I plant substantial prize-butyl Wind tires, curing resin demand pure-butyl.
我厂大量求购丁基风胎，需求树脂硫化的纯丁基。
Epoxy resin (E-51) and curing agent (T-31) had been applied to develop a room-temperature and quick curing resin.
以环氧树脂e - 51和T - 31固化剂为主体研究了一种新型的室温快速固化环氧树脂体系。
Methods: 14 fractured crown fragments of incisors were immediate reattached using dual-curing resin cement system.
方法：14例冠折上前牙用双重固化树脂粘接系统进行断端即刻再接修复，临床观察1年。
The teeth were putted in stainless steel die and the roots were embedded in self-curing resin , the crown out of the resin.
牙齿放在自制不锈钢模具内。 牙根用自凝树脂包埋，牙冠暴露。
And it is a light curing resin as dispersant, the LED on the machine - UV light irradiation, resin curing film caused by chemical reaction.
而它是以光固化树脂为分散剂，以机器上的LED-UV光能照射，引起化学反应使树脂固化成膜。
To determine the theoretical model of curing resin line in rapid prototyping, the scanning motion and curing process are particularly analyzed.
为了确定快速成型中树脂固化线条的理论模型，对扫描动作和固化过程进行了详细分析。
A novel 3d printing technique suspends light-curing resin in a gelatinous medium rather than using conventional structural support material during the build process.
一种新颖的3d印刷技术暂停光固化树脂胶状介质，而不是在构建过程中使用传统的结构支撑材料。
The influence of temperature on thermal expansion of photo-curing resin used for rapid prototype(RP)and the preparation process of the rapid-precision casting ceramic shell were studied.
研究了装炉温度对快速成形用光固化树脂热膨胀特性的影响和型壳制备工艺。
The surface of the finished glass has the power to adsorb out of the resin mixture one or more constituent necessary for complete curing of the resin.
处理过的玻璃表面有从树脂混合物中吸附出一种或几种组分的能力，而这些组分对树脂完全固化是很必要的。
This kind of resin composite manhole cover with glass fiber and resin as the basic material, curing agent, accelerator as auxiliary material.
这种树脂复合型井盖以玻璃纤维和树脂为基本材料，以固化剂、促进剂等为辅助材料制成。
If the volatile vapor pressure in the curing laminate exceeds the actual pressure on the liquid resin prior to gelation, then void formation and growth will occur.
如果树脂凝胶前挥发物的蒸气压力超过树脂流体的压力，则会在层板中生成孔隙，而且孔会长大。
Conclusion the fracture strength of premolar teeth filled with light curing composite resin was higher than filled with amalgam after root canal therapy.
结论根管治疗后用光固化树脂充填前磨牙的各类洞，牙体的抗折强度优于用银汞充填者。
Results showed that light curing composite resin was better than glass ionomer in wedge-shaped ditch restoration.
结果表明，光固化树脂修复楔状缺损明显优于玻璃离子水门汀。
The gelation time of this epoxy resin with modified liquid anhydride was related to the chemical structure and the composition of epoxy resin, curing temperature and accelerator.
环氧树脂与改性液体酸酐体系的凝胶时间与环氧树脂的结构与组成、固化温度及促进剂等因素有关；
Then, considering many respect such as light source, diluent and photoinitiator, mainly improving photoinitiating system, we found the solutions to oxygen inhibition of acrylic resin in uv-curing.
然后，结合丙烯酸树脂的光固化特点，从光源、活性稀释剂、引发剂体系等多方面考虑，主要是改进引发剂体系，找到了合适的抑制表面氧阻聚的方法。
The sulfonium salt has better curing character to epoxy resin.
该硫鎓盐对环氧树脂具有良好的固化性能。
Electron beam curing of various blends of epoxy resin was studied in this paper.
对几种环氧树脂混合体系的电子束固化进行了研究。
The results showed that the structure of anion part in diphenyliodonium could affect the laser curing velocity of epoxy resin greatly.
结果表明，碘盐阴离子部分的结构对环氧树脂的光固化速度有很大影响；
Based on analyzing the curing characteristics of the resin system and the isothermal viscosity curves, an engineering viscosity model was developed.
根据对树脂固化特性和等温粘度曲线的分析，建立了树脂体系的工程粘度模型。
It was studied on the curing activity of DCPD phenol epoxy resin with anhydrides and amines.
研究了DCPD酚环氧树脂与酸酐及胺类固化剂的固化反应活性。
Using lead benzoxy as curing agent, cured epoxy resin was analyzed by means of IR spectrum and DSC curves. Lead benzoxy was considered to be catalytic curing agent.
采用苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。
Based on the resin curing the hardness and thermal deformation temperature higher, but also has a good climate of tolerance and toughness.
其基础树脂固化后的硬度和热变形温度较高，同时又具有良好韧性和耐气候性。
To compare the impact of coloring agents on resin curing, the experiment was carried out to study the curing layer depth of resin mixed with different kinds of coloring agents under laser scanning.
研究了混入不同着色剂的液态光敏树脂在激光扫描照射下树脂单层固化厚度的变化规律，比较了不同着色剂对树脂固化程度的影响。
An ultraviolet curing powder coating UG 1 was prepared with an ultraviolet curing star grafted acrylate resin as a main film forming material.
用可紫外光固化的星形支化丙烯酸酯树脂作主要成膜物，制成了UG1紫外光固化粉末涂料。
In this paper is described the principle for and the experiments on curing of thermoset-ting resin with microwave heating.
本文介绍了热固性树脂用微波加热固化的原理，并报导了环氧树脂微波固化的实验研究。
Electron beam curing of resin matrix composites is a cost effective method compared with conventional heat curing.
与普通的热固化方法相比，树脂基复合材料的电子束固化是一种成本有效的固化方法。
The curing effect of different kind of UF resin in different curing system is different, chemical structure, fe and mechanics properties of cured UF resin is different.
不同固化体系对不同种类UF树脂的固化效果不同，固化后树脂的结构不同，其力学性能和甲醛释放能力也不同。
Some methods of research on waterborne epoxy resin are introduced systemically. And curing agents for waterborne epoxy resin is described in this paper.
系统介绍了水性环氧树脂的研究方法，并比较了各种方法之间的优劣，简要介绍了水性环氧树脂的固化。
Some methods of research on waterborne epoxy resin are introduced systemically. And curing agents for waterborne epoxy resin is described in this paper.
系统介绍了水性环氧树脂的研究方法，并比较了各种方法之间的优劣，简要介绍了水性环氧树脂的固化。
应用推荐