This article introduces C200H programmable controller application to QZX1300 paper cutter control system, and cutter operates more automatic, easier and more reliable.
主要介绍应用C200 H可编程序控制器实现的QZX1300数显切纸机的裁切控制系统，从而大大提高了自动化程度，使操作简便，运行安全可靠。
In this paper, we introduce the principle of metallographical cutter control system and the design method of software and hardware based on the AT89S52 singal-chip microcomputer.
介绍了以AT 89s52单片机为核心的金相切割机控制系统原理和软硬件设计方法。
Parsons recommended a method of automatic machine control that would guide a milling cutter to produce a "thru-axis curve" in order to generate smooth profiles on work pieces.
为了在工件上加工光滑的轮廓，帕森提出了一种自动的机床控制方式，它能够引导铣床刀具加工出一种“过轴曲线”。
Based on the fact, then arranged the operation purview in reason, and presented the better control project of Cutter.
然后根据实际，合理安排现场和控制室的操作权限，给出了切实可行的切粒机控制方案。
The structure and principle of a Rapid Auto-Cutter of thin tube is introduced, the relevant hardware and software of the control system are analyzed.
介绍了一种薄壁管件快速切割机的结构和工作原理，分析了相应控制系统的硬件构成及软件实现方案。
The algorithm can be used to control the orientation of the cutter so as to avoid over-cutting in surface machining.
该算法可用于曲面加工过程中的刀具姿态控制，以避免曲面的过切现象。
With the use of differential control, could make the cutter which installed on the disc could moved along radial direction.
通过差动控制，可使安装在花盘上的刀具能沿径向作进给运动。
The key problem of mismatch control and manufacture of symmetric arc-shaped gears is perfectly solved by using suitable cutter tilt and new generating method.
根据刀盘参数，选用合适的刀倾角，采用新的展成法，圆满地解决了失配量的控制和加工这种齿轮的关键性问题。
PC sets the parameters, executes the milling cutter radius compensation, draws the graphics of the work-piece machined and realizes local control.
PC机主要负责有关参数设定、刀具半径补偿的离线运算、被加工工件图形的可视化以及实现本地控制等功能。
The series of disc chippers is made up of seat, cutter disc, feed inlet port, shell, electric control system, etc.
系列盘式削片机由机座、刀盘、进料口、罩壳、电控系统等部分组成。
This paper focuses on PLC for the control of the Dividing Head, PLC for the control of the Multi-spindle and PLC on the Recognition of cutter and choice knife.
着重论述了PLC对分度头的控制，PLC对多主轴的控制以及PLC实现对刀库中刀具的识别与选刀。
This series of re-cutter is made up of seat, rotor, feeding roller, shell, hydraulic pressure system, electric control system, etc.
系列再碎机由机座、转子、喂料辊(口)，罩盖、液压系统、电控系统等部分组成。
Based on the specialities of numerical control (NC) of power spinning machine tool, this paper described the process of generating NC code from the cutter location track file.
描述了根据数控强旋机的特性，从已有的刀具轨迹文件出发，经过一系列处理生成了数控代码的过程。
Second-ranking esau cutter has inch dynamic and speed adjustment function, make lasting control adjustment homework more convenient.
扫刀具有寸动及调速功能，使结帮控制的调整作业更为方便。
It has permanent magnet base, unique cutter structure, effective spark control and portability. It suited to special environment to drill.
它具有可手控的永久磁性基座、独特的刀具结构、有效的火花控制和极大的便携性，适用于特殊环境下的钻孔作业。
Center coordinate of hinge joining point between control shaft and host shaft parts is calculated to determine machining posture of cutter.
求出控制轴与主轴部件铰接点中心坐标，以确定刀具加工姿态。
The finish cutter location data were computed using the equidistant offset surface method, and the machining row distances were acquired by the control of the residual height.
应用等距偏移曲面法计算出曲面数控精加工刀位数据，并通过控制切削残留高度的方法求得切削行距。
The control of fixed length cutter for high speed flying shear with double rollers is one of the problems which is needed to solve in the processing line for cutting hot plate blank.
高速飞剪的定长切头控制是热板坯剪切线中需要解决的课题之一，本文着重介绍了定长切头的意义、控制思想及控制方案，并对部分参数进行模拟计算。
After studying the electric control system of Quarry Cutter Machine, we bring up a system based on PLC and HMI control and realize it in technology.
本文通过对矿山荒料切石机的电气控制系统进行了调研。提出了基于P LC与HMI的控制系统及技术实现。
This article discussed the multi-thread technology application in numerical control system software design of flame cutter based on the movement control card.
讨论了基于运动控制卡的火焰切割机数控系统的软件设计中多线程技术的应用。
Cutter radius offset orders in numerical control (NC) milling manufacturing procedure are expounded and cutter radius offset procedure is analyzed.
阐述了数控铣削加工过程中的刀具半径补偿指令和刀具半径补偿过程。
Microcomputer control system can be according to the customers needed to multiple-unit memory storage, don't cutting die setting again when replace the cutter.
微电脑控制系统可根据工作所需刀模形态进行多组记忆侟储，更换刀模时，可不必再重新进行刀模设定。
In numerical control system, cutter radius compensation always USES a straight transition method.
在数控系统中刀具半径补偿的方法常采用直线过渡。
The principles for obtaining numerical control (NC) data and for generating collision free cutter location data were developed for a 6TPS tool.
以6-TPS型并联机床为结构模型，阐述了数控代码生成原理及无干涉刀位文件的生成方法。
The design of the special cutter makes three coordinate numerical control slope cutting metal sheets be realized.
专用刀具的设计使三坐标数控倾斜切削金属薄板得以实现。
The basic function of the CAM module, including setting up cutter manager, tool path generating, tool path simulating, and numerical control code automatically producing.
CAM基本功能模块，包括刀具库管理、刀具轨迹生成、后置处理、轨迹仿真、数控代码自动生成等功能。
The postprocessing technique is an important field in the UG CAM, the main mission is to make the cutter location source file that is created by CAM the acceptable numeric control document.
后处理技术是UGCAM中一个重要环节，其主要任务是把CAM软件生成的加工刀位源文件转换成机床可接受的数控代码文件。
How to control the normal stress between sealing faces is a critical factor while using metal face seals for rolling cutter rock bits.
在牙轮钻头中成功应用单金属浮动金属密封结构的关键在于控制密封端面之间的接触压力。
This article is about how to fully make use of the command of cutter length compensation and the using skills in numerical control programming.
介绍了在数控机床编程中，如何能更好地使用刀具长度补偿指令及其使用技巧。
The preparation of the control procedures, this paper introduces the TBM Systems and TBM cutter head drive propulsion system thrust automatic control and torque control of these two areas.
对控制程序的编写，本文着重介绍了掘进机刀盘驱动系统与TBM自动推进系统的推力控制和扭矩控制这两个方面。
应用推荐