The results show that the approximate decoupling method can be applied in certain cases.
研究结果表明：近似解耦方法有一定的适用性。
An unsymmetrical numerical decoupling method is presented and the actual wave velocity is introduced.
提出采取实际不对称数值解耦的方法并引进实际模量波速。
The effect of non-classical damping of isolated bridges and applicability of approximate decoupling method.
非经典阻尼对减隔震连续梁桥地震响应的影响与强迫解耦适用范围研究。
A quite equivalent decoupling method based on branch node for fault location in distribution network is presented.
提出了一种按分支节点完全等效解耦的配电网故障定位新方法。
This paper tries to seek an approximate decoupling method in the time-domain framework. It is called as an energy decoupling method.
本文试图在时域范围内寻找一种近似解耦方法，称之为输入-输出能量解耦方法。
In this paper, local decoupling method is put forward to simplify the scale of optimization problem and to reduce its searching scope.
研究提出局部脱耦方法用以简化问题规模、缩小搜索空间，选择特征统计算法进行优化方案的搜索。
The key problem is that the decoupling method and the harmonious control should be studied in the missile flight simulator system control.
所以，在大系统控制中，首要问题是研究解耦方法和协调控制。
The least square theory-based static linear decoupling method is studied, and a new static decoupling method based on BP artificial neural network is proposed.
在研究基于最小二乘理论的多维力传感器静态线性解耦方法的同时，提出了一种基于BP神经网络的静态非线性解耦方法。
A kind of decoupling method based on DMC predictive control is proposed for two variables control of temperature and liquid level in the cold-hot water mixer system.
提出了一种基于DMC预测控制的解耦方法用于冷热水混合系统的液位和温度的双变量控制。
Based on the analyzing of coupling property, the design steps of cascade compensation decoupling method are proposed. The structure to realize fuzzy decoupling is given.
本文在分析耦合特性的基础上，绐出了串联补偿解耦方法的设计步骤和实现模糊解耦的控制系统结构。
The stator's characteristics of vibration and input impedance were analyzed by using the finite element software ANSYS. A new decoupling method between the two vibrators was presented.
对电机的运行机理进行了分析，并利用有限元软件ANSYS分析了电机定子的振动特性和阻抗特性，同时提出了一种振子间解耦的方法。
As a traditional design concept for service system the front-back stage decoupling method has been re-recognized and applied into wide range of industries and achieved great successes.
前后台分离作为一种传统的服务系统设计理念在近年来引起了新一轮的广泛重视和得到新的应用并取得了巨大的成功，而且为越来越多的行业所接受和推崇。
On the basis of orthorhombic techniques, a computational decoupling method which can be used in the active control analysis of unrestricted elastic structures is brought forward in this paper.
在正交化技术的基础上，本文提出了一种适合于无约束弹性结构主动控制分析的计算解耦方法。
According to the demands of ball mill coal pulverized system, inverse matrix decoupling theory, a traditional decoupling method, is used in the system control, and a PID controller is designed.
本文首先根据中储式球磨机制粉系统对控制精度要求不高的特点，将传统解耦方法中的逆矩阵方法应用于制粉系统解耦中，设计了基于逆矩阵静态解耦的PID控制系统。
Flight control system designed by this nonlinear control method can achieve decoupling control, and has better adaptability to inaccurateness of model and the change of system parameters.
用该非线性控制方法设计的飞行控制系统不仅能够实现动态解耦控制，获得良好的动态性能，而且对模型不够准确或系统内部参数发生变化具有较强的适应性。
So, on the basis of decoupling, disturbance observer is designed to proceed compensation. This method is applicable for the practical engineering application.
因此，本文在解耦的基础上设计了干扰观测器进行补偿，这种方法易于应用到实际工程中。
In view of strong coupling system, a kind of simple internal model decoupling control designing method is presented.
针对多变量强耦合的被控系统，提出了一种简化的内模解耦控制设计方法。
Practice proves this method can implement decoupling of steel shape and plate thickness, meets the requirements of steel plate quality, with excellent robustness.
实际运用表明，该方法能够实现板形板厚的解耦，满足板带质量控制要求并具有良好的鲁棒性。
According to the characters of Dynamic Inversion method in making multivariable control system decoupling, we design a set of control law for every direct lift control mode.
本文针对动态逆控制方法的不足之处提出了相应的改善措施，并取得了较为理想的效果。
At last the article proposes the designing strategy of board-level power distribution system, analyze the principle of decoupling, the method of choosing decoupling capacitors and their PCB designing.
文章最后提出了板级电源分配系统的设计策略，详细分析了去耦电容的原理，并介绍了去耦电容选取原则和PC B设计方法。
In this Paper, decoupling design for non-square multivariable systems using inverse Nyquist array (INA) method is discussed.
本文讨论了用逆奈氏阵列法对一类非方阵多变量系统进行解耦设计。
For nonlinear attitude system of flying vehicle with pure time-delay, inertia and bang-bang control a control method using decoupling variable structure is given.
对于具有纯延迟、惯性和由开关控制的非线性飞行器姿态系统，本文提出了采用解耦变结构控制的方法。
Traditional decoupling controlling comprehensive method is quit dependent on mathematical model of coupling object, so its application is limited in industry control field.
传统的解耦控制综合方法，对耦合对象的数学模型依赖性较大，因此限制了它在工业领域内的应用。
This paper deals with the decoupling of multivariable control systems and presents a simple method to design dynamic compensator matrix.
本文讨论了多变量系统的解耦问题，给出了一种简便的解耦补偿矩阵的设计方法。
Based on the decoupling of fundamental power flow and harmonic power flow, a separate iteration method for calculating three-phase asymmetrical harmonic power flow in power system is presented.
以基波潮流和谐波潮流的解耦性为基础，提出了一种将电力系统三相不对称基波潮流和谐波潮流分离迭代的计算方法。
The decoupling problem for a class of nonlinear MIMO time-delay systems is studied with differential geometric method.
利用微分几何方法研究了一类非线性多输入多输出时滞系统的解耦问题。
The method of fuzzy decoupling can solve the coupling problem between temperature and humidity in tobacco barn.
采用模糊解耦的方法，较好地解决了烤房中温湿度间的强耦合问题。
The method of fuzzy decoupling can solve the coupling problem between temperature and humidity in tobacco barn.
采用模糊解耦的方法，较好地解决了烤房中温湿度间的强耦合问题。
应用推荐