Results of cutting experiments and consumer's tryouts indicate that the cutting performances of this insert series are excellent.
切削试验和用户试用结果表明，该系列刀片具有优异的切削性能。
In cutting experiments, it can be observed and measured that the chip thickness, the tool wear, the screw thread teeth, and so on.
在切削实验中，可对切屑厚度、刀具磨损及螺纹等的形貌进行观察并测量其尺寸。
The cutting experiments show that in cutting of quenched steel the tool life of this cutter is longer than that of uncoated cutting tool.
将氮化碳涂层刀具应用于干切削领域，通过对淬火钢的干式切削试验，研究氮化碳涂层刀具的切削加工性能。
The dry and high-speed cutting experiments are carried out to study the cutting performance of turning the Fe-based PM parts by using the fine grain cemented carbide inserts.
用细晶粒硬质合金刀具进行了铁基粉末冶金零件的高速干切削试验。
Through cutting experiments in which the contact length between chip and rake face of restricted contact cutter is reduced step by step, the variation principle of cutting force is studied.
通过切削试验，研究了限制接触刀具前刀面的刀—屑接触长度逐渐减小时切削力的变化规律。
The milling force model is validated according to cutting experiments and it can offer a reliable boundary condition for the further study of NC machining distortion of aviation aluminum-alloy.
采用合理的平均力试验验证了模型的有效性，为进一步研究航空铝合金数控加工变形提供了可靠的边界条件。
The cutting experiments for difficult to machine materials have shown that the cutting rate can be increased much more, the surface quality improved and the probability of wire breaking reduced.
对难加工材料的切割实验表明：复合工艺能较大幅度地提高加工效率，改善表面质量，降低断丝概率。
In experiments with dogs, they determined that cutting nerves between the brain and its frontal lobe - the so-called "seat of reason" - left the animals quiet.
他们在狗身上做实验后，判断通过切断连接大脑和额叶——所谓的“理性之所在”——的神经，动物就会变得安静。
In experiments with dogs, they determined that cutting nerves between the brain and its frontallobe — the so-called "seat of reason" — left the animals quiet.
他们在狗身上做实验后，判断通过切断连接大脑和额叶叶——所谓的“理性之所在”—— 的神经，动物就会变得安静。
Experiments of cutting concrete block were conducted and the reason for different fonns on different cutting depth was analyzed.
对混凝土试块进行切割实验，并对分析同切割深度的不同形态所产生的原因。
Andy Foulds is web designer and photographer. This is his portfolio of cutting edge work and personal experiments.
安迪·福尔兹是网页设计师和摄影师。这是他的工作和个人尖端实验组合。
The experiments of cutting stainless steel gear wheel with fiber laser precision processing system, were carried out.
利用光纤激光精密加工系统进行了不锈钢齿轮的切割实验。
The experiments to verify the phase characteristics of cutting chatter are conducted.
最后对切削颤振的相位特性进行了试验考证。
Based on the experiments of cutting engineering ceramics by diamond saw blades, the factors of influencing cutting forces are analyzed.
在用金刚石锯片切割工程陶瓷材料的切削试验基础上，对影响切削力的各种因素进行了分析。
During the turning and broaching operation of titanium alloys, experiments and researches of cutting temperatures are of great significance.
在钛合金车削和拉削加工过程中，对切削温度进行试验研究有着十分重要的意义。
In this paper, the experiments and theoretical analyses are made about the occurring conditions and regularities of this phenomenon, which enriches the ultrasonic vibration cutting theory.
本文对超越性现象产生的条件、规律进行了试验和理论分析，丰富了超声波振动切削理论。
Based on experiments of the face cutting of the weak workpiece, effects of the ultrasonic elliptical vibration cutting on the weak workpiece are researched.
根据弱刚度零件端面切削实验，研究了超声波椭圆振动切削对弱刚度零件的切削效果。
Through experiments involving the diamond wire saw cutting a seabed pipeline, the relations of the wire saw's cutting technological parameters was obtained.
对海底石油管道进行了切割试验，得到了绳锯机的切削工艺参数之间的关系。
The isochromatic fringes graphs of smooth blasting and cutting seam blasting of pipe protecting borehole wall were obtained upon dynamic photo-elasticity experiments on both kinds of blasting.
进行了光面护壁爆破和切缝护壁爆破技术的动态光弹性试验，获得了光面护壁爆破和切缝护壁爆破过程的等差条纹图。
The method to automatically control cutting chatter based on on-line recognition of stable cutting point is studied by experiments.
通过试验研究了切削颤振自动控制的稳定切削点在线识别方法。
Experiments indicate that this method has a high ratio of recognition in a range of cutting condition and even can detect novel tool faults.
实验结果表明，该方法不仅可以在多种切削条件下获得较高的识别率，还可以识别出新的刀具故障。
On the basis of experiments and the conversation law of optimal cutting temperature, the equation of maxim dimension tool life is derived and the relation parameters of the equation are also given.
在实验研究的基础上，推导了基于最佳切削温度守恒定律的刀具最大尺寸使用寿命方程并给出了相关参数。
The analyzing method of grey relativity is used for identifying main error sources under different cutting conditions, and these results are verified by experiments.
采用灰色关联度分析方法识别不同切削条件下的主要误差源，并进行了实验验证。
The limit cutting depth of the machining system with optimal controlling spindle speed is studied by experiments.
对优控主轴转速系统的极限切削深度进行了试验考证。
The experiments, proved that developmental quality of root system of cutting seedling and lignification degree of root system during seedling-laying are key factors to influence survival rate.
本文通过试验证实了扦插根系发育质量与倒苗时根系木质化程度是影响定植苗成活的关键。
The results of industrial experiments have showed that this system can realize high accurate cutting to length and high productivity.
工业试验结果表明，本系统能够实现高精度定尺锯切及高生产率。
Based on the experiments of high-speed milling titanium alloy TC4 the effects of cutting parameters, the materials of the milling cutters on cutter we ar are discussed.
通过高速铣削钛合金tc4的切削试验，讨论了切削参数、刀具材料等对刀具磨损的影响。
Based on the mechanics analysis, the mathematical model of the cutting torque was established, and the validity of the model was demonstrated by the experiments.
通过动力学分析，得到了对于单叶双曲面平板直刃滚筒式切碎器切割秸秆层切割阻力矩的数学模型，经过试验验证验证了其有效性。
Based on the mechanics analysis, the mathematical model of the cutting torque was established, and the validity of the model was demonstrated by the experiments.
通过动力学分析，得到了对于单叶双曲面平板直刃滚筒式切碎器切割秸秆层切割阻力矩的数学模型，经过试验验证验证了其有效性。
应用推荐