝对改善带缝坝体的受力状态效果明显。
Through analyzing the HPT process, the information of material flowage, deformation behavior and temperature distribution in the HPT process was obtained.
通过对HPT过程的有限元分析，获得了材料在HPT过程中流动信息、变形行为、温度分布等场量信息。
Experiments of 5 simply-supported steel-concrete composite beams (SCCB) with compact steel sections are conducted to investigate the deformation behavior.
对5根密实截面钢-混凝土组合梁的变形性能进行了试验研究。
The mechanical feature of soft biological tissue, in view of its deformation behavior, is concluded as a problem of nonlinearity for both material and geometry.
针对生物软组织的变形，研究了生物软组织的力学特点：既是材料的非线性，又是几何的非线性问题。
The hot deformation behavior of industrial continuous-casted duplex stainless steel 2205 under different temperature and different strain rate was investigated.
研究了工业连铸双相不锈钢2205在不同温度和应变速率下的热变形过程。
To study the deformation behavior of skin parts during the process of stretch-forming, a 1mn numerical control skin stretch forming testing system was developed.
为研究蒙皮零件在拉伸成形过程中的变形行为，自行研制开发了1MN数控蒙皮拉伸成形试验机系统。
Error analysis shows that the constructed constitutive relationship has good accuracy and can preferably describe hot deformation behavior of TB6 titanium alloy.
误差分析表明，所建的本构关系具有较好的精度，能较好地反映TB 6钛合金的热变形行为特征。
The densification and deformation behavior of porous materials during the ECAP process were investigated by (thermo -) mechanical coupling finite element method.
针对粉末多孔材料，采用体积可压缩刚粘塑性热力耦合有限元法对其等径角挤压过程进行模拟分析。
Moreover, the evolution equations of isotropic deformation resistance which has fading memory on the cyclic deformation behavior of previous history are deveopled.
还提出了对先前加载历史循环变形行为衰减记忆的各向同性变形阻力演化方程。
This paper revealed the metal deformation behavior of initial extruding stage during CONFORM process, which have certain guidance role for CONFORM project practice.
本文通过数值模拟揭示了CONFORM连续挤压初始阶段金属的变形行为，这对于CONFORM连续挤压工程实践具有一定的指导作用。
应用推荐