It is especially suitable for projects of high-grade protected surrounding buildings and strict deformation-control foundation pit.
对周边建筑物保护等级较高、基坑变形控制较严的工程尤为适宜。
Three control modes have been worked out, such as time-control, deformation-control and power-peak control. Each model realizes automatic control in linear friction welding.
采用时间控制、变形量控制和功率峰值控制三种控制方式实现了焊接过程的自动控制。
The article studies on the questions in soil nail support of the weak foundation pit and puts forward countermeasures from the construction measures and deformation-control measures.
文章从软土层基坑应用土钉支护措施存在的问题出发，从施工技术措施和控制变形措施两个方面着手，研究了软土层基坑应用坑支护存在的问题和对策。
A shaping and cooling technology is introduced to reduce or control the shell deformation.
还介绍了改善及控制炉壳变形的整形技术和冷却技术。
This paper describes the methods of controlling the frame quality in terms of process design, mould design, control of deformation and defects from welding surface treatment, etc.
从工艺设计、胎具设计、控制焊接变形和缺陷、表面处理等各环节实行严格的品质控制，多年来生产出多种型号的车架全部为合格品。
It is pointed out that the design of foundation engineering should be transformed from strength control to deformation control to meet the requirements by environment protection.
基坑工程的设计应该从强度控制设计向变形控制设计的转变，才能满足日益严格的环境要求。
Reliable, high-quality raw output; the complete structure and control design, raw materials, to prevent caking, deformation of material.
可靠、高品质的原料输出；完备的结构及控制设计，防止原料结块、变形；
Settlement deformation control about high fill becomes one of the most important problems for design.
高填方的沉降变形控制已成为高填方设计中面临的最重要课题之一。
In this bode, onsite welding and deformation control of the large pipe and barrel structures have been deeply analyzed, which is very useful for theory and practice.
本文重点对大型管、简构件的现场焊接及变形控制做了深入的分析和探讨，具有较强的理论意义和实际应用推广价值。
Anchor concreting is an effective support technique to control surrounding rock deformation and keep tunnel stability.
锚杆注浆是一种行之有效的控制围岩变形和保证巷道稳定的支护技术。
What we have done here provides developing calculation model for the force-deformation calculation and process control of PARS during construction.
为桩锚支护结构施工进程中受力变形的设计计算和过程控制提供了动态计算模型。
Now the researches of piezoelectric structure are mainly vibration control and deformation control.
目前，对压电结构的研究主要集中在振动控制和变形控制。
Fabrication technology and deformation control measures, which can meet requirements of specifications without need of corrections after welding, for the steel box members are expounded.
本文介绍了该钢箱杆件的制造工艺及不需焊后矫正就能达到规范要求的变形控制措施。
For the concrete faced rockfill dam, the deformation control is the key to the design and construction.
对面板堆石坝而言，坝体变形控制是设计和施工的首要问题。
Some methods used in the control of welding deformation, such as reverse deformation, system analysis, controlling process parameters and temperature field, are introduced.
同时介绍了控制焊接变形的几种方法，如反变形法、控制工艺参数、控制温度场以及系统综合分析等。
And that jointing deformation is the main component factor of it, so it must attach importance to jointing deformation, the simulation and control of jointing deformation deserves researching.
而焊接变形是高层钢结构框架变形的主要构成因素，所以必须给予高度重视，焊接变形的模拟和控制很值得研究。
How to achieve efficient and intuitive deformation control is the important topic in space deformation research.
如何实现高效、直观的变形控制则是人们一直关注的焦点。
Describing the factors affecting welding spares deformation, deformable harm to the spares and methods to control deformation in the manufacture of valve industry.
论述了阀门工业生产中，影响焊接零件变形的因素，变形对零件的危害，以及控制变形的方法。
According to theoretic value, some measurements for stress and deformation are adopted to control internal force and figure in a reasonable range.
应力和变形控制中，以理论值为指导，采取各种监测手段，使结构的内力和线形控制在合理范围之内。
The dimension instability is caused by aluminium alloy deformation. The methods such as heat treatment and assembly to control the inspection device deformation are put forward.
对于铝合金检具变形引起的尺寸不稳定，给予规范的热处理和粘接装配，使发动机缸体用检具本体变形得到控制。
The result indicates that the prestressed anchor flexible retaining method can control deformation more effectively for the strict deformation requisition.
结果表明：对变形要求严格时使用该种预应力锚杆柔性支护可以更有效地控制变形。
Based on the monitor information of deep excavation, prediction of deformation, deformation control measures and the finite element computation are carried on.
本文基于该基坑工程开挖施工的监测信息数据，进行变形预测、变形控制和有限元计算。
However, oversize deformation would induce safely problem, so deformation control should be considered during design and construction.
但变形过大时，会导致安全问题，设计和施工中应考虑变形控制。
The author thinks that the system of deformation control design for retaining structure in deep excavation is a fuzzy system actually.
作者认为深基坑支护结构变形控制系统实际上是一个模糊系统。
It is helpful for explaining the mechanism of the deformation control in roadway by grouting reinforcement in surrounding rock.
试验结果有助于解释围岩注浆加固控制巷道变形的机理。
The result show that after the adjustment construction parameter deformation of the support in deep foundation pit tends to stably, achieves the deformation control the goal.
计算结果表明，调整施工参数后，基坑变形发展趋势趋于稳定，达到变形控制的目的。
The deformation control and suitable joint plan are the key to improve the stress behavior of the concrete face and are also the key to avoid or reduce the rupture of the concrete face.
采取合理的坝体变形控制措施，合理的分缝和结构型式是改善超高混凝土面板堆石坝面板应力状态，避免或减少面板产生结构性裂缝的关键所在。
Researched the vertical deformation and lateral one including linear and nonlinear theoretical models, the paper established corresponding deformation control models.
研究了高墩大跨径曲线连续刚构桥的竖向变形理论模型和侧向线性、非线性变形理论模型，建立了相应的变形控制模型。
In this paper, main methods about thermal deformation control of present machine tools are presented, they are thermal optimization, thermal monitoring and thermal compensation.
阐述了目前机床结构热变形控制的主要对策：热优化、热温控、热补偿研究现状。
Results indicate that the bolt-grouting support helps to increase the strength and bearing capacity of the surrounding rock and to control its deformation effectively.
结果表明，辅助锚注支护显著提高了围岩的强度和承载能力，有效地控制了深部极软岩巷道的围岩变形。
应用推荐