Based on the technology of data fusion, a method is presented to process distributed detection parameters. This method can efficiently improve the precision of measuring result.
介绍一种采用数据融合技术对分布式检测参数进行数据处理的方法，可以有效地提高测量结果的精度。
Based on the combination of data mining and statistical process control, a mix-produced process quality control method is proposed.
将数据挖掘技术与统计过程控制技术相结合，提出了一种混合的生产过程质量控制方法。
Based on the detailed analysis of MEMS surface micromachining process, the data model of surface micromachining process was built by the process oriented method.
首先对MEMS表面加工工艺进行了详细的分析，采用面向过程的方法建立了表面工艺过程的统一模型。
This article expounded and analyzed the accordance of data when his is calling medical insurance interface, presented an effective method to control the accordance based on actual developing process.
本文阐述并分析了目前大多数HIS调用医保接口时存在的数据一致性问题，并结合本单位的实际开发过程，提出了比较有效的控制办法。
Kalman filter is a high efficient, optimal data process method, which is a real time recursive filter based on linear, non-bias and least square approach.
卡尔曼滤波，是线性、无偏、最小方差的实时递推滤波，是一种高效、优化的数据处理方法。
ARMAX model method and subspace-based state space method were used to process the flight flutter test data, and identify the flutter modal parameters of aircraft.
论文使用了现代参数辨识技术的ARMAX模型递推法和状态子空间辨识法，对飞行颤振试验数据进行处理，辨识飞机的颤振模态参数。
The author proposes a percentage method based on practical experience. The paper describes specific steps and calculation process which is helpful in processing observed data of rock pressure.
作者在实践的基础上提出了应用百分位数法求取工作阻力上限值的具体步骤和计算过程，对矿压观测数据的处理有实际参考价值。
Based on the analysis of data measurement error sources in industrial process, this paper presents a data preprocessing method which is based on pattern recognition.
在分析工业过程数据测量误差源的基础上，提出了一种基于模式聚类的数据预处理方法。
Based on the input-output data of the system, a new method to create fuzzy rules by dividing the input space was proposed and ap plied to modelling of the non-linear drying process.
基于系统的输入-输出数据，提出一种通过划分输入空间提取模糊规则的方法，并将该方法应用于建模非线性程度较高的干燥过程。
Aiming at this case, this paper USES a method of grey superior analysis based on adaptive weighted data fusion to process the sensor data.
针对这一情况，本文应用了一种基于自适应加权数据融合的灰色优势分析方法对传感器数据进行处理。
The method of constructing model based on greedy network-best competition is proposed in the process of data mining in thesis.
在数据挖掘过程中，论文提出了贪心网罗-最优竞争的挖掘模型建立方法。
The experiment design is based on event related design. The method of its data process is deconvolution.
该实验的设计基于事件相关设计，数据处理用反卷积的方法。
Online analysis process (OLAP) technology based on data warehouse is a new decision-making analysis method in decision support system (DSS).
以数据仓库为基础的在线联机分析处理(OLAP)技术是决策支持系统(DSS)中一种新的决策分析方法。
In order to construct a process assignment and planning system quickly according to the situation of an enterprise, a method for process assignment based on PDM (Product Data Management) is presented.
为了在企业广泛应用PD M系统条件下，快速构建工艺分工规划系统，提出了一种基于PD M系统的工艺分工规划设计与管理解决办法。
The paper introduced a method about data collecting and management of coal weighbridge based on CAN bus and its realizing process.
介绍了一种基于CAN总线的煤矿地磅数据采集、管理的方法及实现过程。
The dynamic process of maps based on different scales is given and the method of drawing multi-scales roadways based on a set of data.
给出了不同比例尺矿图的动态绘制过程。实现了利用一套数据进行多比例尺巷道的动态生成方法。
Take the model of laser range finder based on synchronized scanner as example, show how to use data fusion method in the process of sensor model designing to get more robust output.
以激光同步扫描测距传感器的数学模型分析为例，介绍了在传感器数学模型设计过程中采用数据融合的思想，以使得传感器的输出更加可靠的过程。
A method of grey superior analysis based on adaptive weighted data fusion is used to process the multi-sensors data.
本文应用了一种基于自适应加权数据融合的灰色优势分析方法对多传感器数据进行处理。
In this paper we put forward a Virtual Process based on Visualization of 3d Spatial Data Sets Method.
本文提出了一种基于三维数据场可视化来实现虚拟加工的方法。
The realization method and process of data communication in the construction of vehicles transmission system simulation platform are introduced, which is based on DCS and MATLAB.
介绍了在构建基于DCS与MATLAB的车辆传动系统仿真平台时，数据共享与通信的实现方法。
The research shows that the proposed approach is capable of overcoming flaws of stage-based sub-PCA modeling method as well as depending less on demands of data from process and prior knowledge.
研究表明，论文给出的方法能够克服常规多阶段PCA监控方法的缺陷，减小了对过程数据的要求和对过程先验知识的依赖。
A universal method of data reconciliation based on classifying all process variables by matrix decomposition is proposed.
基于矩阵分解方法对过程变量进行分类，提出了一种广泛适用的数据协调算法。
In order to obtain better shock wave experimental data in 2-d cascade, a novel method for parameter measurement and analysis is proposed based on digital image process technology.
为了更好地获取平面叶栅流场试验中的激波数据，提出了基于数字图像处理技术的参数测量与分析方法。
Finally, the design realized DaQing oil-field electric power wireless meter reading system based on GPRS and the process method and result of meter reading data.
最后，设计实现了基于GPRS的大庆油田电力无线抄表系统及抄表数据的处理方法和结果。
First, it studies system integration mechanism based on data-integration-platform. Then it provides the basic framework and development process of template-based method.
首先研究了基于数据集成平台的系统集成模式，然后给出了模板法的基本框架和开发步骤。
Based on the spectral feature neighborhood, this paper proposes a tolerant rough set classification method to handle the uncertainty in the process of satellite remote sensing data classification.
结合粗糙集理论和遥感数据中地物光谱特征空间分布信息，提出了一种基于光谱特征邻域的容差粗糙集分类方法，用来处理卫星遥感数据分类中的不确定性问题。
Based on the spectral feature neighborhood, this paper proposes a tolerant rough set classification method to handle the uncertainty in the process of satellite remote sensing data classification.
结合粗糙集理论和遥感数据中地物光谱特征空间分布信息，提出了一种基于光谱特征邻域的容差粗糙集分类方法，用来处理卫星遥感数据分类中的不确定性问题。
应用推荐