It is concluded that selecting a plane damper structure is more reasonable when the fuze structure allows larger increase in its area.
当引信结构允许设计较大的增阻面积时，选用简单的平面阻力器结构较为合理。
WANG Wenrui. New Vane Damper Structure Design and Suspension Performance Analysis [D]. Beijing: Beijing Institute of Technology , 2005.
[2]王文瑞。新型叶片减振器结构设计与悬挂性能分析[D] 。北京： 北京理工大学， 2005。
To solve this problem, current paper presents a different method and calculated damper structure parameters from computer simulation match experiment results quite well.
针对该计算方法存在的问题，提出了不同的计算方法，并用计算机程序计算，得出的防振锤结构参数比较接近实际试验结果。
It is thus possible to control the movement of a mass damper or adjust the stiffness of a building's structure using relatively little power.
于是，这就有可能控制一个质量阻尼器的移动或相对地利用低功率来调整建筑物结构的硬度。
The arrangement of smart damper in tall building is a very important question for structure vibration control.
在高层建筑结构振动控制中，阻尼器的配置是一个十分重要的问题。
The structure of the damper is determined, and a damping torque model is established.
确定了该阻尼器的结构，建立了阻尼器的阻尼力矩模型。
At the same time, structure parameters of SLFD are confirmed through experiments and the important gist is provided for optimal design of the damper.
同时，通过试验确定了精镗孔挤压液膜阻尼器部分结构参数，为阻尼器的优化设计提供了重要依据。
Attaching viscous damper in the upper structure can greatly reduce the possibility of overturning the building in the earthquake.
在上部结构附设粘滞性阻尼器，在地震时可以大大降低建筑物倾覆的可能性。
The viscoelastic damper reduces the dynamic amplitude of bridge structure through change the frequency and damper ratio.
粘弹性阻尼器通过改变桥梁结构的频率和阻尼比来达到减振目的。
Example of engineering calculation shows that the damper can control effectively the torsional deformation of the structure under earthquake action.
工程算例表明，阻尼器可以有效地控制结构在地震作用下的扭转变形。
The lead shear damper is a cheap device of energy dissipation that has superiority performance and simple structure.
铅剪切阻尼器是一种耗能性能优越、构造简单而又十分经济的耗能减震控制装置。
Additionally, optimization in structure design of vane MRF damper is completed by using the method of magnetic field finite element analysis, which will effectively enhance performance of damper.
采用磁场有限元分析的方法对叶片式MRF减振器的结构设计进行优化，可以有效提高减振器的性能。
The Side tuned mass damper (STMD) has been used more often in control of structure vibration, but its controllable frequency range is relatively narrow.
单频调谐质量阻尼器已被较多地用于结构振动控制中，但是它的被控频带比较窄。
The study results show that the hybrid control for the base-isolation structure with viscoelastic damper can improve efficiency of control for .
对设置粘弹性阻尼且基础隔震结构的混合振动控制问题进行了研究。
The intelligent isolation control systems consisted of ER/MR damper and isolator are studied for earthquake response of structure.
研究了ER/MR阻尼器和隔震垫组成的智能基础隔震系统对结构地震反应的半主动控制方法。
The principle and two structure schemes of vane MRF damper designed base on conventional vane hydraulic damper are presented.
介绍一种基于传统叶片式液压减振器设计的叶片式MRF减振器的工作原理，提出两种结构方案。
The damping in a viscous damper is the same as the inherent damping that is assumed as viscous damping, which is likely to make it easier and exacter analyzing a structure with added viscous dampers.
由于所附加的阻尼和传统结构分析中所假定的粘滞阻尼一致，这使得减震结构的分析有可能比较方便、精确。
According to requirement of the shimmy damper's structure and performance of a kind of helicopter rotor system, the paper presents a new kind of metal rubber-steel cable shimmy damper firstly.
参照某型直升机旋翼系统对减摆阻尼器的结构及性能的要求，首次研制了一种金属橡胶-钢丝绳索型减摆器。
It shows non-linear TMD damping-isolation technology in the super high-rise structure on the basis of research results of rubber bearing and tuned mass damper.
结合橡胶支座基础隔震和调谐质量阻尼器的研究成果，提出了在超高层结构中应用非线性＂调谐质量阻尼器＂的减震技术。
From power balance and energy balance analysis of the viscous damper set-up the structure of the energy principle.
分别从动力平衡和能量平衡的角度分析了设置粘滞阻尼器的结构的耗能原理。
The single tuned mass damper (STMD) has been used more often in control of structure vibration, but its controllable frequency range is relatively narrow.
单频调谐质量阻尼器已被较多地用于结构振动控制中，但是它的被控频带比较窄。
When the EF damper is fixed on the structure, the structural system is known as the Active Continual Variable Stiffness system (ACVS).
将其安装在结构上组成的结构体系为主动连续变刚度体系(ACVS)。
Then, the SMA damper passive control of a frame structure is simulated by ANSYS according to its relative parameter selection.
针对所提出的阻尼器及相关参数选择，利用ANSYS进行框架结构中的被动控制模拟。
The structure of the bottom bearing damper is analyzed and mechanics model is established.
文章分析了下阻尼器的结构，建立了下阻尼器的力学模型。
An output feedback variable structure controller was designed for automotive semi-active suspension with electro-rheological (er) damper.
对带有电流变智能阻尼器的汽车半主动悬架系统设计了一种输出反馈变结构控制器。
Being one kind of damping devices with good shock absorption performance and simple structure, lead damper has been used more and more in projects by engineers.
铅阻尼器是一种耗能性能良好、构造简单、制作方便的减震耗能装置，尤其是挤压型铅阻尼器和剪切型铅阻尼器，近年来逐渐得到工程界的认可和推广应用。
Structure installed with MR damper to control its vibration is widely applied, and its good control effect is proved in time-history analysis.
利用MR阻尼器进行结构振动控制已得到广泛应用，并在时程分析中证明了其良好的减振效果。
Theoretical analysis and experimental modeling of multi-ring grooves structure MR fluid damper designed by ourselves have been made in this paper.
对自行设计的、多环形槽结构磁流变阻尼器进行了理论分析与实验建模。
Theoretical analysis and experimental modeling of multi-ring grooves structure MR fluid damper designed by ourselves have been made in this paper.
对自行设计的、多环形槽结构磁流变阻尼器进行了理论分析与实验建模。
应用推荐