Using the combined deformation analysis method, the author mache an analysis of tapered bit forced in operating.
本文采用组合变形的分析方法，对锥体连接钎头工作时进行受力分析；
Combining with the relative movement parameters, a deformation analysis method of successive approximations is presented.
结合相对运动参数，提出了一种逐渐趋近的变形分析方法。
In this paper, on the basis of several discontinuous deformation analysis methods, DDA (discontinuous deformation analysis) method was researched mainly.
本文在对各种非连续变形分析方法进行比较性介绍的基础上，选择其中的DDA方法进行了着重研究。
For the construction process of twice prestressed continuous beam, the stress analysis and deformation analysis method during construction stage is provided in this paper.
根据二次预应力连续梁的施工过程，提出了施工阶段的应力和变形分析方法。
Computation and analysis of the cylinder block stress and deformation are conducted on a 6125q diesel engine in supercharged or cylinder diameter enlarged situation by using the finite element method.
本文应用有限元法，对6125Q型柴油机机体在增压和扩缸时的变形和应力进行了计算分析。
But the method of its design analysis is not perfect yet, and the study on its reliability, deformation and displacement is also very poor.
但目前土钉支护结构的设计分析方法仍不够完善，对其可靠性、变形位移计算的研究也很不足。
The levee classification provides the method and basis for analysis of levee foundation seepage deformation, levee slope stability and segmented evaluation on levee engineering geology.
堤基结构分类为堤基渗透变形、堤坡稳定性分析和堤基工程地质分段评价提供了方法和依据。
Then a three-dimensional deformation inversion analysis is conducted by orthogonal design method and neural network to acquire the distribution rule of rock body ground stress field at various depths.
在此基础上，采用正交设计方法和神经网络进行了岩体地应力场三维变形反演分析，获得了岩体地应力场沿深度的分布规律。
Adopting finite element analysis method, the stress and deformation of gear coupling is analyzed, the cause of gear coupling failure is found, and the structure is optimized.
运用有限元分析方法，对齿轮联轴器进行应力、变形的分析，找出齿轮联轴器的失效原因并对它的结构设计进行了优化。
By using seismic response spectrum and time history analysis method, the structure dynamic characteristics and deformation properties of the main building and connected structure were analyzed.
本文采用地震反应谱分析和时程分析方法，分析了主体和高位连接体结构的动力特性及结构变形特点。
An equivalent stress method for the structural analysis of derrick with initial deformation is offered.
为此，采用等价应力法对有初始变形的井架进行结构分析。
By using seismic response spectrum and time history analysis method, the structure dynamic characteristics and deformation properties of main - building and connected structure are analyzed.
本文采用地震反应谱分析和时程分析方法，分析了主体和高位连接体结构的动力特性，结构变形特点。
Adopting linear and nonlinear bearing model, this paper analyses the deformation and stress of bearing with large radius, basing on nonlinear finite element analysis method.
基于非线性有限元分析方法，采用了线性轴承模型和非线性轴承模型分析了大型四点接触球轴承的变形和受力。
An approach for modeling rock crack propagation using discontinuous deformation analysis (DDA) method is presented.
提出一种用非连续变形分析方法模拟岩石裂纹扩展的方法。
Abstract: the method of fast finite element analysis of sheet metal forming based on deformation theory was explored, and the computer program was implemented.
文摘：研究了基于形变理论的金属板料成形快速有限元分析的方法——反向方法，并实现了计算程序。
Meanwhile, by temporal analysis method, the author calculates the relationship between T-type and L-type torsion and local deformation of plane irregular house structure arrangement.
同时用时程分析方法，计算分析了T型、L型平面非规则布置房屋结构的扭转和局部变形的关系。
The theory and method of finite element analysis of sheet metal forming based on deformation theory was explored, and the computer program was implemented.
研究了基于形变理论的金属板料成形有限元分析的理论和方法，并实现了计算程序。
This article demonstrates that deformation forecast will be performed by a comprehensive method of non linear regression model combined with time series analysis.
本文将讨论综合运用非线性回归模型和时间序列分析的方法进行变形预报。
This paper builds up a dynamic analysis method for slope stability, an accelerated deformation prediction model for mid and long-term, and two modifying prediction models for temporary sliding.
此论文描述一个动态边坡稳定性分析方法，预测中长期加速变形规律。同时还包括两个改进的临时滑动预测模型。
A general practical finite element analysis model for two-dimentional elastic large deformation contact problems was established using the TL method.
用TL法分析研究，建立了二维弹性大变形接触问题的一般实用有限元分析模型。
In this paper, an engineering assessment method of elastic-plastic fracture based on finite deformation analysis of complex structures. or a modified COD -design equation, presented forward is put.
文章在有限变形分析基础上建立了对复杂结构进行弹塑性断裂评定的工程方法，用以修正COD设计曲线。
In the analysis of the point stability for deformation monitoring, especially in height displacement monitoring network, the method of mean gap is commonly used.
在变形监测点位稳定性分析中，平均间隙法是一种常用的方法，特别是在垂直位移监测网的稳定性分析中，其应用更为普遍。
The finite strip method in structural analysis has been extended, and elastic-plastic large deformation spline finite strip method based on the Updated-Lagrange method (U.
拓展了结构分析有限条法，基于固体力学有限形变理论的更新拉格朗日法（U 。
The method of plate and shall large deformation rotation analysis is used in Wangying coal mining district, Fuxin area to predict faults and fractures in coal seams.
用板壳大变形理论转动角计算方法，对阜新矿区王营井田煤层大变形断裂和破裂带进行分析和预测。
Time series analysis method is a main method by which deformation forecasting model is established in deformation measurements.
时间序列分析方法是建立变形测量预测模型的主要方法。
Considering the limitation of single point deformation analysis, the contour method for integral deformation analysis is put forward.
针对单点变形分析的局限性提出了整体变形分析的等值线法。
Following discussions on the principle of Doppler, the classification of the deformation, and analysis of signal spectrum, a continuous and rapid method for the measurement is presented.
通过对超声多普勒原理、路面变形的分类研究及测试信号谱分析的详细讨论和研究，给出了一种连续、快速检测沥青路面变形情况的方法。
Simulating the deformation of the steel plate by induction heating in Finite Element Method(FEM), including temperature analysis, stress analysis and deformation analysis.
对钢板感应加热成型进行有限元分析，包括钢板截面的温度分析，应力分析，变形分析等。
Simulating the deformation of the steel plate by induction heating in Finite Element Method(FEM), including temperature analysis, stress analysis and deformation analysis.
对钢板感应加热成型进行有限元分析，包括钢板截面的温度分析，应力分析，变形分析等。
应用推荐