The system collects coplanarity data of the sensor by a data acquisition card.
同时通过数据采集卡读取激光感应器所返回的平面度数据。
The data acquisition is realized by a data acquisition card in ISA expanded slot.
利用ISA扩展槽数据采集卡进行数据采集。
The system controls PCI data acquisition card to output the needed driving signals.
该系统控制pci数据采集卡输出驱动信号。
Conclusion the data acquisition card could meet the needs of clinical detection of exercise ECG.
结论该数据采集卡能够满足运动心电图临床检测的要求。
This paper introduces PCI data acquisition card and its application in the development of medical instruments.
本文介绍PCI数据采集卡及其在医疗仪器开发中的应用。
Data acquisition card USES DSP technology and PCI bus architecture, and it can collect and process data in real time.
数据采集卡采用了DSP数字信号处理器和PCI总线技术，能实时采集数据。
The key problems when designing a raster ruler data acquisition card were pulses frequency multiplication and counting.
设计光栅计数卡的关键问题是对光栅脉冲进行倍频以及对倍频后的脉冲进行计数。
The use of notebook PC and USB data acquisition card makes it convenient for carrying and adapt to engineering test spot.
笔记本式电脑和USB数据采集卡的使用则使系统携带方便，适用于工程现场测试。
After analyzing the working principles and features of PCI protocol chip, we design a higher speed data acquisition card.
在对PCI协议芯片工作过和应用特点进行深入分析的基础上，设计出基于PCI总线的数据采集卡。
The system is composed of programmable power, test circuit, signal sampler, signal conditioner and data acquisition card.
系统由程控电源、测试回路、信号采样、调理电路和数据采集接口卡等部分组成。
In TD-SCDMA network analyzer, E1 data acquisition card is one of the most important acquisition CARDS for testing core-network.
在TD - SCDMA网络测试仪中，针对核心网测试，E1数据采集卡是最重要的采集卡之一。
A design of synchronous data acquisition card is used as core in large-scale equipments condition monitoring and fault diagnosis.
介绍了一种在大型设备状态监测和故障诊断系统中作为核心的同步数据采集卡的设计方法。
In addition, sampling amount and speed can be increased by utilizing a high-speed data acquisition card in the industrial computer.
另外，利用工业计算机中的高速数据采集卡可以提高采样数量和速度。
This paper develops a real-time control system through Data Acquisition Card connecting the PC and the magnetic levitation ball system.
本文通过数据采集卡将磁悬浮试验平台与PC机相连，构成了磁悬浮实时控制系统。
All signals were gathered by the PCI data acquisition card, and information of each way was analyzed and displayed with virtual instrument.
经pci数据采集卡采集各路信号后，利用虚拟仪器对各路信息进行分析并显示。
Individual use of a data acquisition card, front panel to complete all the data acquisition and playback features, a good general performance.
单独使用一个数采卡，即可完成前面板的所有数据采集与回放功能，具有很好的通用性能。
The control module of the radar data acquisition card is implemented by using of the ISP technology of CPLD and the VHDL programming technology.
在实际的研制过程中，利用CPLD的在系统可编程（ISP）技术和基于VHDL 语言的可编程逻辑器件设计技术实现了雷达数据采集卡的控制模块。
After adopting these measures, Data Acquisition card can acquire the transient outside signals and transmit them to the computer with fast speed.
采取这些措施后，采集卡即可将转眼即逝的外界信号采集并迅速转移到计算机中来。
The measure and control system is composed of sensors, executive devices. data acquisition card, industry control computer and analysis software.
直线电机和电磁铁试验台测控系统由传感器、执行器、数据采集板卡、工业控制计算机及数据采集和分析处理软件组成。
This Paper introduces the PCL-812PG multi-function data acquisition card and its principle. Theapplication is discussed in the temperature controlling.
介绍了PCL- 812 PG数据采集卡及其原理，并讨论了其在温度控制中的应用。
Data acquisition card is the AD interface card, which converts the analogy signal to the digital signal, and transfers the digital signal to the computer.
数据采集卡是一种把外界模拟信号转换成数字信号，并把数字信号输入到计算机系统的一种AD接口卡。
Its core is a microcomputer in which a data acquisition card is installed. The system can perform noise measurement by using hardware resources of computer.
该系统以声级计和微机为核心，装上由信号调理和模数转换两部分组成的数据采集卡，完成对风机噪声的测量。
The second one is integrated signal acquisition device made up of sensor, front end circuit, data-showing meter, USB data acquisition card and power supply.
集成式信号采集装置包括传感器、前置器、数显表头、USB数据采集卡和供电电源；
In this thesis, I studied the selection of the pressure sensor and the displacement sensor, determined the data acquisition card and the industrial computer.
本论文以轮对压装过程为例，详细说明了压装曲线记录系统的压力传感器、位移传感器和数据采集卡及工控机等硬件选择、软件设计原理。
In the part of hardware, an experiment table of rolling bearing is designed and a high performance data acquisition card is used to acquire data at real time.
硬件部分设计滚动轴承实验台，采用高性能的数据采集卡实时采集数据。
Then, a multi-element linear transducer array system based on the high-speed data acquisition card was designed and realized photoacoustic imaging by it firstly.
其次，在高速采集卡的基础上设计研制了基于多元线性阵列探测器系统的快速光声层析成像装置，首次实现了基于多元阵列探测器的光声成像。
Data acquisition card collects data about the power output to realize a close-loop control, and protection signal of the two controllers to compute the delay time.
数据采集卡采集程控电源的输出以实现对程控电源的闭环控制，采集发电机控制器和汇流条功率控制器的保护信号以计算延时时间。
With which as the theory base, the discharge auto detecting system made of sensors, data acquisition card, virtual instrument software and computer was established.
以此为理论基础，组建了由传感器、数据采集卡、虚拟仪器软件以及计算机等组成的放电检测系统。
The hardware is made up of Data Acquisition card (DAQ) and signal conditioning extension for instrumentation (SCXI) which is composed of Hall voltage current sensor.
系统的硬件平台主要由数据采集卡和霍尔电压电流传感器构成的信号调理器组成。
The hardware is made up of Data Acquisition card (DAQ) and signal conditioning extension for instrumentation (SCXI) which is composed of Hall voltage current sensor.
系统的硬件平台主要由数据采集卡和霍尔电压电流传感器构成的信号调理器组成。
应用推荐