Structures, cutting mechanism and stress wave theory of the tunneller a re presented and analyzed.
文章对这种掘进机的结构、截割机理及应力波理论进行了介绍和分析。
Finally, design a special adjustable cutting mechanism for the robot according to its lawn trimming task.
最后，结合自动割草机器人的任务特点，为其设计了特制的割草机构。
The main structure of the cutting mechanism of the twin-shaft horizontal TMR mixer was discussed in the paper.
介绍了双轴卧式全混合日粮混合机的剪切部分主要结构。
It attains aim of comprehensively researching metal cutting mechanism with microcosm, ration, dynamic factors and so on.
达到了对金属切屑形成机理、微观、定量、动态、多项因素综合研究的目的。
Experiment study has been made on abrasive water jet (AWJ) cutting mechanism according to the demand of industrial cutting.
根据工业性切割的需要，对磨料水射流(awj)切割机制进行实验研究。
A new type of vibration cutting mechanism was presented, and the working principle was introduced, the structure was designed.
本文提出了一种新型振动截割机构，介绍了其工作原理，并对其进行了结构设计。
As a kind of complex material, the aluminum base microwave printed circuit board has a different cutting mechanism from general materials.
铝衬微波印制板作为一种复合材料，其切削机制不同于一般的金属加工。
Study of shearer cutting mechanism is a vital issue, which is important to improve productivity, reduce energy consumption and knife tooth loss.
采煤机切割机理的研究是当今非常重要的课题，对提高采煤机生产率，降低能耗，减少刀齿损耗都具有重要意义。
Pure epoxy coating shows typical brittle erosion behavior, and the erosion is determined by both micro-cutting mechanism and fracture mechanism.
环氧耐磨涂层的脆性冲蚀特征较为明显，冲蚀由显微切削机制和断裂机制等机制决定。
This paper mainly performs the research and analysis on the cutting mechanism and pressing mechanism of the cast iron horizontal continuous caster.
本文主要对铸铁水平连铸系统的切割装置和压断装置牵引运动进行了分析及研究。
Finite element simulation is an effective method to study high-speed cutting mechanism, and several key finite element techniques are studied in this paper.
有限元模拟是研究高速切削机理的有效方法，本文致力于有限元模拟所必需的关键技术研究。
The purpose of the utility model is to design a cutting mechanism; the parts of the mechanism can be manufactured easily and can be repaired easily when worn.
本实用新型的目的是设计一种切料机构，这种机构的零件制作容易，当磨损时容易修复。
The paper presented the theory and method for the ultrasonic lapping of spiral-bevel and hypoid gears and analyzed its insensitive vibration cutting mechanism.
提出了超声研磨螺旋锥齿轮的理论与方法。分析了超声研齿不灵敏性振动切削机理。
In this paper, kinematic and dynamic analysis of crank-coupler cutting mechanism of full-feeding rice combine were made, and their computing models were set up.
对全喂入水稻联合收割机切割机构进行了运动学和动力学分析，建立计算模型。
This paper tells the origin and cutting mechanism of water jet cutting technology, and introduces fundamental of getting high pressure water jet and its application.
论述了高压水射流加工技术的起源、切割机理，并介绍了获得高压水射流的基本原理和范围。
The research status at home and abroad about the cutting mechanism, the cutting in plastic region of hard and brittle materials when being sawed and grinded are summarized.
对国内外有关硬脆材料锯磨去除机理及硬脆材料塑性域锯磨的研究现状进行综述，指出了该领域有待深入研究的问题。
The paper describes the origin of cutting mechanism with water jet cutting technology, and introduces the fundamental of getting high pressure water jet and its application.
论述了高压水射流加工技术的起源、切割机理，并介绍了获得高压水射流的基本原理和应用范围。
Removable cutting mechanism use knives with good elasticity, which attacm to the die plate tenderly and can be regulated in six directions, can be operated quickly and simply.
移动式切粒机构切刀弹性好，柔和贴合模板平面； 切刀可在六个方向上调节，操作灵活简便。
Following the introduction of the characteristics and cutting mechanism of high speed machining, we educe the feasibility of the high speed machining difficult-to-machine materials.
首先介绍了高速切削加工难加工材料的特点，通过对高速切削机理的研究，分析难加工材料高速切削加工的可行性。
Therefore, investigation on cutting mechanism of titanium alloy and optimizing the cutting parameters are essential to increase machining efficiency and to control the cutting process.
因此研究钛合金材料的切削性能，优化工艺参数对于提高加工效率、控制加工质量具有重要意义。
The abrasive water-jet cutting technology is mainly summarized on the aspects of the characteristic, cutting mechanism, crucial technology, and the influencing factor of cutting effect.
着重从磨料水射流切割技术的特点、切割机理、关键技术以及切割效果的影响因素做了综述。
The design of JL 1075 combine harvester generally divide four system which include cutting mechanism system, force by wheel driving system, chain transmission and force auxiliary system.
JL 1075联合收获机低割装置的设计大体分为四大系统：切割系统、地轮驱力系统、链传动系统和动力辅助系统。
Five, cut off the body: the cutting mechanism is winding forming, cut off the wire is the last of the spring drop of the processing action, cutting through the knife and the core to complete.
切断机构：切断机构是卷绕成形后，切断钢丝是弹簧落下的最后一个加工动作，切断时通过刀和芯来完成。
The mechanism of cutting brittle materials was studied, the impact model was established and the stress of impacting area was analyzed.
对脆性材料的切割机制进行研究，建立切割冲蚀模型，分析受冲击区的应力。
The optimized mechanism can satisfy the cutting process requirement, and enhance both the performance of flying shear and quality of workpieces.
优化后的飞剪机构满足剪切过程要求，同时提高了飞剪的剪切性能和轧件的剪切质量。
The influences of some cutting parameters on chip curvature and mechanism of chip-curling are also studied.
本文还研究了一些切削参数对切屑卷曲影响规律及切屑卷曲过程的机理。
The influences of some cutting parameters on chip curvature and mechanism of chip-curling are also studied.
本文还研究了一些切削参数对切屑卷曲影响规律及切屑卷曲过程的机理。
应用推荐