It is of great superiority using DCS to control the system if there is an aggregation of experience.
如果有一个这样的经验集合，用DCS来完成控制就具有很大的优越性。
DCS control system, adopting Siemens PLC controller LCD touch screen.
控制系统，采用西门子PLC控制器液晶触摸屏。
Introducing of advanced computer DCS in large-sized complicated projects can satisfy the requirement of technology control, which cannot be realized by traditional control method.
在大型、复杂的工程中引入先进的计算机集中控制系统可以解决传统控制方式无法实现的工艺控制要求。
It is character with lower cost, high reliability and good expanding and is option chose of medium and small DCS system to realize remote communication and remote control.
它成本低，可靠性高，扩展性好，是中小型DCS系统实现远程通讯和远程控制的最佳选择。
Functions of control systems are described in detail, a system structure diagram of DCS is given and developing trends of control systems are discussed.
详细介绍了控制系统的功能，并给出了DCS控制系统结构图，同时探讨了控制系统发展趋势。
In application of computer for plant, presents DCS, advanced control system and processing simulation.
工厂中的计算机应用，着重介绍了DCS，控制和流程模拟。
The paper introduce control scheme with DCS and QCS for paper machine steam and condensation in thin paper.
介绍了薄页纸机蒸汽和冷凝水系统结合DCS和Q CS进行控制方案的设计与应用。
The application of DCS in air separation system optimized its control system, and improved its automation level.
DCS的应用实现了空分系统运行的优化控制，提高了空气分离系统的自动化程度。
Starting from a new aspect, it explained a new way to realize energy saving without retrofitting DCS and control logic at site in the application of high voltage frequency conversion.
从全新的角度，诠释了高压变频在系统应用中不对DCS和现场控制逻辑改造，即可实现节能应用的一种新方法。
The comparison experiment results obtained from a nonlinear liquid system controlled by a distributed control system (DCS) show that this method retains the good performance of the conventional MGPC.
在一个由集散控制系统(DCS)控制的非线性液位装置上的对比实验结果表明，该方法保持了常规MGPC方法的优良性能。
There are different application features between PLC and DCS system in procedure control of metallurgical production.
在冶金生产控制中，PL C系统和DCS系统具有不同的应用特点。
The paper mainly introduces many kinds of interconnection manner between ESP control system and DCS in factory, and probes it's interconnection ability.
本文主要介绍了电除尘控制系统与工厂DCS系统之间的多种互连方式，并对其互连能力作了探讨。
The recoverers were environmental type apparatuses with low energy consumption and low operation cost because of realizing DCS automatic control.
该回收装置实现了DCS自动控制，运行成本低，是一种节能降耗的环保型装置。
The structural feature, hardware configuration and software etc. of DCS (JX300X) automatic control system in Guizhou Wengfu MAP plant is described.
阐述贵州瓮福磷酸一铵装置JX 300X自动控制系统的结构特点、硬件配置和软件实现等内容。
DCS control system, adopting Siemens PLC controller LCD touch screen.
DCS控制系统，采用西门子PLC控制器液晶触摸屏。
Using resource of DCS, display and control of dynamic mimic screen for industrial process are implemented.
利用DCS的资源实现工业过程动态模拟屏的显示控制。
A novel pulp washing process DCS (distributed control system) is proposed.
提出了一套新型纸浆洗涤过程DCS控制方案。
The quick development of distributed control system (DCS) provides a powerful hardware and software platform for the application of advanced control.
集散控制系统(DCS)的普及与提高为先进控制的应用提供了强有力的硬件和软件平台。
Using DCS sequence control chart, it realized the autocontrol of multi device and inside programming. It optimized techniques process, improved the automatization level of this working procedure.
使用DCS顺序控制图，通过模块组态和内部编程，实现多台设备的自动控制，优化工艺过程，提高该工序的自动化水平。
This paper presents the configuration of coal boiler DCS control system and analyzes mainly the builder loop of fuel control system.
详细介绍燃煤锅炉DCS控制系统的配置情况，并着重分析燃烧控制系统的组态回路。
This system is the part of the LNG DCS control system. According to the project requirements, this paper focuses on the core equipment controlling such as BOG compressor and BOG recondenser, .
本设计中BOG控制系统是整个LNG自控系统的一部分，由于写作需要，本文只针对BOG压缩机及BOG再冷凝器等核心设备控制功能的设计与实现进行论述。
The furnace was equipped with PLC computer control and DCS system in order to gain the best combustion.
炉子采用的PLC计算机控制及DCS系统实现最佳燃烧控制实可用靠。
This article deals with the features and application of DCS system and program control of industrial boilers.
论述了DCS系统及工业锅炉过程控制的特点，以及DCS系统在工业锅炉过程控制中的应用。
Combined with the DCS retrofitting project of unit 1 in Jiaozuo Power Plant, the DCS control is realized and the maloperation in electric system is improved.
分析防止电气误操作装置特点，结合机组DCS改造，提出了实现电气系统DCS控制与防误功能一体化解决方案。
If capability of distribution control system (DCS) was developed fully, intellectualized control of FCC can be realized and economic loss can be decreased in accident treatment.
充分开发利用DCS操作系统的功能，能够使装置控制逐步实现智能化，进而减少在处理事故过程中的经济损失。
The paper introduces an open configuration software of distributed control systems (DCS), especially describes the object oriented programming design and the techniques of control loop identification.
介绍了一种DCS开放式组态软件，并详细叙述了面向对象程序设计方法和控制回路识别技术。
The paper introduces an open configuration software of distributed control systems (DCS), especially describes the object oriented programming design and the techniques of control loop identification.
介绍了一种DCS开放式组态软件，并详细叙述了面向对象程序设计方法和控制回路识别技术。
应用推荐