The curing reaction of epoxy resin, which is common used in metal conductive paste, was studied.
主要研究了金属导电浆料中常用的环氧树脂的固化。
A special chemical that promotes or accelerates the curing reaction or reduces stoving temperature.
一种专门的化学材料，可以提升或促进固化反应或降低烘烤温度。
It was found by analysing the curing curve that the sulfur curing reaction obeyed the first order reaction low.
对硫化曲线进行解析发现硫黄硫化反应服从一级反应规律。
The influence of curing reaction heat on curing temperature field of cubic rubber block and tire was investigated.
探讨长方体胶块和轮胎硫化反应热对硫化温度场的影响。
The curing reaction of waterborne acrylic resin with HMMM has been studied by using the torsional braid analysis (TBA).
用动力学扭辫分析(tba)法研究了水溶性丙烯酸酯树脂与六甲氧基甲基三聚氰胺的固化反应。
The curing reaction of the resin was investigated by using FT-IR and DSC technique and the characteristics were described.
用FT - IR和DSC技术检测了树脂的固化反应；最后对树脂的性能进行了表征。
Since the curing reaction stops when the hardener has completed reaction with the base resin, they do not go brittle with age.
硬化 剂反应完成时修复反应也停止了，他们不会随老化变的脆弱。
The results showed that the amount of ATPU curing agent have an obvious influence on the curing reaction heat and curing degree.
结果表明，ATPU的含量对固化放热特征，放热量和固化程度等有显著的影响。
Heat resistance, curing reaction, and morphology of the modified phenolic resin system were characterized by TG, DSC, SEM and tem.
借助TG、DSC、SEM和TEM对改性酚醛树脂体系的耐热性能、固化反应和微观形态进行了表征。
In this paper, effects of peroxide on curing reaction of modified BMI resin (designed as 4501a) with low dielectric loss were studied.
本文研究了有机过氧化物引发剂对低介电损耗的改性双马来酞亚胺树脂4501A固化反应的影响。
The kinetics analysis of the curing reaction showed that reactive activity of BAPP with epoxy resin is slightly higher than that of DDM.
固化反应动力学分析表明，BAPP与环氧树脂的 反应活性较DDM的 反应活性略高。
The kinetic curing reaction of hybrid materials performs by differential scanning calorimetry (DSC) technique at different heating rate.
利用差示扫描量热仪对杂化材料的固化动力学进行了研究。
A cationic polyacrylate resin was synthesized. The curing reaction of cationic polyacrylates with blocked isocyanates and amino resin was studied.
摘要合成了阳离子型聚丙烯酸酯树脂，并分别用封闭型异氰酸酯及氨基树脂对其交联固化。
Results show that EPMPS can not only catalyze the curing reaction of ce, but also significantly improve the toughness and moisture-resistance of cured ce resin.
研究结果表明，EPMPS不仅显著加速了CE单体的固化反应，而且有效提高了CE固化树脂的冲击强度和耐湿性。
The curing reaction process of bamboo liquefaction phenolic resin with different molar ratio was studied by non-isothermal differential scanning calorimetry(DSC).
采用非等温差示热量扫描DSC曲线方法探讨了竹材液化物酚醛树脂胶不同物质的量之比时的固化反应过程。
The reaction process and curing mechanism were basically identical to the curing reaction of bisphenol A epoxy resin with anhydride in the presence of accelerator.
固化反应过程及固化机理与促进剂作用下酸酐固化双酚A型环氧树脂的反应基本相同。
A series of acrylic-polyurethane resin with different structure were prepared, and the influence of the structure and molecular weight of the polymers on UV-curing reaction was studed.
合成了一系列不同结构的丙烯酸聚氨酯预聚物，重点讨论预聚物的分子结构及相对分子质量对紫外光固化反应的影响。
After comparing the simulated curing temperature with the tested curing temperature, it was concluded that curing reaction heat had obvious effect on the curing temperature field of...
通过硫化模拟温度与实测温度比较得出，胶块和轮胎硫化反应热对硫化温度场有明显影响。
Three kinds of imidazole salt were synthesized. The characteristics of their curing reaction and the effect of the characteristics on the properties 0f the cured product were investigated.
本文合成了三种咪唑盐，并就其固化反应特点及对固化物性能的影响作了初步探讨。
Their catalytic activities to the curing reaction of NEPE and HTPB solid propellants were studied by thermal analysis methods, formulation process research and performance test of propellants.
通过热分析方法、推进剂配方工艺研究与性能测试，探讨了它们对NEPE和丁羟固体推进剂固化反应的催化作用。
This paper studied the influence of chemical structure on the reaction rate and curing effect in epoxy resin systems under electron beam (EB) radiation.
研究了化学结构对环氧树脂电子束辐射反应速率和辐射固化效果的影响。
Epoxy powdered coating with low glossiness can be prepared by adding two curing agents with different reaction activation.
采用两种不同反应活性的固化剂，可制得低光泽的环氧粉末涂料。
It was shown that the curing process of resoles, at first, proceeded by condensation reaction of methylol groups, and the formation of dimethylene ether linkage was predominant.
结果表明热固性酚醛树脂的固化过程，首先是羟甲基发生缩合反应，缩合反应形成醚键是主要的。
A study was made on concrete creep under different curing temperatures, and the comprehensive effects of time and temperature on creep development were expressed with the chemical reaction rate.
对不同养护温度下的混凝土徐变进行了研究，用化学反应速率描述温度对混凝土徐变的影响。
The dental pulp reaction will appear in different degree after the light curing composite is filled.
光固化树脂充填后可能出现不同程度的牙髓反应。
By simulating practical temperature procedure of curing, the cure kinetic equations were verified by means of determining the residual heat of reaction of samples with different cure degrees.
并模拟实际固化温度历程，采用测定不同固化阶段样品残余反应热的方法对固化反应动力学方程进行了验证。
Effects of process conditions such as different curing temperature, curing time, starting reaction temperature and casting flaw on polyurethane elastomers mechanical properties are investigated.
研究了工艺条件(不同固化温度、固化时间和初始反应温度)以及浇注成型产生的缺陷对聚氨酯弹性体力学性能的影响。
The numerical simulation of curing processes in resin transfer molding is helpful to control the chemical reaction, material structures and properties.
树脂传递模塑工艺的固化过程数值模拟有助于化学反应、材料结构与性能的控制，具有重要的科学意义和工程价值。
This paper explored the rules of the synthesis, such as the effect of the NCO/OH and the curing condition on the performance and reaction.
本文研究了单组分湿固化聚氨酯胶粘剂合成中的规律，如NCO/OH比例对反应及产品性能的影晌以及固化条件对粘接性能的影响。
This paper explored the rules of the synthesis, such as the effect of the NCO/OH and the curing condition on the performance and reaction.
本文研究了单组分湿固化聚氨酯胶粘剂合成中的规律，如NCO/OH比例对反应及产品性能的影晌以及固化条件对粘接性能的影响。
应用推荐