This research shows rock pore structures in figures with the sphere-cylinder model.
应用球管模型的分解结果实现了岩石孔隙结构的图形化再现。
The experiments on circular and elliptical cylinder model probes substantiate the theoretical results.
对于圆柱和椭圆柱样机的实验证实了理论分析的结果。
Furthermore, the cylinder model of non-homogeneous kinetics is widely applied to analyze the reaction of 'OH with DNA theoretically.
非均一动力学的柱模型被广泛地应用于OH等自由基与DNA反应的理论研究。
The pseudorapidity distributions of charged particles produced in high-energy nucleus-nucleus collisions are studied using Liu's cylinder model.
用柱模型研究了高能核-核碰撞中产生的带电粒子的赝快度分布。
An elliptical cylinder model was built to analyze the effects of cylinder liner radial deformation on the elastohydrodynamic lubrication performances of piston ring.
分析活塞环弹流润滑性能时考虑气缸套径向变形的影响是非常必要的。
In the underwater explosion tests of the cylinder model of 2003, from another view authors check the above conclusion with a set of more simple and explicit evidences.
在2003年的圆筒模型水下爆炸试验研究中，作者从另一种角度，用更加简明有力的证据，验证了上述结论。
The structure is made up of cylinder model with three-dimensional diffusion, which upper and side surfaces can meet the gas at the same time to enlarge the area with gas.
该传感器敏感膜结构由离散的微型圆柱体单元三维式扩散模型组成，模型上表面和侧面同时接触被测气体，扩大了与被测气体的接触面积。
Firstly, introduce mesh generation technology of the finite element analysis software-ANSYS and apply it to grid division of inner domain of the cylinder model and ship model.
首先，介绍了通用有限元分析软件ANSYS的网格生成技术并将其应用在圆柱模型和船体模型的内域网格的划分中。
Firstly, by improving the existing light-cylinder model based highlight-line method for surface interrogation, a new method, named light-strip model based highlight-line method, is proposed.
给出了改进的曲面品质检查高亮线方法，用光片模型取代光柱模型，解决了现有高亮线方法存在的检查结果与基准光线相关的问题。
The overlapping cylinder model(OCM) is used in this letter to describe the rapidity (or pseudorapidity) distributions of charged particles produced in nucleus-nucleus collisions at high energies.
应用重叠柱模型描述了高能核-核碰撞中带电粒子的快度（或赝快度）分布。
The utility model relates to a motive vehicle bulb socket, comprising a bulb socket cylinder, a sliding plate and a spring.
本实用新型涉及机动车新型灯泡座，它是由灯泡座筒、滑动板、弹簧组成的。
Listing 12 is a small PHP application to call searchd to extract the same results of the last command shown above (" find all parts with 'cylinder' in the name that belong to model 3 ").
清单12是一个小型PHP应用程序，用于调用searchd以得到使用上面所示的最后一条命令得到的相同结果(“在属于型号3的名称中找到含有‘cylinder’的所有零件”)。
The inner earth pressure of buried cylindrical structure was measured by model test. The variations of inner earth pressure during overturning of cylinder are analyzed.
采用模型试验实测圆筒结构筒内土压力，并对圆筒在倾覆过程中筒内土压力的变化规律进行探讨。
To analyze the cause of design error on Oscillating follower Cylinder Cam Mechanism, building the mathematics model, and affording the equation to conform to actual motion rule.
分析了摆动从动件圆柱凸轮机构误差产生原因，建立了数学模型，并给出其实际运动规律的方程。
With the numerical simulation of heavy-duty diesel engine to strengthen performance, a CAD assembly model of cylinder head bolt is built based on the thread.
结合大功率柴油机性能强化的数值计算，在考虑螺纹的基础上建立了气缸盖螺栓的CAD装配体模型；
Based on the VOIGT REUSS model, stress changes of crack phase of reinforced concrete cylinder silo was analysed in the paper.
在VOIGT-REUSS模型的基础上，建立钢筋混凝土粮食筒仓壁开裂状态下的应力应变关系。
In this paper, the principle of variable speed pump control hydraulic differential cylinder is designed, and the simulation model of system is built, and the simulation research is carried out.
给出了采用变转速泵控闭式回路控制差动缸的原理，建立了该系统的数学模型，进行了计算机数字仿真研究。
By using it, the model of equal lead on the cutter can be applied to the cylinder, cone and sphere.
通过该模型，分别建立了柱面上、球面上和锥面上球头立铣刀的等导程螺旋线的数学模型。
The combusted area is divided into several regions, and the multi area model can more truly describe the in cylinder combustion.
将已燃区按规定分成若干小区，多区模型更能真实地描述缸内的燃烧现象。
By applying fuzzy optimal design method to cylinder helix spring design, the mathematical model of fuzzy optimal design in cylinder helix spring is established.
将模糊优化方法应用于圆柱螺旋弹簧设计，建立了圆柱螺旋弹簧模糊优化设计的数学模型。
Refered the mathematical model of valve-controlled cylinder, accumulator's mathematical model without regard to its connecting line is generated in this paper.
基于阀控缸数学模型，结合管道效应理论，建立了蓄能器不考虑其连接管路的数学模型；
This paper analyses the properties of the excitation and response of an engine cylinder head system and establishes the vibration model of the cylinder head system.
对内燃机缸盖系统的振动激励及表面振动信号的特性进行分析，建立了缸盖系统的振动模型。
Based on the assumptions of small deformation and simple load, an analytical model of cylinder shallow shell is constructed, and the curve direction spring-back after trimming are given theoretically.
以矩形柱面扁壳为模型，从小变形、简单加载的前提条件出发，推导了矩形柱面扁壳切边后曲面方向回弹的理论解。
After the model and vibrate test, the cylinder was used in the satellite successfully.
在通过模态试验、振动试验等验证后，该承力筒成功地应用于某卫星上。
A entity model for the cylinder block of YC6108 diesel engine has been constructed and the modal analysis been implemented.
建立了YC 6108柴油机气缸体的实体模型，并进行了有限元模态分析。
According to geometry model characteristic of shaft and cylinder of steam turbine, a finite element method model of shaft and cylinder was set up.
根据汽轮机转子及汽缸的几何模型的特点建立了转子及汽缸的有限元模型。
One simplified mechanics model based on elastic cylinder theory and shear lag model is proposed.
在弹性圆筒理论和剪滞模型基础上提出了考虑界面相与界面层效应的力学简化模型。
The inlet and exhaust systems (including inlet and exhaust manifolds and ports of cylinder head) resistance of model 492 gasoline engine have been measured by the steady flow tests.
采用穗流试验的方法测定492汽油机进排气系统的阻力(包括进排气管和气缸盖进排气道)。
The inlet and exhaust systems (including inlet and exhaust manifolds and ports of cylinder head) resistance of model 492 gasoline engine have been measured by the steady flow tests.
采用穗流试验的方法测定492汽油机进排气系统的阻力(包括进排气管和气缸盖进排气道)。
应用推荐