The theoretical distributions of the cylindrical spiral flow were simulated and calculated using the straight cylindrical model.
同时利用直圆管柱模型，模拟计算出了圆管螺旋流的理论分布结果。
This paper analyzes the pressure distribution around the stationary cylindrical Model based on the experiment using the theory of flow.
本文应用绕流理论对圆柱形煤锭模型纵向绕流的受力在实验的基础上进行了分析。
Dr Fauve's model of the Earth's core was a cylindrical tank some 50cm long filled with liquid sodium.
Fauve博士的地心模型是一个50厘米长的圆柱形容器，里面装有液态钠。
A two-dimensional mathematical model has been developed to predict the transport of mass, momentum and energy in a cylindrical combustion chamber.
本文提出了预测圆筒型加热炉燃烧室内质量、动量及能量传递的二维数学模型。
The inner earth pressure of buried cylindrical structure was measured by model test. The variations of inner earth pressure during overturning of cylinder are analyzed.
采用模型试验实测圆筒结构筒内土压力，并对圆筒在倾覆过程中筒内土压力的变化规律进行探讨。
The similarity between equivalent stress distribution around the holes in cylindrical shell and its plate model is shown through finite element analysis.
有限元分析表明，开孔圆柱壳与其相应的平板模型在开孔附近的等效应力分布非常相似。
The elastic layered half-space soil model is established in the cylindrical coordinates.
建立了柱面坐标系下分层弹性半空间地基土模型。
In the third chapter, mathematical model of size tolerance, form tolerance, orientation tolerance and location tolerance of cylindrical feature was established.
第三章：建立圆柱要素尺寸公差、形状公差、定向公差和定位公差的数学模型。
Numerical model of the cylindrical shallow shell which is consistent with experiment is constructed.
对柱面扁壳建立了与试验模型相一致的有限元数值分析模型。
In order to study how the static preloading affects on the buckling stability of columns or cylindrical shells, a simple imperfection-sensitive elastic-plastic model is used.
为了研究静力预加载荷对诸如柱、圆柱壳等结构动态稳定性的影响，采用了一种简单的缺陷敏感弹塑性模型。
By means of fluid model and linear field theory, the dispersion equation of the electromagnetic wave propagation along a cylindrical waveguide filled with an infinitely thin annular plasma.
利用等离子体流体模型和线性场理论，分别导出了无限薄环形等离子体填充圆柱波导和无限薄环形等离子体填充波纹波导中的色散关系。
To accomplish this, a finger-tip force sensor model of an underwater dexterous hand was built based on a cylindrical elastic body employing a water pressure compensation technique.
文中采用水压力补偿技术，建立了基于圆筒式测力结构的水下灵巧手末端指节的结构模型。
In this paper, a mathematical model and the selection of optimization method for equal strength optimized design of two-stage straight bevel gear-helical cylindrical gear reducer are introduced.
介绍了两级直齿圆锥—斜齿圆柱齿轮减速器等强度优化设计的数学模型及优化方法的选取。
The mathematical model of thermal process in a cylindrical lime shaft kiln with double slopes was studied.
通过数学模型的方法研究了圆筒形双斜面石灰竖窑内的热工过程。
This paper presents an acoustic structure model of free—flooded cylindrical transducer installed with holed end-caps.
提出带孔盖板的自由液浸式环氧灌注的圆柱管形换能器声学结构模型。
This study developed a view factor model to simulate the physical vapor deposition of copper interconnect in low pressure conditions using cylindrical targets.
研究开发了一个角系数模型来模拟低气压下圆柱靶溅射沉积铜连线。
The stability and wave overtopping rate of 3 kinds of revetments (sloping, big step and cylindrical structure types) are studied by using sectional model test.
利用断面物理模型试验，对3种结构形式(斜坡段、大台阶段、圆筒段)的护岸的稳定性和越浪量进行了研究。
The line source model, the simplified cylindrical source model and the two-dimensional numerical model were used to determine the thermal conductivity of underground soil.
本文用地源热泵地下换热器线热源模型、简化柱热源模型和二维瞬态数值传热模型对地下土壤导热系数分别进行了计算。
Welding deformations due to circumferential welds at the joint between the large cylindrical shell and the flange is studied by model test.
利用模型试验研究了大型圆柱形壳体与法兰对接环形焊缝的焊接变形。
The calculating field model of a earthed cylindrical silo during filling powder is presented. This model can be as a theoretical basis for calculating field distribution and safety evaluation.
提出了圆柱形接地粉体料仓灌充期间仓内电场计算模型，为计算电场分布和安全评价提供理论基础。
And its dynamic load model is proposed on the assumption that there is a virtual roller in the cylindrical roller bearing.
进而提出了圆柱滚子轴承的动态刚度模型和动态阻尼模型。
The cylindrical permanent magnet inside micro-robot was equivalent to magnetic dipole. The magnetic orientation equation based on magnetic dipole model was established.
将置于机器人内的圆柱型永磁体等效为磁偶极子，建立了基于磁偶极子模型的磁定位方程。
A numerical calculation of magnetic charge model based on cylindrical permanent's magnet magnetic field was studied.
探讨了一种基于磁荷模型的圆柱型永磁体空间磁场的数值计算方法。
In this paper, for strength analysis of cylindrical shells, model of ringed spline finite super - element is given.
提出一环状样条超级单元用于圆柱壳的分析。
The bending and shearing model in beam mode arc usually used for computation of dynamic water pressure for cylindrical storage tank.
在对贮液圆柱壳进行动水压力计算时常常仅仅采用整体弯曲和整体剪切两种计算模型。
The ground pressure distribution and the shape of failure surface by conducting model tests for the cylindrical retaining wall of a shaft in cohesionless soils are discussed.
讨论了无黏性土中圆柱型挡土墙的模型试验，给出土压力的分布和破坏面形状。
A simplified model for microwave plasma interaction in cylindrical cavity resonator is presented.
提出了一个谐振腔内微波与等离子体相互作用的简化模型。
A mathematical model is derived to describe the motion of a particle on a cylindrical rotating screen, and its simplified form is developed for practical use.
本文导出了能够较全面地描述质点在圆筒筛面上运动的数学模型，并给出便于应用的简化形式。
In this paper, the equivalent cylindrical conductor model has been proposed to calculate transient impedance of track circuits.
文中采用等效圆柱形导体模型，计算铁轨的暂态内阻抗。
In this paper, the equivalent cylindrical conductor model has been proposed to calculate transient impedance of track circuits.
文中采用等效圆柱形导体模型，计算铁轨的暂态内阻抗。
应用推荐