According to the 3d cutter radius compensation theory, the path planning of the cutter location point may be determined.
根据三维刀具半径补偿原理，确定了刀具的刀位点运动轨迹。
It introduced imitating surfaces with bicubic parametric curves, feed length, cutter location and vector of cutter location.
介绍用双三次参数曲线拟合曲面、平头铣刀的直径、铣削的步长及行距选择、刀位点和刀轴矢量的计算。
The principles for obtaining numerical control (NC) data and for generating collision free cutter location data were developed for a 6TPS tool.
以6-TPS型并联机床为结构模型，阐述了数控代码生成原理及无干涉刀位文件的生成方法。
Workpieces with the cutter location points on the same plane are usually milled by window-frame method by 2-axis NC machining with flat-end mill.
环切加工是常用的数控二轴联动铣削方式，用于加工工位在同一平面上的零件；
A new algorithm of automatic generation of interference free cutter location path for nc machining of free form surfaces with flat end cutters is proposed.
提出了一种新的曲面平头立铣刀加工无干涉刀位轨迹自动生成的算法。
It presents the formulae for computing the cutter location data, and introduces the approaches to deal with inspection of constraints and self - interference.
推导出刀位数据的计算公式，给出约束检验、自干涉检验等常遇问题的处理方法。
According to the basic principle of LC oscillator, the cutter contact sensing system and locomotion strategy are designed to realize cutter location automatically.
并根据LC正弦振荡电路基本原理，设计刀具接触传感系统和刀具进给策略，实现对刀具的高精度自动定位。
As an important part in the nc programming, the function of post-processing is to transfer the cutter location file into the nc program suitable to nc machine tools.
作为数控编程技术的重要内容，后置处理的作用是将通用的刀位文件转换成适合于数控机床加工的NC程序。
The post processing is an important part in the programming of numerical control, by using it, the cutter location file from CAM system can be converted into machining code.
后置处理是数控编程的重要环节，它的作用是将CAM系统生成的刀轨文件转化为机床的加工代码。
The finish cutter location data were computed using the equidistant offset surface method, and the machining row distances were acquired by the control of the residual height.
应用等距偏移曲面法计算出曲面数控精加工刀位数据，并通过控制切削残留高度的方法求得切削行距。
Based on the specialities of numerical control (NC) of power spinning machine tool, this paper described the process of generating NC code from the cutter location track file.
描述了根据数控强旋机的特性，从已有的刀具轨迹文件出发，经过一系列处理生成了数控代码的过程。
An algorithm of 3-axis interference-free tool path is researched and realized by cutter location surface and protection surface of discrete triangular facets of machined surface.
介绍和扩大了数控加工中的刀位面和保护面的概念，研究和实现了一种基于曲面离散生成三轴加工无干涉刀具轨迹的算法。
The postprocessing technique is an important field in the UG CAM, the main mission is to make the cutter location source file that is created by CAM the acceptable numeric control document.
后处理技术是UGCAM中一个重要环节，其主要任务是把CAM软件生成的加工刀位源文件转换成机床可接受的数控代码文件。
An error measuring system for multi-location numerical control cutter holder was developed by adopted non-contact photoelectric measuring method.
采用非接触光电式测量方法，设计了多工位数控刀架误差测量系统。
An error measuring system for multi-location numerical control cutter holder was developed by adopted non-contact photoelectric measuring method.
采用非接触光电式测量方法，设计了多工位数控刀架误差测量系统。
应用推荐