The selection of the correct cutting speed has an important bearing on the economics of all metal cutting operations.
选择正确的切削速度对所有金属的切削操作有着重要的经济上的影响。
The technology has the advantages of thin kerf, increased cutting speed, good quality, elimination of hazardous waste slurry and ability to machine harder brittle and bigger dimension materials.
该技术具有切缝窄、锯切效率高、切片质量好、对环境污染小、能加工大直径工件和超硬材料等优点。
As an advanced method of fabrication, the laser cutting process has been widely used in manufacturing, for such merits as high cutting speed, high degree of accuracy, flexibility and shaping quickly.
激光切割作为一种先进的制造技术，因其具有高速度、高精度、柔性切割、异型加工、快速成形等特点而在制造行业得到广泛应用。
The software adopts continuous curve method to get faster cutting speed.
软件采用连续曲线算法，切割速度更快。
If the work piece can be always kept cooling, cutting speed is not a key factor.
如果工件始终能保持冷却，切削速度不算关键。
Increase of cutting ability or slowing down of cutting speed can reduce the kind of lag error.
增加切割能力或减缓切割速度即可减少这种滞后误差。
The influence of cutting speed and feed rate on the surface roughness of machined blade was investigated.
研究了切削速度和进给量对加工表面粗糙度的影响。
When the cutting speed is over 500 metres per second, cutting temperatures decrease rather than increase.
当切削速度超过每秒500米时，切削温度下降而不是上升。
The cutting speed can be adjusted by stepless frequency conversion to suit materials in different hardness.
切削速度可以无级变频调速，以适应不同硬度材料加工。
Results showed that the cutting seam width varied with the increase of cutting speed and laser output power.
结果显示在相同的条件下，切缝宽度随切割速度的增加而有一定的变化，随激光功率的增加而显著增加。
The deformation bands change into the transformation bands in microstructure as the cutting speed increases.
随着切削速度的提高，绝热剪切带的显微组织发生了由形变带向转变带的演变。
And that cutting speed and material hardness are two main influential factors that determine chip deformation.
切削速度和材料硬度是决定切屑变形的两个主要影响因素。
The cutting system has many advantages such as high precision, high cutting speed, good stabilization and so on.
该系统具有精度高、速度快、性能稳定等优点。
The influences of cutting speed on milling forces are presented on the basis of the high speed milling experiments.
在高速铣削试验的基础上，研究高速切削时切削速度对切削力的影响。
As the cutting speed increases, the ribbon chips transform into the sawtooth chips when a critical cutting speed is reached.
随着切削速度的提高，当切削速度达到某一临界切削速度时，带状屑转变为锯齿形切屑。
The article studies the influence of cutting speed to the cutting force in the foundation of high speed cutting experimentation.
本文在高速车削的试验基础上，研究高速车削时切削速度对切削力的影响。
The oil has high suspending rate, fine fluidity, increasing cutting speed and the crystal slice cut by the oil is easy to clean.
成品悬浮率高，流动性好，切割速度快，切后晶片易清洗。
The influence of different cutting speed and feed rate on the roughness of vane's finished surface was investigated and analyzed.
研究分析了不同的切削速度及进给量对叶轮叶片加工的表面粗糙度的影响。
In the traditional titanium alloy processing, because both cutting speed and tool life are lower, the cutting efficiency is lower.
在传统的钛合金加工中，由于切削速度低、刀具耐用度低，导致加工效率低。
Under the conditions of permission of glass processing quality, the high cutting speed and suitable external load should be selected.
在玻璃加工质量允许的条件下，玻璃制品孔加工宜选择高的切削速度、适当的外加载荷。
Factors like internode, node, cutting thickness, moisture content, cutting speed could influence the cutting force in varying degree.
竹材的节间、节部、切削厚度、含水率及切削速度等因素对切削阻力均有不同程度的影响。
The effects of cutting speed and feed on residual stress of workpiece machined should be studied to improve surface quality in machining.
在切削加工中，为了提高已加工工件的表面质量，需要研究切削速度和进给量对已加工工件残余应力的影响规律。
In order to guarantee the machining surface quality, numerical control lathe generally has constant surface cutting speed control function.
为了保证加工表面质量，数控车床一般都具有恒表面切削速度控制功能。
The advantage of laser cutting is that the operation is simple, the precision is high, the cutting speed is fast, and the efficiency is high.
激光下料的好处在于操作简单、精度高，切割快速，效率高。
The machine adopts horizontal feeding and takes linear guide rail as direction, and adopts air-liquid convertor to assure stable cutting speed.
本机采用水平锯切进给方式，直线导轨作导向，同时采用气液转换器来保证锯切速度平稳。
The results show that continuous chip is formed under relatively lower cutting speed, while serrated chip is formed under higher cutting speed.
结果表明，较低切削速度下形成连续带状切屑，而高速切削时形成锯齿形切屑。
The results show that continuous chip is formed under relatively lower cutting speed, while serrated chip is formed under higher cutting speed.
结果表明，较低切削速度下形成连续带状切屑，而高速切削时形成锯齿形切屑。
应用推荐